Berenson Meadow Series 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, - 2097-4BPN-P

Berenson Meadow Series Pull For Cabinet Use

Berenson Meadow Series pull gives a defined 96 mm center to center mounting span, which sets clear hole spacing for cabinet doors or drawers so layout is straightforward on new work or replacements. Brushed nickel finish provides a muted metallic look, which helps this pull blend into many cabinet styles without reflecting excessive glare under task lighting. Aluminum material keeps the pull relatively light, which can matter on smaller doors or thin drawer fronts where added weight is unwanted. Overall length of 5-7/16 inches establishes how much grip area is available across the front, which helps when aligning multiple pulls in a row on wide banks of drawers. Projection of 1-3/8 inches sets the standoff from the cabinet face, which creates finger clearance for a comfortable pull action. Width of 11/16 inch defines the front profile, which affects how the pull feels in the hand during daily use.

Key Meadow Pull Details That Support Jobs

• The 96 mm center to center measurement fixes drilling distance between mounting points, which supports accurate jig setup and consistent alignment across multiple cabinet fronts in a run.
• The 5-7/16 inch overall length defines the footprint on the door or drawer, which helps position the pull so it is visually balanced on narrow or wider faces during layout.
• The 1-3/8 inch projection determines how far the pull stands off the surface, which provides working space for fingers while also keeping the pull close enough for tight kitchen or bath clearances.
• The 11/16 inch width controls how broad the gripping surface feels, which influences comfort for repeated opening and closing on busy cabinet installations.
• The brushed nickel finish applied to the aluminum pull offers a soft metallic appearance, which supports a consistent look with other brushed nickel decorative hardware in the same room.

Mounting And Fit Details For This Meadow Pull

The 96 mm center to center dimension on this Meadow pull sets the distance between mounting holes, which allows straightforward transfer to door or drawer fronts using standard metric drilling patterns. The 5-7/16 inch total length defines how far the pull spans across the face, which is useful when aligning pulls to stile edges or drawer borders. A 1-3/8 inch projection positions the gripping surface away from the cabinet, which gives working room for fingers without extending excessively into walkways. With a width of 11/16 inch, the front face presents a moderate contact area, which affects both the visual line on the cabinet and the feel when grabbing from above or below. Aluminum construction keeps overall mass down, which can be important when hardware weight contributes to how lightly small doors swing on their hinges.

Using The Berenson Meadow Series Pull In Projects

Where This 96 mm Center To Center Pull Fits

This Berenson Meadow Series pull, identified as 2097-4BPN-P, uses a 96 mm center to center layout, which is a common metric spacing for cabinet hardware runs. That spacing works well on many kitchen, bath, or shop cabinets that already follow 96 mm drilling patterns, which helps when matching existing fronts during updates. Overall length of 5-7/16 inches lets the pull sit proportionally on medium-width drawers and doors, which matters in banks of cabinets where visual rhythm across fronts is important. The 11/16 inch width keeps the profile relatively slim, which can suit installations where the designer wants a lighter look rather than a heavy bar. Brushed nickel finish aligns with many hinge and knob finishes in the same tone family, which supports a coordinated hardware scheme across different cabinet components. Aluminum material helps avoid a bulky feel on lighter cabinetry, which can be important when hardware scale needs to stay in line with narrow face frames or thinner drawer fronts.

Why Meadow Series Details Support Repeatable Results

The defined 96 mm center to center value on this Meadow aluminum cabinet pull makes measurement repeatable, which simplifies drilling multiple fronts using a single template setting. When that spacing is used throughout a project, installers can move quickly from door to drawer while keeping hardware lined up across rows and columns. The 1-3/8 inch projection provides predictable clearance from the cabinet surface, which reduces variation in how far different pulls extend when used alongside other Meadow Series cabinet hardware with matching specifications. Width of 11/16 inch and length of 5-7/16 inches together define the mounting footprint, which helps predict how much of any previous hardware imprint will be covered during replacement work. The brushed nickel finish on the aluminum pull delivers a consistent surface appearance, which matters when several pulls are installed side by side and the goal is a uniform look at eye level. The specific part number 2097-4BPN-P ties these dimensions and finish to a single SKU, which aids in reordering the same pull for add-on cabinetry or future remodel phases.

Common Questions About This Meadow Cabinet Pull

Select This Meadow Pull For Matching Cabinet Runs

The Berenson Meadow Series pull with 96 mm center to center spacing, 5-7/16 inch length, and 1-3/8 inch projection offers defined dimensions for consistent cabinet layouts. Brushed nickel finish on aluminum supports a unified look with other Meadow Series cabinet hardware using the same specifications across a project. Choosing the 2097-4BPN-P part number by Wurth Baer Supply aligns your cabinet work with a repeatable pull size that can be used again on future doors or drawers.