Berenson Swagger Series 12-5/8" (320 mm) Center to Center Black Nickel Pull, - 2323-1098-P

Berenson Swagger 320mm Pull For Cabinet Projects

Berenson Swagger 320mm pull is a zinc cabinet handle in a black nickel finish designed for decorative hardware projects where a longer pull is needed. The 12-5/8 inch (320 mm) center to center dimension spaces the mounting holes for wider doors and drawers, which helps align with larger fronts or multiple-panel layouts. The overall 13-1/16 inch length gives a substantial hand grip area, which supports comfortable operation on tall cabinet doors. A 1-1/4 inch projection sets the handle off the surface, providing finger clearance when opening heavier fronts. The 5/8 inch width creates a slim profile across the face while still presenting a defined pull line for consistent alignment along a run of cabinets. The black nickel finish delivers a dark metallic look that coordinates with modern and transitional cabinet styles.

Key Swagger Black Nickel Cabinet Pull Details

• The 12-5/8 inch (320 mm) center to center drilling matches standard long-pull layouts, which simplifies planning hole locations on wide drawers or pantry doors.
• The 13-1/16 inch overall length extends past the mounting points, which provides additional gripping span that suits larger cabinet fronts or appliances panels.
• The 1-1/4 inch projection sets the pull away from the door face, which creates space for fingers and reduces knuckle contact against the cabinet surface during use.
• The 5/8 inch width keeps the pull visually slim, which helps maintain clean sight lines on contemporary cabinetry while still giving a clear edge to grab.
• The zinc material construction provides a solid-feeling handle body, which supports consistent performance in typical residential woodworking and cabinet environments.
• The black nickel finish gives a dark, reflective metal appearance, which helps tie together other black or nickel decorative hardware in the same space.

Mounting The 12-5/8 Inch Center To Center Pull

This Swagger black nickel cabinet pull uses a 12-5/8 inch (320 mm) center to center layout, which sets the spacing between the two mounting points for drilling and installation. Matching this dimension to the template or layout line allows the pull to sit straight across the cabinet face. The pull projects 1-1/4 inch from the mounting surface, which positions the gripping area away from raised panels or profiled edges. With a body width of 5/8 inch, the mounting footprint stays narrow, which is useful when positioning the pull on slim rails or narrow drawer faces while still covering the drilled holes cleanly.

Using This Swagger Black Nickel Cabinet Handle

Where This Berenson Swagger Handle Works Best

This Berenson Swagger handle is part of the Swagger collection, which allows consistent styling across multiple doors and drawers using the same design language. The 320 mm center to center sizing aligns well with wider base cabinets, tall pantry doors, and broad drawer fronts where a smaller pull would look undersized. The 13-1/16 inch overall length spans a larger portion of the cabinet front, which visually balances broader faces and helps distribute the pulling force along the door edge. The black nickel finish coordinates with other black nickel decorative hardware and moldings, which supports cohesive hardware selection across a kitchen, bath, or built-in project from the same source. In woodworking shops, this dimension and finish combination suits projects aiming for a contemporary or transitional appearance using elongated pulls.

Details That Support Repeatable Cabinet Installations

The defined 12-5/8 inch (320 mm) center to center measurement lets installers standardize drilling patterns, which speeds production runs when multiple fronts use the same Berenson Swagger 320mm pull. Using the 1-1/4 inch projection as a reference helps maintain consistent clearance, which benefits layouts where doors swing past adjacent cabinets or counters. The 5/8 inch width gives a predictable contact line along the cabinet face, which makes it simpler to align several pulls in a straight visual row. Because the pull body is zinc with a black nickel finish, the surface and feel remain consistent from piece to piece, which supports uniform results across large installations. The manufacturer part number 2323-1098-P clearly identifies this exact size and finish combination, which helps match reorders or replacements to existing Swagger installations without mix-ups.

Common Questions About This Swagger 320mm Pull

Select This Pull For Consistent Long-Handle Layouts

The Berenson Swagger 320mm pull from Wurth Baer Supply combines a 12-5/8 inch center to center layout, 13-1/16 inch length, and black nickel finish to support long-handle cabinet designs. For projects using wider doors, tall pantry fronts, or extended drawers, this zinc pull gives a repeatable drilling pattern and comfortable 1-1/4 inch projection. The 5/8 inch width and Swagger collection styling help align multiple fronts with a unified look. Use this exact 2323-1098-P part number when specifying or reordering the same long black nickel handle across a run of cabinetry.