
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Porter Cable 22 gauge staple identifies this as a light-gauge fastener that suits applications where a finer staple leg helps reduce material disturbance during driving. The 22 gauge construction supports fastening tasks where a smaller wire size is preferred for controlled penetration.
The 3/8 inch crown detail describes the width of the staple bridge, so it seats across the work surface in a predictable footprint when driven. This crown size helps installers plan staple spacing along an edge or face for consistent hold across the run.
The 3/8 inch leg length describes how far the staple penetrates into the material, which matters when selecting stock and backing thickness so the legs engage the substrate properly. Matching leg length to material stack supports secure fastening without excessive projection.
The Porter Cable Corporation brand identifies a manufacturer recognized in fastening tools and consumables, which assists buyers who standardize jobs around consistent staple dimensions and part references such as PUS38G.
The 3/8 inch crown measurement defines how this staple sits across the work surface, which matters when fitting into areas with limited face width or when aligning rows along narrow framing members.
The 3/8 inch leg specification gives the driven depth reference, supporting selection where the staple must anchor into a base layer without over-penetrating through thinner assemblies. Knowing this dimension streamlines fastener choice across different build-ups.
The 22 gauge designation ties the staple to tools and driving expectations designed for that wire size, supporting workflow planning around air pressure, material density, and the level of surface imprint acceptable on visible faces.
The Porter Cable 22 gauge x 3/8 inch crown x 3/8 inch leg staple sits within the Staples class of fasteners, so it serves fastening needs where a wire staple profile is preferred over nails or screws. The 3/8 inch crown width helps it fit applications that require a moderate bridge across joints or material layers, such as fastening thin sections where wider crowns may be unnecessary.
The 3/8 inch leg length positions this staple for situations where the combined thickness of facing material and substrate can be engaged effectively within that depth. This leg length supports use where installers want legs to anchor into a base without substantial protrusion. The defined 22 gauge wire size further supports use in lighter fastening conditions, where a slimmer wire helps manage surface impressions on the work.
Because the manufacturer part number PUS38G clearly identifies this configuration, it supports consistent selection for jobs that have standardized on this combination of 22 gauge wire, 3/8 inch crown, and 3/8 inch leg. Using the same part number across projects reduces variation in fastener behavior, which supports predictable performance when fastening similar assemblies over time.
The PUS38G designation captures a repeatable set of dimensions: 22 gauge wire, 3/8 inch crown, and 3/8 inch leg length. Keeping these factors constant means that once drive depth and air settings are dialed in for a material stack, installers can expect similar results each time this staple is used in comparable conditions.
The 3/8 inch crown width helps establish a consistent bearing area on the surface, which assists in distributing holding force across the staple head. That consistent bearing area supports regular spacing patterns, so crews can plan staple layouts that are uniform from panel to panel. The 3/8 inch leg depth further supports repeatability, because installers know how much of the fastener is engaging the base layer.
The 22 gauge wire complements these dimensions by defining the cross-sectional size driving into the material. When the same gauge is used across similar work, drive behavior, penetration characteristics, and surface marking tend to align with previous experience. This combination lets teams align their fastening approach with the established characteristics of the PUS38G staple.
The Porter Cable PUS38G staple is 22 gauge with a 3/8 inch crown and 3/8 inch leg, so it provides a light-gauge fastener with a moderate crown span and shallow penetration depth.
The 3/8 inch crown on this staple defines the width of the bridge across the surface, which sets how much area the head spans when clamping materials together.
This staple has a 3/8 inch leg length, so under normal driving it penetrates up to that depth into the material stack for engagement with the substrate.
The PUS38G is classified as a staple within the fasteners category, so it serves applications where a wire staple format is required instead of nails or screws.
The PUS38G 22 gauge staple is manufactured by Porter Cable Corporation, aligning it with the companys line of fasteners and related tooling.
The PUS38G part number uniquely identifies this 22 gauge, 3/8 inch crown, 3/8 inch leg staple, helping purchasing and inventory stay aligned with this exact configuration.
The defined 22 gauge, 3/8 inch crown, and 3/8 inch leg measurements on this Porter Cable Corporation staple give installers precise dimensions to match with material stacks and fastening plans. The clear PUS38G part number supports straightforward reordering when projects rely on this configuration.
Choosing this staple profile aligns jobs around a consistent fastener format within the Staples class, helping crews maintain predictable driving behavior and holding characteristics wherever this size is specified across their workflows.
Sold In: 1 Package