Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Swagger brushed nickel pull is a cabinet and drawer handle from the Swagger collection that uses zinc construction, giving you a metal pull suited for everyday cabinet use in kitchens, baths, or shop-built casework where a decorative handle is needed. The pull has a brushed nickel finish that provides a muted metallic look, helping cabinets match other brushed nickel decorative hardware in the project. With a 5-1/16 inch center to center dimension, this pull sets hole spacing for new work or aligns with existing 128 mm boring on replacement jobs. The pull measures 5-1/2 inches in overall length, so it spans slightly beyond the boring, giving a balanced look on doors and drawers. A projection of 1-1/4 inches provides finger clearance from the cabinet face, supporting comfortable gripping during regular use. The 5/8 inch width creates a slim profile that sits cleanly on the cabinet surface while still feeling substantial in the hand.
This Swagger Series cabinet pull uses a 5-1/16 inch center to center dimension that directly determines where mounting holes are drilled on doors or drawer fronts, so layout work aligns around that 128 mm spacing. The specified overall length of 5-1/2 inches helps position the pull so it visually centers over common rail widths on face frame or frameless cabinetry. A projection of 1-1/4 inches sets how far the pull stands off the surface, which influences how much finger room installers and users have when grabbing from different angles. The 5/8 inch width defines the visible band of hardware on the front, shaping how the pull sits against narrow stiles or wider drawer fronts. Thread size 8-32 on the fasteners provides a standard machine thread fit into the pull body, which affects drilling size and torque feel during final tightening on wood cabinet fronts.
This Berenson Swagger Series pull with a 5-1/16 inch center to center layout fits jobs that call for 128 mm boring on cabinet doors or drawers, which is common on many frameless and framed cabinet programs. The 5-1/2 inch overall length suits medium-width drawer fronts and rail sections, giving enough span to feel substantial without looking oversized on typical residential cabinets. Its zinc construction supports use on kitchen, bath, or shop-built storage where a decorative metal handle is specified as part of the hardware package. The brushed nickel finish coordinates with other brushed nickel decorative hardware elements, allowing installers to keep a consistent finish across pulls, handles, and visible components in the space. With a projection of 1-1/4 inches, this pull can be used on doors near adjacent walls or appliances where moderate stand-off helps fingers clear neighboring surfaces during opening.
The defined 5-1/16 inch center to center spacing on this Swagger pull simplifies layout by giving a fixed boring dimension, which supports repeatable drilling on production runs and field installations using jigs set to 128 mm. The 5-1/2 inch overall length provides predictable edge clearances at each end of the pull, helping installers line up hardware visually across multiple doors and drawers for a uniform sightline. A 1-1/4 inch projection establishes a consistent offset across the job, so users experience the same grip feel whether operating wall cabinets, base cabinets, or tall units. The 5/8 inch width keeps the pull slender enough that multiple units installed in close proximity, such as on narrower drawers, appear aligned without crowding the cabinet face. The 8-32 x 1 inch screw size specification allows installers to use a known thread and length standard, which supports consistent driving torque and reduces rework from thread mismatch on the pull body.
The Swagger pull has a 5-1/16 inch center to center, 5-1/2 inch overall length, 1-1/4 inch projection, and 5/8 inch width, so it fits medium-size cabinet doors and drawers with standard 128 mm boring.
The 5-1/16 inch center to center establishes a 128 mm boring pattern, guiding where to drill mounting holes so multiple pulls line up consistently across doors and drawers.
The Berenson Swagger Series pull is made from zinc, giving a metal body suitable for regular cabinet opening and closing in typical residential or shop-built cabinetry.
The 2312-1BPN-P pull uses a brushed nickel finish, which provides a softened metallic look that coordinates with other brushed nickel cabinet hardware and fixtures in the room.
The Swagger pull has a projection of 1-1/4 inches, creating finger clearance between the hand and cabinet front to support a comfortable grip during regular use.
This cabinet pull lists screw size 8-32 x 1 inch, so the threaded connection matches common cabinet hardware machine screw standards during installation.
The Berenson Swagger Series 5-1/16 inch center to center brushed nickel pull combines zinc construction, a defined 128 mm boring pattern, and a 5-1/2 inch overall length to handle everyday cabinet door and drawer operation. Its brushed nickel finish aligns with common decorative hardware choices, helping projects maintain a unified look across hinges, handles, and visible metal components. With a 1-1/4 inch projection and 5/8 inch width, this pull offers finger clearance in a slim profile that suits many residential cabinet styles. For projects calling for a 5-1/16 inch center to center layout, this Swagger pull provides a consistent mounting pattern and finish choice ready for cabinet runs of any size.
Sold In: 1 Each
