Knape and Vogt SCB 8-3/8" Chrome Bottom Mount Waste Pullout with 1-20 Quart Platinum Bin Soft-Close, SCB9-1-20PT
Description
Knape And Vogt Bottom Mount Trash Pullout For Cabinets
Knape and Vogt bottom mount trash pullout SCB9-1-20PT provides a dedicated slide-out waste solution using heavy duty, full extension ball bearing slides. This lets the 20 quart bin travel fully out of the cabinet opening so installers and users gain direct access for bag changes without working around face frames or doors. Soft-Close technology built into the slides slows the return travel so the pull-out closes in a controlled way, which supports quieter cabinet operation in busy kitchen and bath spaces. A single 20 quart platinum bin creates a compact waste station, helpful where space under the sink or in smaller bases is limited. The unit belongs to the KV FYSCB Series Single Trash Pull-Outs with Soft Close, so it aligns with other FYSCB components when planning multi-cabinet layouts across a project.
Key Pull-Out Details That Support Daily Use
- Heavy duty, full extension ball bearing slides with Soft-Close technology allow the waste bin to clear the cabinet opening, giving clear access to the 20 quart bin and reducing interference with door fronts during use.
- 1 inch over-travel in the slide action moves the bin slightly past full extension, which exposes more of the bin rim and makes bag handling and cleanup tasks easier in tight cabinet runs or deeper countertops.
- A specialized wire management system holds bins securely in place, helping the 20 quart bin stay stable on the frame so loads up to the stated capacity are supported more consistently during repeated pull-out and push-in cycles.
- Easy installation with only four screws into heavy-duty mounting straps shortens install time for shop or field crews and creates a straightforward mounting pattern for repeat jobs across multiple cabinets.
- An easy to attach handle simplifies adding the front pull point, so installers can align it to door or drawer aesthetics while keeping the functional hardware tied to the same SCB9-1-20PT assembly.
- The 30 lb maximum per bin weight capacity, not to exceed 80 lb of total weight, defines the working load, so planners can size waste use expectations appropriately for kitchen or bath cabinet locations.
Bottom Mount Pull-Out Setup And Installation Considerations
The SCB9-1-20PT bottom mount trash pull-out fastens to the cabinet using heavy-duty mounting straps and only four screws, so layout work focuses on aligning the frame square to the opening rather than managing multiple bracket locations. Full extension ball bearing slides bring the single 20 quart bin completely forward on the cabinet floor, which helps when working under sinks or in bases with limited vertical clearance. The 1 inch over-travel motion moves the platinum bin slightly beyond the front line, improving hand clearance at the rim. Soft-Close slide action then controls the return travel, allowing the bin to retract smoothly into the cabinet, which supports consistent closing feel across multiple installed units.
Using The SCB9-1-20PT In Cabinet Projects
Where This 20 Quart Pull-Out Works Best
The Knape and Vogt SCB9-1-20PT single 20 quart platinum bin pull-out serves kitchen and bath cabinet applications that need a compact waste location tied directly to the cabinet interior. As part of the KV FYSCB Series Single Trash Pull-Outs with Soft Close, it fits into layouts where designers want matching pull-out behavior and appearance across several cabinets. The bottom mount design positions the assembly on the cabinet floor, which is suited to sink bases or smaller utility cabinets where side mounting would interfere with plumbing or stored items. The 30 lb maximum per bin capacity allows the 20 quart bin to handle typical household or light commercial waste loads while staying within the product limits.
Details That Support Repeatable Installation Results
The SCB9-1-20PT uses heavy duty, full extension ball bearing slides with Soft-Close technology, so installers can expect consistent travel and closing behavior from unit to unit when outfitting multiple cabinets on a project. The 1 inch over-travel feature ensures that, once mounted, the bin extends slightly beyond the face of the cabinet, which simplifies checking clearances during layout and reduces the need for trial adjustments. Only four screws into heavy-duty mounting straps set the base position, creating a repeatable pattern that fits production shop jigs or on-site templates. The specialized wire management system that holds bins securely in place keeps the single 20 quart bin properly seated on the frame, which helps maintain alignment between the bin, handle, and cabinet fronts through repeated use.
Common Questions About This Knape And Vogt Pull-Out
What type of slides does the SCB9-1-20PT use?
The SCB9-1-20PT uses heavy duty, full extension ball bearing slides with Soft-Close technology, which provide complete access to the 20 quart bin and controlled closing inside the cabinet.
How much weight can the 20 quart bin support?
The 20 quart bin in this pull-out has a 30 lb maximum per bin capacity, not to exceed 80 lb of total weight, so waste loads can be planned within these stated limits.
What does the 1 inch over-travel feature provide?
The 1 inch over-travel moves the bin slightly beyond full extension, helping expose more of the bin opening, which simplifies bag handling and access at the front of the cabinet.
How is the SCB9-1-20PT mounted in the cabinet?
The SCB9-1-20PT mounts using heavy-duty mounting straps secured with only four screws, creating a straightforward bottom mount installation on the cabinet floor.
What role does the wire management system play?
The specialized wire management system holds the 20 quart bin securely in place on the frame, which helps keep the bin stable and aligned during repeated pull-out cycles.
What color and size is the waste bin?
The SCB9-1-20PT uses a single 20 quart platinum bin, providing a compact, uniformly finished waste container suited to smaller cabinet spaces.
Selecting This Soft-Close Trash Pull-Out For Your Job
The SCB9-1-20PT Knape and Vogt bottom mount trash pullout combines a single 20 quart platinum bin, heavy duty full extension ball bearing slides, Soft-Close technology, and 1 inch over-travel to support efficient cabinet waste management. The straightforward four-screw mounting into heavy-duty straps and the specialized wire management system provide a consistent setup that aligns with repeatable shop or on-site installation methods. When a compact, soft-close waste pull-out with defined 30 lb bin capacity is required, this KV FYSCB Series Single Trash Pull-Outs with Soft Close option fits directly into cabinet designs focused on organized, accessible waste handling.
