Pro Value Series 18" Full Extension Standard Ball Bearing Drawer Slides PRO 2.0 Series, Unhanded Side Mount Zinc - DSPRO2.0-18

18 Inch Full Extension Drawer Slides For Smooth Travel

18 inch full extension drawer slides from the Pro Value Series provide full access to an 18 inch drawer, so the box clears the cabinet face for easier loading and visibility. These side mount, standard ball bearing slides use continuous bearings to support controlled movement across the full stroke, which supports repeatable function on frequently used drawers. The cold rolled steel construction delivers a solid slide structure for typical cabinet environments. A zinc finish covers the slide members, giving a clean, neutral look inside cabinets where metal parts remain visible. Each slide is unhanded, so a single model DSPRO2.0-18 works on either side of the drawer, which can simplify planning and stocking. The design uses a lever disconnect, letting the drawer member separate from the cabinet member during installation or service, which supports straightforward fitting and removal.

Key Drawer Slide Details For Daily Use

• The 18 inch length sets the slide travel, allowing an 18 inch drawer to extend fully from the cabinet, which helps use the entire drawer depth for storage without obstructed rear access.
• A weight rating of 100 lb defines the load these slides are designed to carry, which aligns with typical residential and light commercial drawer loads where consistent movement under weight is important.
• Side clearance of 1/2 inch plus 1/32 inch on each side sets the fit between drawer and cabinet, so builders can size drawer boxes accurately for a smooth running gap without excess play.
• The side mount, standard ball bearing design supports lateral installation on cabinet sides, giving a familiar mounting layout for many cabinet shops and installers using this slide class.
• The 32mm pattern allows hole spacing to follow common 32mm cabinet systems, which can speed boring and mounting when casework already follows this drilling standard.
• Industry ratings BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 indicate the slides are tested to recognized standards, which supports confidence when selecting hardware for specified projects.

Mounting And Fit Details For DSPRO2.0-18 Slides

The Pro Value Series DSPRO2.0-18 slides mount on the cabinet sides in a side mount configuration, giving an installation style that aligns with standard face frame and frameless cabinet construction. The specified side clearance of 1/2 inch plus 1/32 inch establishes the gap required between drawer box and cabinet wall, so woodworkers can set their drawer width during layout and cutting. These slides use a 32mm pattern, matching cabinet systems drilled on 32mm centers, which can streamline jig use and repetitive production work. Recommended fasteners are #8 x 7/16 inch Phillips pan head screws (WW46000), so installers can pair the slide with screw shank and head geometry intended for the mounting holes. Fixed rear brackets are available, adding an option for supporting the back of the slide, which can be useful when the cabinet construction favors bracket attachment at the rear.

How These Pro Value Series Slides Work In Practice

Where This Side Mount Drawer Slide Performs Best

The Pro Value Series 18 inch full extension standard ball bearing drawer slides fit projects that call for side mount hardware with predictable performance. The 18 inch length suits midsize drawers in kitchen, bath, office, or shop casework where full extension is needed to see and reach stored items at the back. Continuous bearings ensure smooth and quiet performance along the entire slide travel, which benefits drawers that open and close repeatedly throughout the day. With a 100 lb weight rating, these slides serve applications where contents may add up across the full drawer depth, such as utensil storage, office files, or shop supplies. The zinc finish over cold rolled steel supports use in typical indoor environments, while also presenting a consistent appearance when drawers are open and hardware is visible. Because the slides are unhanded, a single DSPRO2.0-18 model can be used for either left or right side locations, which simplifies inventory for installers handling multiple cabinets.

Details That Support Alignment, Removal, And Replacement

The DSPRO2.0-18 design centers on a side mount layout with defined side clearance, which helps installers align drawer members parallel to cabinet members for smooth tracking. The side clearance of 1/2 inch plus 1/32 inch informs drawer box width decisions, helping reduce trial-and-error fitting when building multiples. A 32mm pattern integrates into cabinet lines drilled on 32mm centers, allowing slides to reference consistent hole locations along the case, which improves repeatability in production runs. The lever disconnect feature lets the drawer member separate from the cabinet member during installation, making it easier to mount each piece, adjust fit, or remove the drawer later for finishing or service. Fixed rear brackets are available, offering an option when rear mounting points in the cabinet are preferred, which can help align the slide in cases where side attachment alone is less convenient. Industry ratings from BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 show that this slide model aligns with widely recognized performance benchmarks, which can be relevant on projects referencing these standards.

Common Questions About DSPRO2.0-18 Drawer Slides

Select DSPRO2.0-18 Slides For Your Next Run

The Pro Value Series 18 inch full extension standard ball bearing drawer slides DSPRO2.0-18 combine side mount installation, 100 lb weight rating, and continuous bearings in a cold rolled steel, zinc finished design. With defined 1/2 inch plus 1/32 inch side clearance and a 32mm pattern, these slides align with common cabinet construction practices and drilling systems. The unhanded configuration, lever disconnect, and availability of fixed rear brackets support efficient installation and service across multiple cabinets. For projects calling for 18 inch full extension drawer slides with industry-recognized ratings, this model offers a practical option for production and retrofit work.