Salice Series CU 3 Cam Soft-Close Silentia 5/8" Overlay Face-Frame Hinges Nickel, 106° Dowel - CUR35D9R

Salice Series CU Silentia Hinge For 5/8 Overlay

Salice Series CU Silentia hinge is a concealed face-frame cabinet hinge designed for 5/8 inch overlay doors, so it lets you keep a clean exterior line while controlling clearances on framed cabinets. This hinge is part of the Salice Series CU range, which is built as a concealed cabinet hinge for face-frame applications, giving you a consistent format across similar jobs. The hinge uses an integrated soft closing mechanism, so the door decelerates at the hinge itself and avoids hard slamming on the frame. That same soft-close mechanism can be deactivated with the clearly visible activation switch on the front of the unit, which lets you set the closing behavior per door based on cabinet size or customer preference. The hinge has a 106 degree opening angle, providing generous access into the cabinet while still controlling swing in tighter runs.

Key Salice CUR35D9R Features For Cabinet Work

• This 5/8 inch overlay design manages the door position on a face frame, which helps align reveals when you are running multiple doors on the same cabinet or across a bank.
• The 106 degree opening angle gives enough door travel for interior access while helping to avoid doors colliding with adjacent cabinets or walls in many framed layouts.
• An integrated soft close mechanism in the hinge arm slows the door, which reduces impact at closing and supports a more controlled feel on everyday use.
• The soft close function can be deactivated with a front-facing activation switch, so you can fine-tune closing strength or turn it off on lighter or smaller doors as needed.
• A 3 cam adjustment system on the hinge provides multi-axis fine tuning at the hinge, which helps dial in gaps, reveals, and alignment after doors are hung.
• The hinge is described as having a dowel configuration, so it is suited to dowel-style mounting preparation where that boring pattern is part of your door machining process.

Mounting And Adjustment Details For Installers

This concealed face-frame hinge has an 11 mm, or 7/16 inch, cup depth, so the door boring must match that depth to seat the hinge correctly in the cup. The stated possible drilling distance on the door is from 2.5 mm to 6.0 mm, equivalent to 3/32 inch to 1/4 inch, which defines how close the cup hole is set from the door edge and directly affects overlay and fit on the frame. The hinge is identified as a dowel version, so it is intended for a door bore that accepts hinge dowels rather than alternative fixing formats. A nickel plated steel finish is specified, which provides a hard-wearing metal surface on the hinge parts that will be exposed to normal cabinet interior conditions.

Using This 3 Cam Soft Close Hinge In Projects

Face Frame Concealed Hinge For 5/8 Overlay Doors

This hinge is defined as a 5/8 inch overlay face-frame hinge, so it is intended for framed cabinet construction where the door overlays the face frame by 5/8 inch. As a concealed cabinet hinge, it sits hidden when the door is closed, which supports a clean, hardware-free exterior on finished installations while still providing accessible adjustment on the inside. The 106 degree opening angle allows doors to open widely for access to shelves and pullouts, so interior hardware and storage are easier to reach during everyday use. With an 11 mm, or 7/16 inch, cup depth across the line, the same boring depth applies to all hinges in this CU Silentia series, so door machining can stay consistent from cabinet to cabinet. The dowel configuration ties this hinge to machining that uses dowel bores for mounting, which fits well into production settings set up around that style of hinge installation.

3 Cam Adjustment And Soft Close Control For Fine Tuning

The hinge is described as a 3 cam adjustment hinge, providing three independent cam points that allow you to fine tune door position once the hinge is mounted. That cam-based adjustment structure gives you the ability to correct small shifts in height, side-to-side position, or in-and-out relationship, supporting tight reveals and even lines across multiple doors. The integrated soft closing mechanism operates directly at the hinge, decelerating the door through the closing arc so the door lands smoothly on the frame. Because the mechanism can be deactivated with an activation switch clearly visible on the front of the unit, you can tailor the closing action on specific doors without changing the hinge. This adjustability helps when different door sizes or weights on the same run need different closing behavior while still using the same hinge model. The nickel plated steel construction brings a robust metal surface to the moving parts, which supports consistent hinge function over repeated use in typical cabinet environments.

Common Questions About The Salice CUR35D9R Hinge

Selecting This Soft Close Hinge For Your Cabinets

This Salice Series CU Silentia hinge pairs a 5/8 inch overlay face-frame design with an integrated, switchable soft close, so it supports controlled closing on framed cabinets. The 3 cam adjustment and defined drilling distances give you clear parameters for precise door alignment. With a 106 degree opening angle and 11 mm cup depth consistent across the line, this hinge fits into repeatable door machining and installation workflows. For projects that call for concealed, soft-closing face-frame hinges with adjustable behavior, this model offers a clearly defined set of working details.