Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The MEADOW PULL 128MM CC BRSH NKL is a Berenson Meadow Series brushed nickel pull designed as a functional handle for cabinet doors and drawers, giving projects a consistent 5-1/16 inch (128 mm) center-to-center layout that matches common drilling patterns in shops. The aluminum material keeps each pull light while still providing a defined handhold, which is helpful on larger fronts where multiple pulls are used. A length of 6-5/8 inches provides finger clearance across wider rails, supporting a comfortable grip when opening heavier cabinet faces. A projection of 1-3/8 inches stands the pull off the face enough for fingers to wrap behind it, which reduces knuckle contact with the surface. The 11/16 inch width gives the pull a slim profile along the stile or drawer front, which can help align visually with narrow frame components and modern cabinet lines.
This Berenson Meadow Series pull is drilled for a 5-1/16 inch (128 mm) center to center layout, so the mounting holes are fixed at that spacing for use on cabinet doors and drawers. The length of 6-5/8 inches means there is material extending past the screw centers on both sides, which helps when aligning the pull to door edges or drawer fronts where reveal sizing matters. With a projection of 1-3/8 inches, the pull stands off the face far enough that fingers can wrap from below or above, which is useful on both base cabinets and wall cabinets. The 11/16 inch width keeps the footprint narrow on the surface, helping it sit cleanly on face frames, slab fronts, or panel doors without occupying excessive rail height.
The Berenson Meadow Series 5-1/16 inch (128 mm) center to center brushed nickel pull is suited to cabinet doors and drawers that follow the 128 mm drilling standard, so it can be applied across kitchens, vanities, and storage runs using that spacing. The 6-5/8 inch overall length gives it presence on both narrow and medium-width fronts, which helps maintain proportional hardware sizing from smaller drawers up through tall doors. Its 11/16 inch width keeps the handle visually lean, which works well with modern or transitional cabinet styles that favor clean lines and modest hardware. Because the pull is made from aluminum, it contributes minimal added weight to each door or drawer front, which is helpful when many pulls are used on larger installations where hardware mass can add up. The brushed nickel finish ties into other brushed nickel decorative hardware components, allowing this pull to align with hinges, knobs, and other visible metal elements using the same finish family.
The 5-1/16 inch (128 mm) center to center measurement on this pull provides a clear drilling target, which helps installers repeat the same layout from cabinet to cabinet without reworking hole positions. With a projection of 1-3/8 inches, the pull offers enough stand-off for a positive grip, which is useful on deeper drawers and heavier fronts where users need reliable leverage. The 6-5/8 inch overall length creates a balanced look around the mounting points, helping hardware lines appear straight when doors are ganged in runs or when drawer stacks are aligned vertically. At 11/16 inch wide, the pull leaves space around it on the rail or drawer face, which can help when clearances near adjacent doors or appliances are tight. The combination of aluminum construction and brushed nickel finish delivers a metal pull that is both light and visually coordinated, which supports consistent results across a full room of cabinets using the same part number 2099-4BPN-P.
The Berenson Meadow Series pull has a 5-1/16 inch (128 mm) center to center measurement, so the mounting holes are spaced for that standard cabinet drilling pattern.
The Berenson Meadow 2099-4BPN-P pull has a total length of 6-5/8 inches, giving some handle extension beyond the 128 mm mounting span for easier gripping and visual centering.
The Meadow Series pull is made from aluminum with a brushed nickel finish, combining a light metal body with a muted metallic appearance for cabinets using brushed nickel hardware.
The pull projects 1-3/8 inches from the cabinet surface, providing space for fingers to wrap behind the handle when opening doors and drawers.
The Berenson Meadow 128 mm pull has a width of 11/16 inch, giving it a relatively slim footprint on the door or drawer face for a clean hardware line.
The manufacturer part number is 2099-4BPN-P, which identifies this specific Meadow Series 5-1/16 inch center to center brushed nickel aluminum pull.
The Berenson Meadow Series 5-1/16 inch (128 mm) center to center brushed nickel pull combines aluminum construction, a 6-5/8 inch overall length, and a 1-3/8 inch projection to support practical cabinet operation on doors and drawers. Its 11/16 inch width and brushed nickel finish help it align with modern and transitional cabinet designs where a lean, metal handle is preferred. For projects built around a 128 mm drilling pattern, using the Meadow pull 2099-4BPN-P allows installers to repeat a single size and finish across the run while maintaining consistent grip and appearance.
Sold In: 1 Each
