Blum LEGRABOX C-Height Front Fixing Bracket Zinc, ZF7C70E2

Zinc Steel Front Fixing Bracket for LEGRABOX C-Height Drawers

This is the Expando front fixing bracket for Blum LEGRABOX drawers built to the C-height specification, finished in Zinc. It attaches the drawer front to the LEGRABOX side profile, carries the system's built-in front adjustment, and is engineered exclusively for this platform and side height.

Key Features

• LEGRABOX C-height compatibility — designed for the C-height side profile at 177mm (7 inch), so the adjusters line up correctly with the installed front.
• Expando mounting format — the Expando bracket expands against the drawer side bore, securing without exposed fastener heads for a cleaner interior finish.
• Steel construction — a formed steel bracket built to withstand the daily load and repeated front adjustments a production drawer demands.
• Zinc finish — a neutral metallic tone that integrates visibly with frameless casework where the interior is seen when the drawer is open.
• Built-in front adjustment — supports the LEGRABOX system's multi-directional front alignment, letting the installer true up gaps after the front is hung without removing it.

What This Bracket Does in the Drawer

The front fixing bracket is the mechanical link between the LEGRABOX steel side profile and the applied drawer front. Without it, the front cannot attach to the system and the adjustment mechanism has no anchor. On a finished job, the bracket sits at the front end of the drawer box, partially concealed by the front panel. Because the Zinc finish is visible when the drawer is open, it matters in installations where the drawer interior is part of the visible design — open-shelf kitchens, handleless frameless cabinetry, and display or workshop storage where drawers are left ajar.

Zinc Finish in Context

Steel drawer hardware traditionally ships in white or cream for painted interiors, but Zinc lands in a different visual register — closer to brushed aluminum than to powder-coated white. That makes it a practical pairing with stainless steel drawer fronts, zinc or chrome hardware, and light-toned metal-finish laminates. It also suits shop and commercial installations where a bare-metal aesthetic reads as intentional rather than unfinished. The steel base under the Zinc finish is the same formed steel used across the LEGRABOX bracket line; the difference is purely visual.

Who Specifies This Bracket

Cabinet shops producing frameless European-style boxes on LEGRABOX runners reach for this bracket when the drawer specification calls for C-height sides and a finish that reads metallic rather than painted. Designers specifying handleless kitchen programs with stainless or zinc-toned fronts often call out this finish to keep the interior hardware consistent. Contractors installing prefabricated LEGRABOX-based cabinetry use it when the box arrives without fronts attached and the interior will be visible in the finished installation. This bracket is a component purchase — it completes a LEGRABOX drawer, it does not start one.

The Right Bracket Keeps the Job Moving

Specifying the correct front fixing bracket by height, finish, and mounting type at the start of the order prevents the most common delay in LEGRABOX installations — arriving on site with brackets that don't align to the side height or don't match the interior finish. The Zinc C-height Expando bracket covers that specification when the job calls for metallic hardware and C-height drawer sides.