Berenson Meadow Brushed Nickel Pull For Cabinets

Berenson Meadow brushed nickel pull is an aluminum cabinet handle designed for projects calling for a 10-1/16 inch (256 mm) center to center layout, so it matches drill patterns already set for this size. The brushed nickel finish provides a muted metal look, helping hardware sit cleanly with doors and drawer fronts that use similar tones. Aluminum construction keeps the pull lightweight, which supports straightforward handling when positioning and fastening to cabinet fronts. At 11-11/16 inches overall length, this pull creates a long gripping surface that spans wider drawer fronts or taller doors, helping hands find a consistent grab point. A 1-3/8 inch projection sets the handle off the surface enough for fingers to wrap behind comfortably, which matters when installed on thicker cabinet fronts. The 11/16 inch width gives a modest face profile, balancing hand contact with a streamlined appearance on residential or commercial casework.

Key Berenson Meadow Pull Details For Projects

• The 10-1/16 inch (256 mm) center to center dimension lets this Meadow series pull fit layouts drilled to that standard spread, which is common on wider cabinet drawers and doors for consistent alignment across a run.
• An overall length of 11-11/16 inches means the pull visually anchors larger fronts, helping hardware scale with tall pantry doors or deep drawers so the handle does not look undersized on broad surfaces.
• The 1-3/8 inch projection provides hand clearance from the cabinet face, which supports easier gripping for users and reduces knuckle contact with finished fronts during everyday door and drawer operation.
• A width of 11/16 inch offers a slim frontal profile, giving enough surface for a solid feel in hand while keeping the hardware from appearing bulky on modern or transitional cabinet designs.
• The brushed nickel finish on this aluminum pull delivers a softened metallic look that aligns with many brushed fixtures, helping create a unified appearance across knobs, pulls, and other decorative hardware.

Mounting Dimensions That Support Straightforward Fit

The Meadow series pull is built around a 10-1/16 inch (256 mm) center to center measurement, so installers can match it directly to that hole spacing on cabinet fronts. This fixed spread helps maintain uniform hardware placement across banks of doors and drawers laid out to the same dimension. With an overall length of 11-11/16 inches, there is clear visual reference at each end while aligning the pull parallel to door or drawer edges. The 1-3/8 inch projection from the mounting surface provides a predictable stand-off, which keeps hand clearance consistent when repeating the installation across multiple cabinets. At 11/16 inch width, the handle sits with a narrow footprint on the face, which helps when working near panel details or narrow rails where wider hardware might crowd surrounding profiles.

Using The Meadow 256 Mm Pull In Cabinet Runs

Where This Berenson Meadow Pull Fits Best

This Meadow pull belongs to Berenson Corporation decorative handles and pulls, positioning it for use on cabinet doors and drawers where a 10-1/16 inch center to center pattern is planned. The 256 mm spacing aligns well with wider drawer faces in kitchen, bath, or utility cabinetry that follow metric or mixed-dimension layouts. Its 11-11/16 inch overall length allows the pull to span across broad panels, so it can support installation on large base drawers and tall wall doors without appearing undersized. A 1-3/8 inch projection works when mounted on standard door thicknesses, giving room for fingers around the aluminum bar while the door swings or the drawer moves. The 11/16 inch width helps the pull sit cleanly on flat-panel or modestly profiled fronts, where a narrower footprint avoids overlapping into adjacent edge details or shallow frame members.

Why These Meadow Pull Details Support Consistency

The specific 10-1/16 inch (256 mm) center to center dimension on the Meadow pull allows installers to repeat the same drilling template across a full cabinet run, promoting consistent horizontal alignment line by line. Maintaining that exact spread helps when replacing existing hardware drilled to 256 mm, as the new pull can reuse the same mounting points. The long 11-11/16 inch body gives more visual reference during layout, which can simplify squaring the pull with door and drawer edges by eye. A 1-3/8 inch projection keeps the grip comfortably away from the cabinet face, which reduces wear on finished surfaces during frequent use. Because the pull is made from aluminum with a brushed nickel finish, it balances light handling weight with a surface appearance that works alongside other brushed nickel decorative hardware and moldings, aiding in a cohesive job finish.

Common Questions About The Meadow 256 Mm Pull

Selecting This Meadow Pull For Your Layout

The Meadow 256 mm center to center pull from Berenson Corporation ties directly to projects built around a 10-1/16 inch hole spread, giving a straightforward match to that layout. Its 11-11/16 inch length, 1-3/8 inch projection, and 11/16 inch width define how it will sit and feel across cabinet runs. The aluminum construction with brushed nickel finish aligns with decorative hardware and moldings that share similar tones. For cabinet work calling for this specific combination of dimensions and finish, this pull offers a defined option to integrate into doors and drawers across the job.