Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf wood pullout shelf gives a vanity cabinet organizer a more controlled way to store grooming tools and bath items inside a base cabinet. This Rev-A-Shelf 445 Series organizer is a wood pullout shelf with soft-close full extension slides, adjustable shelves, and adjustable door mount brackets. The unit ships fully assembled, which helps reduce setup time at the jobsite. The rev a shelf design also uses patented tri-slides to limit side-to-side motion and support a steady pullout action. For bath cabinet organizer projects where access matters, the 8-7/16 inch width, 19-5/8 inch depth, and 25-3/4 inch height should be checked against the cabinet opening before ordering.
Key specs to confirm: This vanity cabinet organizer is listed at 8-7/16 inches wide, 19-5/8 inches deep, and 25-3/4 inches high. Buyers should confirm clear cabinet opening width, interior cabinet depth, available height, and door attachment space before ordering. Because this is a door-mounted pullout, also verify face frame conditions and whether the cabinet uses a 1-1/2 inch or 1-3/4 inch face frame where the supplied rub bushings may apply. If load capacity, safety details, compliance information, or any heat-related guidance for stored tools is needed, those details should be confirmed with the manufacturer or technical documentation.
What's included: The Rev-A-Shelf 445 Series wood pullout shelf is fully assembled and includes adjustable shelves, adjustable door mount brackets, a micro-adjustment screw, patented tri-slides, rub bushings for 1-1/2 inch or 1-3/4 inch face frames, and two stainless steel bins designed for hair dryers and curling irons.
What to verify before ordering: Confirm your cabinet opening, inside depth, inside height, door style, face frame size, and mounting clearance. Check that the pullout dimensions match the cabinet and that the door mount flexibility fits your layout. Follow manufacturer installation guidance and local building requirements where applicable.
A vanity cabinet organizer like this one is useful when a standard sink base or bath cabinet leaves grooming tools hard to reach or stacked behind other items. In many bathrooms, hair dryers, curling irons, brushes, and bottles end up on the cabinet floor or in mixed bins that waste vertical space. The Rev-A-Shelf 445 Series addresses that issue with a wood pullout shelf format that brings stored items out of the cabinet instead of forcing the user to reach deep inside.
For a professional installer, the fully assembled design can simplify the job. There is less field assembly to manage, and the adjustable door mount brackets with a micro-adjustment screw give a more precise way to align the cabinet door after the pullout is in place. That matters when the reveal must look clean and the pullout has to track well during repeated use. The patented tri-slides are also relevant in daily use because Rev-A-Shelf states they prevent side-to-side motion and provide complete stability when pulled out of the cabinet.
For a homeowner or remodel buyer comparing a revashelf organizer to a fixed shelf, the practical gain is access. Soft-close full extension slides allow the unit to move out far enough to see and reach stored items more easily. Adjustable shelves support changes in storage needs over time, which is useful if the cabinet alternates between personal care items and tool storage. The two stainless steel bins designed for hair dryers and curling irons make this model particularly suited to grooming setups.
Model-specific searches such as RS445-VCG25SC-8, RS445-VCG25-8, and RS445-VCG20SC-8 often indicate buyers are checking width, height, or series differences before purchase. When comparing those references, confirm the exact dimensions and included components for the model you need rather than assuming all nearby numbers share the same size or accessories.
When buyers compare this product type in general, the main differences usually come down to assembly level, slide action, door mounting flexibility, and how stable the pullout feels under normal use. This Rev-A-Shelf wood pullout shelf stands out on verified points that are easy to evaluate before purchase. It is fully assembled, it uses soft-close full extension slides, and it includes adjustable shelves plus adjustable door mount brackets.
Another useful comparison point is installation control. Some pullouts may require more trial-and-error to align the door. Here, Rev-A-Shelf specifies a micro-adjustment screw for precise door alignment and door mount brackets that allow up to 5 inches of flexibility for trouble-free installation on any door style. That combination can help reduce fit issues during install, especially in bath cabinetry where openings are tighter and hardware clearances matter.
Stability is another practical factor. Rev-A-Shelf identifies patented tri-slides that prevent side-to-side motion and provide complete stability when pulled out of the cabinet. For a vanity organizer that may hold grooming tools and be opened often, that kind of guided movement can be more important than appearance alone.
Finally, fit details should drive the decision. The listed dimensions are 8-7/16 inches wide, 19-5/8 inches deep, and 25-3/4 inches high. The supplied rub bushings are for 1-1/2 inch or 1-3/4 inch face frames. If your project has unusual cabinet construction, inset conditions, or clearance concerns around plumbing or other obstructions, confirm those details with the manufacturer documentation before ordering.
This vanity cabinet organizer fits only where the cabinet opening and interior space can accept the listed 8-7/16 inch width, 19-5/8 inch depth, and 25-3/4 inch height.
The RS445-VCG25SC-8 wood pullout shelf comes fully assembled according to Rev-A-Shelf product data.
The Rev-A-Shelf organizer includes adjustable door mount brackets and a micro-adjustment screw for precise door alignment.
This Rev-A-Shelf wood pullout shelf includes rub bushings for 1-1/2 inch or 1-3/4 inch face frames, so those frame sizes should be checked before install.
The wood pullout shelf uses soft-close full extension slides, which are designed to extend fully for better cabinet access.
The included stainless steel bins are designed for hair dryers and curling irons on this Rev-A-Shelf 445 Series organizer.
The door mount brackets allow up to 5 inches of flexibility for installation on any door style listed in the product description.
This vanity cabinet organizer requires enough clear interior depth, height, and door clearance, so obstructions should be measured before ordering. Follow manufacturer installation guidance and local building requirements where applicable.
Before ordering a bath cabinet organizer, match the cabinet opening to the listed product size and confirm that the door can be mounted with the available adjustment range. Check face frame size, interior depth, and any obstructions that could affect pullout travel. Included components on this Rev-A-Shelf unit are clearly geared toward vanity storage, including adjustable shelves, door mount hardware, and two stainless steel bins for grooming tools. If your project depends on load limits, compliance data, or other technical details not shown here, confirm those points in current manufacturer documentation first.
Rev-A-Shelf wood pullout shelf is a practical choice when you need a fully assembled vanity cabinet organizer with soft-close full extension slides and door-mount adjustability. This RS445-VCG25SC-8 model includes adjustable shelves, alignment hardware, rub bushings for listed face frame sizes, and two stainless steel bins for hair dryers and curling irons. Before purchase, confirm cabinet dimensions, face frame conditions, and door clearance so the organizer fits the application as intended.
Sold In: 1 Each
