Vested Interest Pull 224mm Center To Center Use

Vested Interest pull 224mm center to center describes a Berenson Vested Interest Series cabinet pull designed around an 8-13/16 inch mounting spread, giving installers a clear match for pre-drilled cabinet or drawer hole spacing. The pull is made from zinc, which provides a stable, work-friendly material that handles normal cabinet use while keeping weight manageable during installation. Its brushed nickel finish offers a muted metallic look that pairs with many modern and transitional cabinet styles, helping projects stay visually consistent across a run of doors and drawers. The pull measures 9-3/4 inches in overall length, so it covers a generous area on wider drawer fronts and larger doors, supporting confident hand placement. A projection of 1-3/8 inches creates hand clearance from the cabinet face, which helps users get a solid grip without contacting the door surface during everyday operation.

Key Vested Interest Pull Details For Projects

• The 8-13/16 inch (224 mm) center to center dimension aligns drilled holes precisely, reducing layout time when replacing hardware or drilling new fronts on cabinet runs.
• The 9-3/4 inch overall length gives this pull a substantial span across doors and drawers, which helps balance wider fronts and creates consistent visual lines on banks of cabinetry.
• The 1-3/8 inch projection provides a defined gap from the cabinet face, improving finger clearance so users can grab and operate doors and drawers without rubbing knuckles on adjacent surfaces.
• The 3/4 inch width creates a comfortable gripping surface along the pull bar, supporting a secure handhold during repeated daily use on frequently accessed cabinets.
• The brushed nickel finish delivers a soft metallic appearance that coordinates with many brushed faucets and hinges, helping designers carry a unified look through kitchens and other built-ins.
• The zinc material construction gives the pull a solid feel in hand while keeping weight moderate, which is useful when mounting on standard cabinet door and drawer materials.

Installation Dimensions For Accurate Berenson Pull Fit

This Berenson Vested Interest Series pull is specified with an 8-13/16 inch center to center measurement, so installers can align it directly to existing 224 mm hole patterns on cabinet doors and drawers. The 9-3/4 inch overall length helps when laying out hardware spacing, since it defines the visual footprint on the face of the cabinet component. With a 1-3/8 inch projection from the mounting surface, the pull stands off the cabinet far enough to allow fingers to wrap behind the bar, which supports a confident grip in daily use. The 3/4 inch width further defines the contact area, so tradespeople can visualize how the pull will feel and look across different cabinet sizes.

Using This 2333-1BPN-P Pull In Cabinet Work

Where The Vested Interest Pull Works Best

The Berenson Vested Interest Series 2333-1BPN-P pull fits cabinet and drawer layouts that are drilled for 224 mm, or 8-13/16 inch, center to center spacing, which is common on wider fronts in kitchens and built-in storage. Its 9-3/4 inch overall length suits full-size cabinet doors, tall pantry fronts, and larger drawer faces, where a longer pull helps distribute visual weight across the panel. The 1-3/8 inch projection and 3/4 inch width combine to create a hand-friendly profile, which is useful on frequently used drawers near work areas. With a brushed nickel finish over zinc, the pull supports projects that call for a brushed metallic look on decorative hardware and moldings, helping unify appearance with other brushed nickel components in the same space.

Details That Support Repeatable Cabinet Results

The defined 224 mm center to center dimension lets installers repeat hole patterns across multiple doors and drawers, improving consistency when laying out a full bank of cabinets. Because the pull length is precisely 9-3/4 inches, designers can plan clearances between adjacent fronts, knowing how much of each panel will be covered by hardware. The 1-3/8 inch projection gives predictable clearance from the cabinet surface, so alignment with neighboring pulls stays visually even along a run. A 3/4 inch width means the bar has a measurable gripping area, helping tradespeople anticipate how it will feel for end users pulling heavier drawers. The combination of zinc construction and a brushed nickel finish identifies the pull as part of a decorative hardware solution that ties into the Berenson Vested Interest Series, aiding in consistent hardware selection across a project.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For 224mm Cabinet Layouts

The Berenson Vested Interest Series 2333-1BPN-P pull combines a 224 mm (8-13/16 inch) center to center layout, 9-3/4 inch overall length, and 1-3/8 inch projection to support cabinet projects that call for longer brushed nickel hardware. When a design or replacement job specifies this spacing and look, this zinc pull with a brushed nickel finish offers a defined set of dimensions for consistent drilling, alignment, and visual balance across doors and drawers. For projects built around 224 mm hole patterns and a brushed metallic appearance, this handle provides a clear, measurable fit choice.