
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
14 inch full extension drawer slides move the drawer fully out of the cabinet, which opens the full 14 inch length for access so installers and users can reach contents without wrestling around the face frame. This Pro Value Series PRO 2.0 side mount model uses standard ball bearing construction, so the drawer rides on bearings instead of metal-on-metal contact for consistent travel in typical shop-built or production cabinetry. The slides are unhanded side mount units, which allows the same DSPRO2.0-14 part to be used on either the left or right side and simplifies ordering and inventory. A 100 lb weight rating supports typical residential and light commercial drawer loads over the 14 inch length, which supports everyday storage without overbuilding the hardware. The cold rolled steel material carries a zinc finish, giving the slide a familiar look that coordinates with common cabinet hardware while resisting normal shop and jobsite environments.
This Pro Value Series DSPRO2.0-14 model is a side mount drawer slide, so it is installed along the cabinet side and drawer side rather than under the box, which suits standard frameless and many face-frame layouts. The specified 1/2 inch plus 1/32 inch minus 0 side clearance guides the total gap needed between drawer and interior cabinet walls to keep the ball bearing members moving freely. The recommended fasteners are #8 x 7/16 inch Phillips pan head, which matches the slide holes and helps seat the slide firmly to wood cabinet members. The zinc finish over cold rolled steel creates a familiar surface that works well in typical interior cabinet conditions where metal hardware contact and alignment accuracy matter. The PRO 2.0 designation and standard ball bearing configuration give installers a known feel during mounting and adjustment, which streamlines repeat installations in a production environment.
The Pro Value Series 14 inch full extension standard ball bearing drawer slides PRO 2.0 Series, unhanded side mount zinc DSPRO2.0-14 are used in cabinets that require a 14 inch slide length and side mount layout, so they fit many kitchen, bath, and shop drawer configurations matching that depth. The 32mm pattern support makes these slides suited to casework built around system 32 boring, where line-bored holes define hardware positioning. The 100 lb weight rating aligns with typical base and wall cabinet storage applications, so drawers carrying utensils, supplies, or parts remain within the specified load range. The continuous bearings provide smooth action over the full 14 inch travel, which benefits drawers that are opened and closed frequently during daily tasks. The zinc finish over cold rolled steel matches common cabinet hardware finishes, so exposed slide edges look consistent in open-shelf or utility installations.
The unhanded design of the DSPRO2.0-14 lets the same slide part install on either side of the drawer, which simplifies stocking for installers managing multiple cabinet runs. The lever disconnect allows the drawer member to release from the cabinet member, which speeds drawer box installation and removal during finishing, adjustments, or service. Fixed rear brackets are available, giving another mounting option when rear anchoring is preferred in a cabinet, which can help align slides in deeper cases. The specified 1/2 inch plus 1/32 inch minus 0 side clearance, combined with the ball bearing mechanism, keeps the drawer tracking square under load, reducing side rub that can occur when clearances are improvised. Industry ratings from BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 document that the slide design has been built to established standards, which supports consistent operation across repeated installations using this PRO 2.0 Series model.
The Pro Value Series DSPRO2.0-14 slide has a 14 inch length, so drawer boxes are typically built around that length when planning cabinet depth and slide setback.
The DSPRO2.0-14 drawer slide uses a side clearance of 1/2 inch plus 1/32 inch minus 0, which defines the gap needed between drawer sides and cabinet sides for smooth travel.
The Pro Value Series 14 inch full extension standard ball bearing drawer slides have a 100 lb weight rating, which matches many residential and light commercial storage loads.
The DSPRO2.0-14 lever disconnect lets the drawer member separate from the cabinet member, which simplifies mounting, finishing, and later removal of drawer boxes.
The DSPRO2.0-14 slide is specified with a 32mm pattern, which aligns with line-bored system 32 cabinet construction for predictable hole alignment and faster mounting.
The Pro Value Series DSPRO2.0-14 drawer slides specify #8 x 7/16 inch Phillips pan head fasteners, which match the slide holes and help secure the members to cabinet and drawer sides.
The Pro Value Series DSPRO2.0-14 14 inch full extension standard ball bearing drawer slides combine a 100 lb weight rating, side mount layout, and unhanded design, which suits many cabinet projects needing predictable, repeatable hardware. The 1/2 inch plus 1/32 inch minus 0 side clearance, 32mm pattern drilling, and lever disconnect give cabinetmakers clear dimensions and handling advantages during construction, finishing, and installation. Order these zinc finished cold rolled steel slides from Wurth Baer Supply when a 14 inch full extension side mount solution fits the drawer and casework design.
Sold In: 20 Set