Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PolyBak PB69 veneer backer from Richwood Industries is a PolyBak backer designed to balance and support laminated substrates on woodworking projects where a stable backing layer is needed across a 49 inch by 97 inch sheet. The standard performance level gives a predictable working base for building casework, fixtures, or panels where a consistent back side is required. The nominal .020 inch thickness keeps the sheet thin while still acting as a structural backer that resists flex in everyday shop handling. The brown color provides a neutral back face that suits utility cabinet backs or concealed panel sides where appearance still needs to be uniform. As part of the Richwood Industries backers line, this PB69 panel is built specifically for backer and overlay use rather than decorative face work.
The nominal .020 inch thickness of the PolyBak PB69 veneer backer gives fabricators a thin profile that still behaves as a functional balancer on laminated substrates. This thickness helps panels track predictably through presses and saws, since the backer layer does not create a large step at the panel edge. Because the product is 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, installers can move, clamp, and cut backed panels with reduced risk of the backer layer failing under normal shop stresses. The 49 inch by 97 inch size works well with panel handling equipment sized around standard sheet goods, so crews can integrate this backer into existing material flow without special handling steps.
PolyBak PB69 veneer backer is most commonly used as a backer for laminated substrates, so it fits directly into panel build-ups where decorative laminate or other surfacing is bonded to one face. In those assemblies, the PB69 backer on the opposite side supports a more balanced construction because its nominal .020 inch thickness adds structure without acting as a decorative surface. The brown color suits interior panel backs, cabinet interiors, or structural surfaces where a clean, uniform back side is preferred over a raw core. Since it is also used as a paintable overlay for substrates and columns, shops can apply this backer to cores that will receive paint, taking advantage of the PB69 surface as the paint-ready layer in column wraps or similar components.
Within the broader Richwood Industries backers range, this 49 inch by 97 inch sheet aligns to applications where full-size panels are being processed. The standard width and length provide coverage for many cabinet side, shelf, and partition sizes while still allowing rips and crosscuts to match project dimensions. Because PB69 is positioned as a top PolyBak backer in the Richwood line, buyers working on repeated laminated substrate jobs can select this sheet when they want the strength advantage over saturated Kraft paper backers of similar thickness.
The fact that PB69 is 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness directly affects how laminated substrates hold up during pressing, machining, and installation. Stronger backing helps panels stay intact at corners and cutouts, especially where edges are trimmed close to the core. This added strength can support clean machining around hardware openings or cutouts in column wraps that use PB69 as a paintable overlay for substrates and columns.
The 49 inch width and 97 inch length simplify layout for many standard casework jobs, since these dimensions are common in woodworking and laminate shops. Having a sheet sized to these standards means panel saw programs can treat PB69-backed panels in similar fashion to other sheet goods. The nominal .020 inch thickness helps balance the face material on laminated substrates without changing the core thickness significantly, which is important when panels must align with adjacent components. The brown color also provides a consistent look on non-show faces, which aids production where panel backs are visible in use, such as open shelving or service sides of fixtures.
PolyBak PB69 veneer backer is most commonly used as a backer for laminated substrates and is also used as a paintable overlay for substrates and columns, supporting both laminate backing and paint-grade surfaces.
The nominal .020 inch thickness keeps the PolyBak PB69 veneer backer thin while still balancing laminated substrates, so panels maintain near-standard thickness and handle predictably during machining and installation.
PolyBak PB69 veneer backer is 2.5 times stronger than the leading saturated Kraft paper backer of the same thickness, which supports tougher handling, trimming, and machining without the backer layer failing as easily.
This PolyBak PB69 veneer backer sheet has a standard width of 49 inches and a standard length of 97 inches, matching common panel sizes used in cabinet and fixture construction.
PolyBak PB69 veneer backer is used as a paintable overlay for substrates and columns, providing a backer surface that can serve as the paint-receiving layer on those components.
The PolyBak PB69 veneer backer is brown, giving panel backs and overlay surfaces a neutral, uniform appearance that suits interior cabinet areas and structural faces.
PolyBak PB69 veneer backer from Richwood Industries gives woodworking shops a standard performance PolyBak backer built for laminated substrates and paintable overlay work. The nominal .020 inch thickness, brown color, and 49 inch by 97 inch sheet size align neatly with typical panel construction and finishing tasks, while strength 2.5 times greater than the leading saturated Kraft paper backer of the same thickness supports confident handling and machining. For projects using laminated substrates or paintable overlays on substrates and columns, this PB69 sheet offers a practical backer choice that fits directly into established panel production routines.
Sold In: 1 Sheet
