Festool Domino Sipo tenons are precision-made loose tenons that work with Domino DF 500 Joiners to create strong, repeatable joints, so installers and woodworkers can cut accurate mortises and assemble parts with consistent alignment on repeat runs.
The Domino 50mm x 22mm x 8mm format defines the tenon length, height, and thickness, so you can match your mortise settings on the Domino DF 500 for predictable fit across rails, stiles, and frame members without trial and error during layout.
Sipo Tenons are for exterior applications, which means the material choice supports joinery in outdoor or exposed projects where the joint stock must align with exterior-grade construction methods and design expectations for long-term service conditions.
The Domino tenons belong to the fasteners category under dowels and biscuits, so they function as a structural joinery fastener rather than a surface connector, helping you tie components together inside the material instead of relying on visible mechanical fasteners.
Domino Tenons in a variety of sizes are designed for use with Domino DF 500 Joiners, allowing shops that already use the DF 500 to standardize on one mortising workflow while choosing the tenon size that suits each job, from lighter frames to heavier assemblies.
The product is identified as Festool Domino 50mm x 22mm x 8mm Beech and Sipo Tenon, Pack of 100, tying directly to manufacturer part number 494872, so specifiers and purchasing staff can call out a single reference across drawings, cut lists, and ordering systems.
The Domino 50mm x 22mm x 8mm measurement gives installers a fixed tenon length, so mortise depth on the Domino DF 500 Joiners can be matched precisely, helping align opposing mortises in rails and stiles for accurate shoulder registration.
The 22mm height figure establishes how much joint face is engaged across the grain, which helps designers and builders size parts and choose mortise positions so the tenon sits fully within the section without breaching edges or weakening thin members.
The 8mm thickness dimension ties directly to the cutter size used on Domino DF 500 Joiners, so once the correct cutter is fitted, operators can run a consistent mortise pass knowing the Domino 50mm x 22mm x 8mm tenon will seat without looseness or over-tight spots.
Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners mean this 50mm variant can be reserved for joints where the part dimensions and load justify the length, while shorter or narrower sizes handle lighter components in the same workflow.
Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners fit into everyday work wherever loose-tenon joinery is preferred, so cabinetmakers and installers can handle face frames, table bases, and general furniture assemblies on one system.
The product sits in the Biscuits class under fasteners, meaning it behaves like a flat or shaped insert that bridges two mortised parts, which is valuable in panel and frame construction where hidden strength and alignment are more important than visible hardware.
Sipo Tenons are for exterior applications, so this Domino 50mm x 22mm x 8mm Sipo option is suited to exterior assemblies where the joint is exposed to outdoor conditions, aligning the material selection with the demands of exterior joinery layouts.
Beech tenons are intended for interior applications, which pairs with the Sipo variant in the Domino 50mm x 22mm x 8mm Beech and Sipo Tenon description, letting shops assign beech stock to interior frames and Sipo stock to outdoor components while keeping a consistent joint style.
The classification under Dowels & Biscuits places the Festool Domino 50mm x 22mm x 8mm Beech and Sipo Tenon alongside other alignment and strength components used during assembly, so teams familiar with traditional dowels or biscuits can integrate Domino tenons into similar clamping and gluing processes.
Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners also cover work where multiple joint types appear in a single build, allowing the same DF 500 to switch between shorter and longer joints while keeping this 50mm size ready for medium-span connections.
The Domino 50mm x 22mm x 8mm dimensions define a proportion that balances embedment depth and material removal, so mortises cut with Domino DF 500 Joiners stay within typical rail and stile widths while still offering significant bearing area for glue.
The 22mm height dimension allows the tenon to engage more face grain than narrower sizes, which is important in frames or structural members where increased glue area contributes to joint performance without changing the external appearance of the workpiece.
The 8mm thickness of the tenon coordinates with the intended cutter used by the Domino DF 500 Joiners, creating a controlled interface between mortise and tenon that helps reduce play during dry fitting and assists with alignment when clamping large components.
Sipo Tenons are for exterior applications, so choosing Sipo for outdoor joinery keeps the tenon stock aligned with exterior-use expectations, which matters when building pieces where exposure and long-term service conditions are central to the specification.
Beech tenons are intended for interior applications, so within the Domino 50mm x 22mm x 8mm Beech and Sipo Tenon product, interior pieces can use beech stock matched to indoor environments while retaining the same 50mm format and assembly approach as exterior Sipo joints.
The manufacturer part number 494872 clearly identifies this Domino, SIPO, 8X22X50MM, 100 PACK product, so drafting, estimating, and purchasing tasks can all reference one code, reducing ordering errors and helping standardize joint selection across multiple jobs.
The Festool Domino 494872 tenons measure 50mm x 22mm x 8mm, so mortises cut with Domino DF 500 Joiners can be set to match these dimensions for consistent fit across multiple joints.
These Dominos are for use with Domino DF 500 Joiners, allowing installers to cut matching mortises and use the 50mm x 22mm x 8mm tenons within the DF 500 workflow.
Sipo Tenons are for exterior applications, so they are suited to outdoor or exposed joinery where the tenon material needs to align with exterior-use expectations.
Beech tenons are intended for interior applications, so they fit indoor joinery where the environment matches typical interior service conditions and design requirements.
Domino tenons sit in the Fasteners, Dowels & Biscuits category, acting like a loose tenon that bridges mortised parts rather than a round dowel set into drilled holes.
The Domino 50mm x 22mm x 8mm format specifies length, height, and thickness, guiding mortise depth and cutter selection on Domino DF 500 Joiners for accurate joint sizing.
The Festool Domino 50mm x 22mm x 8mm Beech and Sipo Tenon, identified by part number 494872, ties directly into Domino DF 500 Joiners, so shops using the DF 500 can assign this tenon to medium-length joints that match its dimensions.
Because Sipo Tenons are for exterior applications and Beech tenons are intended for interior applications, this Domino 50mm x 22mm x 8mm option supports both indoor and outdoor projects under one product reference, aligning tenon material and joint size with the job.
Domino Tenons in a variety of sizes for use with Domino DF 500 Joiners position this 50mm variant as a dependable choice in the fasteners, dowels and biscuits category when planning frame, panel, or furniture joinery around a consistent loose-tenon system.
Sold In: 1 Package