Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vested Interest pull 160mm center to center identifies this Berenson Vested Interest Series cabinet pull as a 6-5/16 inch center to center handle designed for standard cabinet hole spacing, so it fits common layouts in kitchens, baths, and built-ins. The pull is made from zinc, which provides a sturdy metal body that handles repeated daily use on doors and drawers. Its Verona Bronze finish gives a bronze-toned appearance, helping match other Verona Bronze hardware across a project for a consistent look. The overall length of 7-1/4 inches gives ample grip surface across the front of the cabinet, which helps when opening heavier drawers. A projection of 1-1/2 inches from the mounting surface creates space behind the pull for fingers, supporting comfortable operation. The width of 11/16 inch keeps the profile visually balanced while still feeling substantial in the hand.
This Berenson Vested Interest Series pull uses a 6-5/16 inch (160 mm) center to center mounting pattern, so it lines up with standard 160 mm boring on many cabinet lines. The pull is described with a screw size of 8-32 x 1 inch, which indicates the thread and nominal length used to fasten the pull through the cabinet front. With a projection of 1-1/2 inches from the door or drawer face, the handle creates a clear gap for fingers behind the bar, which is useful on thicker fronts. The 7-1/4 inch overall length and 11/16 inch width define the footprint of the pull on the surface, helping lay out spacing between adjacent handles on banks of drawers or multiple doors.
The Berenson Vested Interest Series 6-5/16 inch center to center Verona Bronze pull is positioned for cabinet doors and drawers that use a 160 mm mounting span, which is common in frameless and face-frame construction. Its Verona Bronze finish ties into projects that already use Verona Bronze decorative hardware, allowing the pull to blend into a coordinated hardware schedule. The zinc construction suits high-touch locations like kitchen base cabinets, wall cabinets, and vanity drawers, where a solid metal handle supports frequent opening and closing. With a 7-1/4 inch overall length, this pull also fits well on medium to wider drawer fronts, giving enough bar length to grasp from different angles. The 1-1/2 inch projection can be valuable on doors near tall face frames or thicker applied fronts, because the stand-off distance keeps fingers clear of adjacent surfaces.
The 6-5/16 inch (160 mm) center to center measurement aligns with a widely used drilling pattern, so installers can base layouts on a known span when boring new fronts or matching existing 160 mm holes. Using the specified 8-32 x 1 inch screw size sets the fastening interface through the cabinet material, which matters when working with standard front thicknesses that accommodate this thread and length. The 7-1/4 inch overall length relative to the 160 mm mounting span leaves modest overhang at each end, helping the pull sit proportionally on both narrow and moderate-width fronts without looking undersized. A projection of 1-1/2 inches defines the working clearance between the bar and the cabinet face, which supports comfortable gripping even when hands approach from the side. The 11/16 inch width influences both the tactile feel along the front edge and the visual weight on painted or stained surfaces, which helps maintain a balanced appearance across a run of cabinets.
The pull has a 6-5/16 inch (160 mm) center to center measurement, so it matches cabinet fronts bored on a 160 mm span for straightforward mounting or replacement.
The pull length is 7-1/4 inches, with a projection of 1-1/2 inches and a width of 11/16 inch, which defines how much space it occupies and how far it stands off the cabinet face.
The pull is made from zinc, giving it a solid metal body that supports repeated daily use on doors and drawers in typical cabinet installations.
The pull has a Verona Bronze finish, allowing it to align visually with other Verona Bronze decorative hardware used across the same room or project.
The pull is specified with 8-32 x 1 inch screws, indicating the machine screw thread and length used to fasten the pull through standard cabinet front thicknesses.
The manufacturer part number is 2332-10VB-P, which identifies this specific Berenson Vested Interest Series Verona Bronze pull for ordering and project documentation.
The Berenson Vested Interest Series 6-5/16 inch (160 mm) center to center Verona Bronze pull combines a zinc construction, Verona Bronze finish, and defined dimensions into a cabinet handle suited to standard 160 mm layouts. At Wurth Baer Supply, this pull can match projects that call for a 7-1/4 inch overall length, 1-1/2 inch projection, and 11/16 inch width. When a job specifies the 2332-10VB-P part or a Verona Bronze finish on 160 mm centers, this model aligns directly with that requirement and supports consistent hardware planning across the installation.
