Berenson Swagger Series 5-1/16" (128 mm) Center to Center Black Nickel Pull, - 2314-1098-P

Berenson Swagger Black Nickel Pull For Cabinets

Berenson Swagger black nickel pull is a cabinet and drawer handle from the Swagger Collection that gives a consistent look across a project, which helps installers repeat layouts from one opening to the next. This pull is made from zinc in a black nickel finish, so it delivers the specified color and style while using a material that is common in decorative hardware lines. The pull has a center to center dimension of 5-1/16 inches, which sets the drilling pattern for door and drawer fronts and supports straightforward jig or CNC programming. Overall length is 5-1/2 inches, so the handle slightly overhangs the hole spread for better finger clearance on typical cabinet faces. A projection of 1-1/4 inches creates stand-off from the surface, giving room for a solid grip without crowding adjacent fronts in most standard cabinet layouts.

Key Swagger Pull Details For Trade Use

• The 5-1/16 inch (128 mm) center to center size defines the hole spacing, which helps installers align this pull with common metric and inch-based drilling patterns on cabinet doors and drawers.
• The overall 5-1/2 inch length provides visible coverage beyond the fastener points, which supports a balanced look on mid-size drawer fronts and typical kitchen or bath cabinet doors.
• The 1-1/4 inch projection sets how far the pull stands off the surface, which influences finger clearance and reduces knuckle contact during everyday cabinet and drawer use.
• The 5/8 inch width gives the gripping area its visual weight, which helps the handle read correctly on face frames or slab fronts without overpowering smaller cabinet sections.
• The black nickel finish establishes a dark, reflective appearance, which allows the pull to coordinate with other black nickel decorative hardware used in the same room or project.
• The zinc material forms the base of the pull, which supports precise shaping of the Swagger profile while staying consistent with other zinc-based decorative cabinet hardware.

Mounting Dimensions For Swagger 128mm Pull

This Swagger Series pull has a center to center measurement of 5-1/16 inches, so hole drilling follows that exact spacing when laying out new cabinet fronts or reworking existing ones. The 5-1/2 inch overall length means the ends extend slightly past the mounting points, which keeps the handle proportional on many standard drawer widths and door rails. With a projection of 1-1/4 inches, the handle stands off the face enough for a firm handhold, which matters when drawers carry weight or doors use stronger hinges. A width of 5/8 inch defines the thickness across the grip area, giving a defined edge without adding unnecessary bulk to the front elevation.

How Swagger Series Pull Performs In Use

Where The Swagger 2314-1098-P Pull Fits Best

This Berenson Swagger Series pull belongs to the handles and pulls category for decorative hardware and moldings, placing it directly in cabinet and drawer applications. The 5-1/16 inch center to center dimension positions it in the common mid-size range, so it works well on many kitchen, bath, or built-in cabinet fronts that are drilled to that spread. Because the pull length is 5-1/2 inches, it visually anchors medium-width drawers and doors, helping maintain consistent sightlines when used across a bank of fronts. The black nickel finish ties into projects that specify dark metallic tones, allowing the pull to align with other black nickel elements selected from the same finish family. As a zinc pull, it matches other zinc-based decorative pieces in a hardware schedule, which is helpful when multiple handle styles from Berenson Corporation are combined on one job.

Details That Support Repeatable Mounting Results

The precise 5-1/16 inch (128 mm) center to center dimension gives installers a reliable drilling target, which simplifies use of boring jigs or CNC programs across multiple doors and drawers. Because that measurement is fixed, layouts can be mirrored from left to right or repeated vertically on tall pantry fronts without re-measuring each location. The 1-1/4 inch projection sets a consistent stand-off depth, so finger clearance remains the same from cabinet to cabinet, contributing to uniform user feel across the installation. The 5/8 inch width of the grip offers a defined surface for the hand, which supports comfortable operation on heavier drawers that may be fitted with full-extension slides. With a total length of 5-1/2 inches, the handle spans enough of the front rail to give users multiple grasp points, which can improve control when opening wider drawers in everyday use.

Common Questions About Swagger Black Nickel Pull

Selecting This Swagger Pull For Your Project

The Berenson Swagger Series 2314-1098-P pull combines a 5-1/16 inch center to center drilling pattern, 5-1/2 inch overall length, and 1-1/4 inch projection, giving clear dimensions for planning cabinet layouts. With zinc construction and a black nickel finish, it matches projects calling for dark decorative hardware. For installers and shops building consistent cabinet runs, these fixed measurements and finish details support repeatable results from one job to the next.