Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Rev-A-Shelf wall filler pull-out gives narrow wall cabinet spaces a usable storage area with a fully assembled maple organizer. The Rev-A-Shelf 432 Series wall filler is a wall cabinet organizer filler designed in a 3 inch width and 33 inch height for tight spaces that are often left unused. This 432-WF33-3C unit includes four adjustable wood shelves with chrome rails to help keep stored items in place. One top and two bottom pre mounted full extension ball bearing slides support smooth access to the shelves. Product data for the 432 Series states a 100 lb load rating for the slide setup. For buyers planning wall cabinet fillers in kitchens or baths, this format helps bring stored items forward instead of burying them behind fixed filler panels.
Key specs to confirm: This Rev-A-Shelf wall cabinet organizer filler is the 432-WF33-3C, a maple wall cabinet filler sized at 3 inches wide by 33 inches high. Product data states that this fully assembled unit includes four adjustable wood shelves with chrome rails and uses one top and two bottom pre mounted full extension ball bearing slides. The slide arrangement is listed with a 100 lb load rating. Before purchase, confirm your actual wall cabinet filler opening, interior clearance, mounting space, and whether the cabinet layout allows the pull-out to extend fully. If any additional dimensional, installation, or compliance details are needed, they should be confirmed with the manufacturer or technical documentation.
What's included: One Rev-A-Shelf 432 Series wall filler pull-out sold as each, fully assembled, with four adjustable wood shelves, chrome rails, and the pre mounted slide hardware described in the product data.
What to verify before ordering: Check opening width, cabinet height, inside depth, door and trim clearance, nearby hardware interference, and whether your application needs a 3 inch or 6 inch design. Also confirm that the 33 inch height matches the cabinet section where the filler will be installed.
Many wall cabinet layouts leave a slim gap beside a cabinet run, refrigerator surround, or other fixed construction detail. In those spots, a standard shelf or tray often will not fit, and a fixed filler strip does not provide storage. A maple wall cabinet filler like this Rev-A-Shelf unit is built for that narrow area. Instead of wasting the opening, the pull-out format brings stored items forward on full extension ball bearing slides.
For a kitchen installer, this can be useful when a design includes a narrow wall cabinet filler opening that still needs to hold small pantry items, wraps, spices, or other compact goods. For a remodel buyer, the value is simple access. The 3 inch wall filler pull-out uses four adjustable wood shelves, so shelf spacing can be changed to better fit what the homeowner plans to store. Chrome rails on the shelves add containment, which is helpful when the organizer slides out from a tall, slim opening.
The 432 Series wall filler arrives fully assembled, which can help reduce assembly time during installation. Product data also states that the slide setup includes one top and two bottom pre mounted full extension ball bearing slides with a 100 lb load rating. That gives buyers a verified reference for storage planning, but the actual cabinet opening and mounting conditions still need to be checked. Buyers should confirm inside cabinet dimensions, face frame or frameless conditions, and any nearby trim or door swing that could limit travel. If exact depth, mounting instructions, or handed installation details are needed, those points should be verified in current manufacturer documentation before ordering.
When comparing wall cabinet fillers, buyers usually look at three things first: whether the unit fits the opening, whether it arrives ready to install, and whether the shelf layout matches the intended storage use. This Rev-A-Shelf wall cabinet organizer filler gives clear verified details in those areas. It is identified as a 3 inch wide by 33 inch high wall filler pull-out, it comes fully assembled, and it includes four adjustable wood shelves with chrome rails.
Another key comparison point is slide access. Some filler organizers may not provide the same reach to the back of the storage area. The product data for this 432 Series wall filler states full extension ball bearing slides, which helps buyers understand that the shelves are designed to come forward for access. The listed one top and two bottom slide arrangement also gives a concrete hardware description that can be useful during planning.
Material and format also matter. This unit uses maple shelves rather than a wire-only layout, which may suit buyers who want a wood interior look in a cabinet project. Because it is part of the Rev-A-Shelf 432 Series line of wall cabinet fillers, buyers who are matching other sizes in the same family can also note that the series is available in both 3 inch and 6 inch wide designs and in several heights. For this exact model, though, the fit decision should stay focused on the verified dimensions, included shelf count, and the clearances required in the intended wall cabinet location.
The Rev-A-Shelf wall filler pull-out is made for a 3 inch wide, 33 inch high wall cabinet filler application. Confirm the actual opening and clearances before ordering.
The Rev-A-Shelf 432-WF33-3C includes four adjustable wood shelves with chrome rails.
The Rev-A-Shelf 432 Series wall filler is listed as fully assembled, which can reduce setup time at installation.
The Rev-A-Shelf wall cabinet filler uses one top and two bottom pre mounted full extension ball bearing slides.
The Rev-A-Shelf 432 Series product data lists a 100 lb load rating for the slide setup.
This wall cabinet organizer filler should be matched to the opening size, interior clearance, and mounting conditions. Follow manufacturer installation guidance and local building requirements where applicable.
The Rev-A-Shelf 432-WF33-3C is described as a wall filler pull-out, so buyers should confirm they are ordering for a wall cabinet application.
The shelves in this maple wall cabinet filler are adjustable, which helps with storing items of different heights.
The 3 inch wall filler pull-out should be checked for opening width, cabinet height, interior depth, and door or trim clearance for full slide travel.
3 inch wall filler pull-out is a practical way to use a narrow wall cabinet gap when the opening matches the product size and installation needs. This Rev-A-Shelf 432 Series unit is sold as each, comes fully assembled, and includes four adjustable wood shelves with chrome rails on a maple organizer frame. Before purchase, confirm your 3 inch width, 33 inch height, inside cabinet clearance, and full extension travel space. If your project needs another width or height in the series, verify the exact model before ordering.
Sold In: 1 Each
