Infinex Aluminum Square Extrusion, 72", Satin Clear

Infinex Aluminum Square Extrusion For Custom LED Runs

Infinex aluminum square extrusion is Tresco Lightings patent-pending LED aluminum extrusion system that forms the housing for custom LED fixtures. This 72 inch satin clear square profile gives installers a defined, linear channel to hold compatible LED components, so runs can be tailored on site instead of relying on fixed fixture lengths.

The 72 inch length can be cut to a desired size, allowing one stock piece to serve multiple cabinet, display, or task-lighting runs. The satin clear finish works with the aluminum construction to present a clean, neutral look that suits a wide range of interior projects, so the extrusion supports both functional lighting and a finished appearance.

As part of the Infinex system from Tresco Lighting, this aluminum square extrusion works within a coordinated family of LED lighting accessories. That system-based design lets installers plan consistent channels, mounting approaches, and power connections across an entire job, using this profile wherever a straight, square-edged run is needed.

Key Infinex Extrusion Details That Help On Site

• The 72 inch length lets installers cut the extrusion to precise sizes for each opening or run, so one part number can cover multiple cabinet or display segments and reduce leftover material.
• The square profile defines a straight, rigid channel for compatible LED components, which supports even alignment along shelves, casework, or work surfaces and helps deliver a consistent light line.
• The satin clear finish provides a neutral aluminum appearance that blends into many interiors, so the extrusion can be used in visible locations without dominating the surrounding design.
• Being part of the Infinex LED aluminum extrusion system by Tresco Lighting means this profile is designed to integrate with matching LED fixtures, so channel shape and sizing are coordinated.
• Use with Tresco 12VDC power supplies ties the extrusion into a low-voltage lighting layout, so runs remain within the same proven power platform across a project.

Surface Mounting And Channel Setup Options

This Infinex aluminum square extrusion is designed for surface mounted installations, so it sits directly on the mounting surface instead of requiring recessing. The profile can be surface mounted using magnets, U-Clips, or screws, giving flexibility in how the channel is secured to cabinets, displays, or other structures.

Magnets slide easily into the channel on the bottom of the light, so installers can use magnetic mounting where they want to avoid visible fasteners on the mounting surface. U-Clips and screw mounting methods provide more traditional mechanical attachment points, so the same square extrusion can adapt to different field conditions or substrate materials while keeping the LED channel consistent.

Using This Infinex Extrusion In Real Projects

Where The Square Extrusion Profile Works Best

The Infinex aluminum square extrusion, 72 inch, satin clear is suited to projects where a straight, defined LED channel is needed along a flat surface. Because it is part of the Infinex LED aluminum extrusion system by Tresco Lighting, it fits into layouts using compatible Tresco fixtures and 12VDC power supplies, so installers can keep a unified platform across undercabinet, shelf, or display lighting runs.

The 72 inch length lets a shop cut multiple shorter pieces from one extrusion for cabinet bays or display cases, or use most of the length for long continuous runs along counters and workstations. The satin clear aluminum appearance works in commercial and residential interiors where hardware is visible, so the extrusion can be positioned in line of sight without clashing with surrounding surfaces.

Using a square profile gives the LED components a right-angled reference, which helps maintain a consistent direction and spacing as the channel is laid out across panels or carcasses. This consistency supports cleaner sight lines in millwork and casework, where uneven channel placement can draw attention away from the overall installation. Because the extrusion is part of Tresco Lightings system of LED lighting accessories, it fits into projects that standardize on that product family.

Mounting Choices That Support Repeatable Layouts

Surface mounting using magnets, U-Clips, or screws gives multiple ways to fasten the Infinex aluminum square extrusion while maintaining the same channel geometry. The ability to slide magnets into the channel on the bottom of the light offers a mounting approach that does not rely on visible fasteners on the facing surface, which can be helpful on finished cabinetry or metal fixtures where a clean look is important.

U-Clips provide discrete attachment points that hold the square extrusion while allowing consistent spacing along the run, supporting repeatable placement across multiple units or bays. Screw mounting uses direct mechanical fastening through compatible points, giving a straightforward way to secure the extrusion on substrates where magnetic mounting is not preferred. Across these options, installers can select the mounting method that aligns with the substrate and design while keeping the same 72 inch satin clear profile in use.

Because Infinex works with all Tresco 12VDC power supplies, the extrusion can be integrated into an existing Tresco low-voltage layout or used as the basis for a new run built around that power platform. The system approach, combined with this square aluminum channel, helps standardize both the electrical side and the physical channel, so projects can scale while retaining familiar components and dimensions from one job to the next.

Practical Questions About This Infinex Extrusion

Selecting This Extrusion For Your LED Layout

The Infinex aluminum square extrusion, 72 inch, satin clear from Tresco Lighting gives installers a cuttable, surface-mounted channel within the Infinex LED aluminum extrusion system. With magnet, U-Clip, and screw mounting options plus compatibility with all Tresco 12VDC power supplies, it supports custom-length LED runs on flat surfaces. For projects built around Tresco fixtures and power components, this square profile offers a consistent, satin clear aluminum channel that can be repeated across cabinets, displays, and work areas.