Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
22 inch full extension drawer slides from the Pro Value Series use standard ball bearings to carry drawers out to full extension, so cabinet access stays open all the way to the back. The DSPRO2.0-22 model is a side mount drawer slide, which positions on the cabinet sides to support common drawer box construction in shops using framed or frameless layouts. These slides are rated for a 100 lb weight rating, so they handle typical residential and light commercial drawer loads without overstressing the runners. The material is cold rolled steel, which provides a stable, consistent track surface for the ball bearings as the drawer moves. A zinc finish is specified, giving the steel a protective coating that helps resist normal shop and jobsite humidity. Continuous bearings run the length of the slide, which keeps motion smooth and quiet throughout the entire stroke, even when the drawer is fully extended under load.
This Pro Value Series DSPRO2.0-22 slide is specified as a side mount ball bearing drawer slide, which positions along the drawer sides rather than under the drawer, matching common industry practice in casework shops. Side clearance of 1/2 inch plus 1/32 inch -0 sets the required gap between the drawer box and cabinet interior, which guides drawer width planning when laying out parts on the bench. The slide uses a 32mm pattern, which lines up with standard 32mm system holes to speed cabinet member installation in production environments. Recommended fasteners are #8 x 7/16 inch Phillips pan head, which match the hole sizing in the members for a secure mechanical connection. Fixed rear brackets are available for this slide, which support mounting the cabinet member at the back of the case when that attachment method is preferred. A lever disconnect is specified, which allows the drawer member to release from the cabinet member for drawer removal and reinstallation once mounted.
The DSPRO2.0-22 drawer slide sits in the Side Mount Drawer Slides product class, which aligns it with projects where slides mount directly to cabinet sides on face frame or frameless constructions. Its 22 inch length supports drawers sized for deeper base cabinets, which helps standardize depth across kitchen and shop runs using common carcass dimensions. A weight rating of 100 lb positions this slide for drawers that hold general storage, utensils, office items, or parts bins within that load range. The side clearance specification of 1/2 inch plus 1/32 inch -0 defines the working gap for the drawer box, which keeps the drawer moving freely without excessive side-to-side movement. Because the slide is unhanded, the same part number DSPRO2.0-22 installs on both left and right sides, which streamlines ordering and bin management in busy shops that build multiple boxes per day.
The Pro Value Series DSPRO2.0-22 uses continuous bearings along the slide, which keep contact between the ball bearings and race surfaces through the full stroke, supporting smoother engagement from closed to full extension. A full extension design is specified, which brings the drawer front out so the back of the box clears the cabinet face, improving visibility and reducing reach for stored items near the rear. The cold rolled steel material provides accurately formed channels for the standard ball bearings, which helps maintain alignment and reduces racking when drawers are cycled repeatedly. Zinc finish on the steel adds a protective layer, which helps the slides maintain their function in typical indoor cabinet environments over time. Industry ratings listed as BHMA, KCMA, BIFMA, ANSI, and SEFA 8.99 show that this slide is evaluated against recognized standards, which supports confidence when matching hardware selections to project specifications. Lever disconnect on this slide lets installers separate the drawer member from the cabinet member, which helps during finishing, transport, or service when drawers need to be removed and then reset onto the installed runners.
The DSPRO2.0-22 is a Pro Value Series side mount standard ball bearing drawer slide, which supports drawers along the cabinet sides using ball bearings for guided travel.
The DSPRO2.0-22 drawer slide has a 100 lb weight rating, which sets the maximum intended load for the drawer and guides how heavily the drawer should be stocked.
The 22 inch length on the DSPRO2.0-22 slide is suited to drawer boxes designed around that runner size, aligning drawer depth with deeper cabinet carcasses.
The DSPRO2.0-22 specifies side clearance of 1/2 inch plus 1/32 inch -0, which defines how much space to allow between drawer sides and cabinet case for proper movement.
The lever disconnect on the DSPRO2.0-22 lets the drawer member release from the cabinet member, which simplifies removing and resetting drawers during finishing or service.
The DSPRO2.0-22 slide lists recommended fasteners as #8 x 7/16 inch Phillips pan head, which match the mounting holes for securing the members to wood components.
The Pro Value Series DSPRO2.0-22 22 inch full extension side mount ball bearing drawer slide combines a 100 lb weight rating, cold rolled steel construction, and zinc finish, which supports day-to-day cabinet use in kitchens, baths, offices, and shops. Its side clearance of 1/2 inch plus 1/32 inch -0 and 32mm pattern give cabinet builders predictable layout points for drilling and sizing drawer boxes across repeated carcass designs. By using an unhanded design, continuous bearings, and lever disconnect, this slide supports straightforward installation, removal, and smooth operation once the cabinets are in service. For projects calling for a 22 inch side mount ball bearing slide with standardized patterns and industry ratings, the DSPRO2.0-22 from Wurth Baer Supply aligns hardware choice with production-focused cabinet work.
Sold In: 15 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW46000 Mfr# 3670000235961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000235961 1000 - 1000/Box |
