Berenson Swagger Series 12-5/8" (320 mm) Center to Center Polished Chrome Pull, - 2322-1026-P

Berenson Swagger Pull 320mm Center To Center

Berenson Swagger pull 320mm center to center is a zinc handle in the Swagger collection with a polished chrome finish, so it delivers a consistent modern look across cabinets where that specific style and size are required. The 12-5/8 inch center to center dimension positions mounting holes at a standard spread for wider cabinet doors and drawers, which helps keep drilling layouts repeatable from one front to the next. Its 13-1/16 inch length gives the pull a long grip area, so hands find it easily on tall doors or broad drawer faces. A 1-1/4 inch projection stands the handle off the front, which creates finger clearance for a comfortable grasp during daily use. The 5/8 inch width provides a slim visual profile, which keeps the hardware from overwhelming door and drawer proportions while still being easy to grab.

Key Swagger Series Pull Details For Projects

• The Swagger collection designation ties this pull to a defined Berenson Corporation series, so matching additional handles from the same line on multi-room jobs stays straightforward and visually consistent.
• Zinc material construction provides a solid cabinet pull body, which supports everyday door and drawer operation in typical woodworking and cabinet environments.
• The polished chrome finish gives the pull a bright, reflective surface, which coordinates with other polished chrome decorative hardware on cabinets for a unified appearance.
• The 12-5/8 inch center to center measurement matches the 320 mm center to center spec, which lets layouts work in either imperial or metric shop setups without recalculating hole spacing.
• The 13-1/16 inch overall length establishes the pull footprint on the front, which helps with planning margins from door edges and neighboring hardware on larger cabinetry.
• The 1-1/4 inch projection sets the standoff from the face, which supports knuckle clearance and reduces contact between fingers and the cabinet surface during operation.

Mounting Dimensions And Fit For This Pull

This Swagger Series pull uses a 12-5/8 inch center to center mounting dimension, so hole locations align directly with that spread when laying out new fronts or aligning with existing bores. The 320 mm center to center value expresses the same spacing in metric, which helps shops that work from metric drawings or jigs keep alignment accurate. With a 13-1/16 inch overall length, the ends of the pull extend slightly beyond the mounting centers, which affects how far the handle reaches across rail and stile layouts. A 5/8 inch width defines the grip bar thickness on the face, which plays into both hand feel and how the hardware lines up visually with door and drawer proportions.

Where This Swagger Cabinet Pull Works Best

Using The Swagger Series Pull On Cabinets

The Swagger collection identity connects this pull to other Berenson Corporation decorative hardware, which helps keep style and finish aligned when outfitting banks of cabinets or coordinated spaces. Its polished chrome finish pairs with polished chrome hinges and other visible hardware, so face frames and frameless cabinets present a unified metal tone. The 12-5/8 inch center to center size suits wider drawers and doors, where a longer handle balances the front and provides a broad grip area for opening. With a 13-1/16 inch overall length, the pull reaches across a noticeable portion of the front, which can visually tie together tall pantry doors or deep base drawers. The 1-1/4 inch projection creates a consistent stand-off across all mounted locations, which keeps hand clearance predictable at different cabinet heights.

Details That Support Repeatable Layouts And Results

The clearly stated 12-5/8 inch center to center dimension, paired with the 320 mm metric equivalent, allows jigs and drilling templates to be set once and reused, which helps keep row-to-row spacing uniform on multiple fronts. Zinc construction provides a defined material for the pull body, which informs how it behaves when torqued during tightening or when doors and drawers are pulled repeatedly over time. The 5/8 inch width offers a consistent grip thickness, which helps installers align multiple pulls along rails or drawer banks so sightlines stay straight. A polished chrome finish presents a smooth, reflective surface, which can be wiped down as part of normal cabinet cleaning without disrupting the appearance of the hardware. The combination of 13-1/16 inch length and 1-1/4 inch projection defines a stable three-dimensional footprint on the door or drawer face, which supports predictable clearances relative to adjacent fronts and nearby hardware.

Common Questions About The Swagger Series Pull

Selecting This Pull For Cabinet Projects

The Berenson Swagger pull 320mm center to center combines a 12-5/8 inch mounting spread, 13-1/16 inch length, and 1-1/4 inch projection, so it fits wider drawers and doors that benefit from a longer handle. Zinc construction with a polished chrome finish gives the pull a defined material and appearance, which suits cabinetry planned around polished chrome decorative hardware. With its 5/8 inch width and Swagger collection styling, this pull supports coordinated layouts across kitchens, baths, and other cabinet installations where consistent sizing and finish matter.