Edgebanding 8666AA, River Rock .020" Thick x 15/16" Width

Doellken Woodtape Edgebanding For River Rock Panels

Doellken Woodtape edgebanding is PVC edge banding designed for finishing panel edges in woodworking projects where a consistent River Rock tone is required. The 15/16 inch width covers typical panel thicknesses with enough margin to trim flush, which supports clean, straight finished edges on cabinets or casework. The .020 inch thickness provides a slim, workable band that handles well during edgebander or hand-applied runs, helping maintain a consistent profile without adding bulk at the edge. This product is classified as edge banding, so it is intended specifically for edge finishing rather than surface lamination, keeping it focused on sealing and visually completing exposed board edges. The River Rock color is identified as color match Tafisa L538 River Rock Alto - Good, which ties the banding directly to that board design so finished edges visually align with the panel face in typical installations.

Key River Rock Edgebanding Details For Projects

• The .020 inch thickness keeps the edge banding light and flexible, which supports smooth feeding through edgebanders and hand tools while helping reduce the visual step at the finished edge.
• The 15/16 inch width gives coverage beyond standard panel thicknesses, which allows installers to trim back to a precise edge line and maintain a consistent reveal along cabinet and furniture runs.
• The River Rock color match to Tafisa L538 River Rock Alto - Good connects the product to that specific board design, which supports visually coordinated edges on doors, drawer fronts, and case sides built from the same decor.
• The manufacturer part number 8666AA-1520-1 identifies this exact River Rock, .020 inch thick by 15/16 inch wide PVC edge banding, which simplifies specifying, reordering, and matching documentation on shop drawings and cut lists.
• Placement in the edgebanding and surfacing, PVC edgebanding category confirms the material type, which matters when aligning this tape with established PVC edgebanding settings and workflows in the shop.

Edge Banding Size And Color For Straightforward Fit

The 15/16 inch width on this Doellken Woodtape edge banding gives working room beyond common panel thicknesses, which helps installers align the banding during application and then trim back to a clean, even edge. The .020 inch thickness keeps the material lean, which supports tight radius transitions at corners and minimizes the step where the face material meets the edge. The River Rock tone is identified as color match Tafisa L538 River Rock Alto - Good, which ties the banding to that decor so finished cabinet edges track the face color across doors, gables, and shelving. As PVC edgebanding, it fits into established PVC-focused edging setups, allowing shops to treat it consistently with comparable tapes in similar thickness and width.

Using River Rock Edge Banding In Shop Workflow

Where This River Rock Edgeband Is Typically Applied

This edge banding is part of the edgebanding and surfacing, PVC edgebanding category, which positions it for use on exposed panel edges in cabinetry, furniture, and other casework built from engineered boards. The River Rock color tied to Tafisa L538 River Rock Alto - Good makes it suitable wherever that specific Tafisa decor is used, so shop runs of doors, drawer fronts, and carcass parts share a consistent edge tone. With its 15/16 inch width, the banding works along vertical gables, horizontal tops and bottoms, and shelving where installers want a small trimming margin without excessive waste. The .020 inch thickness keeps the tape suited to everyday interior panel work, supporting smooth, low-profile edges on projects built around the River Rock design.

Why These Doellken Details Support Repeatable Results

The defined width of 15/16 inch gives shops a fixed working margin, which supports repeatable trimming and profiling settings when running multiple parts through an edgebander. The .020 inch thickness provides a known material build, allowing edge processing equipment to be set once and used across all parts in the job using this banding. The explicit manufacturer part number 8666AA-1520-1 links the River Rock color and dimensions into one reference, which helps purchasing and production stay aligned so the same tape is used from job to job. Identification as color match Tafisa L538 River Rock Alto - Good gives designers and builders a direct decor reference, which supports predictable visual results when projects rely on that Tafisa surface. Being PVC edge banding places it within familiar processing parameters in the shop, allowing installers to work with known heat and feed expectations associated with PVC materials.

Common Questions About This River Rock Edgeband

Select This River Rock Tape For Matching Edges

This Doellken Woodtape edgebanding pairs a 15/16 inch width with a .020 inch thickness, giving shops a manageable tape size for everyday edge finishing. The River Rock color match to Tafisa L538 River Rock Alto - Good aligns the tape with that decor, helping cabinet and furniture projects keep a unified appearance from face to edge. With the manufacturer part number 8666AA-1520-1 tying together size and color, specifying this PVC edge banding for River Rock-based work keeps purchasing and production on the same page.