LED 9.2W Warm White Linear Light For Cabinets

LED 9.2W warm white linear light, 22" Nickel from Tresco Lighting delivers 356 lumens per foot, so a short run produces strong illumination for task or accent work without needing larger fixtures. The warm white 3000K color outputs a softer tone, supporting applications where comfortable, residential-style light is preferred over cooler light. Operating at 12 volts with 5 watts per foot, this LED linear lighting fits common low-voltage layouts where power supplies and controls are already based on 12V systems. The 50,000 hours of lamp life means the light is designed for long-term use, reducing the frequency of changeouts in built-ins or hard-to-reach cabinets. Luniform technology emits light that is uniform, so individual LED dots are not visible, which matters when the fixture is in direct view or close to reflective surfaces. The 22 inch length lets installers span common cabinet and shelf sections with a single linear piece.

Key LED Linear Lighting Details For Projects

• 356 lumens per foot provides substantial output for its size, helping installers achieve bright linear runs in cabinets or displays using compact 22 inch segments.
• 5 watts per foot at 12 volts keeps power demand predictable, allowing straightforward matching to low-voltage power supplies in multi-light layouts.
• Warm white 3000K color creates a softer appearance, which fits kitchens, residential casework, and areas where a comfortable tone supports the overall design.
• 50,000 hours of lamp life supports long service intervals, which is valuable when the light is installed in finished millwork or areas that are difficult to access later.
• 110 degree beam spread pushes light broadly across surfaces, reducing hot spots and helping achieve even illumination along counters or shelving.
• Luniform technology produces a uniform light band with no visible LED dots, giving a cleaner look on glossy surfaces and under shallow cabinet lips.

Installation And Linear Run Planning Details

This Tresco Lighting LED linear lighting piece is identified as SimpLED 2.0, which works with Tresco's power supplies, dimmers, and switches, supporting integrated low-voltage lighting systems using the same family of controls. The 12 volt rating lets installers connect it within typical cabinet and display lighting circuits that are already set up for 12V LED runs. With a max continuous run of 10 feet, planning multiple 22 inch sections within that limit keeps the system operating within its intended load range. The size of 3/8" high by 3/4" wide gives a slim profile, helping it recess or surface-mount into tight channels, under shelves, or along cabinet edges where clearance is limited. The 22 inch length ties neatly into common cabinet module sizes, which simplifies layout when lining up several lights in a straight run.

LED Linear Lighting Use And Performance On The Job

Where This 22 Inch Linear Light Works Best

This LED 9.2W warm white linear light, 22" Nickel is part of Tresco Lighting's LED linear lighting class, so it is suited to straight-run applications in cabinets, shelving, and similar casework where linear coverage is required. The warm white 3000K output supports use in spaces where a more comfortable, inviting light character is important, such as residential kitchens, built-in wall units, or lounge areas. At 356 lumens per foot, it delivers notable brightness along the length, so when used in shorter segments it still produces a defined work or display zone. The 110 degree beam spread sends light broadly across surfaces directly beneath and to the sides, making it suitable for under-cabinet washing of backsplashes, counters, or display shelving. The nickel finish referenced in the name helps it coordinate in installations where visible trim and nearby hardware use similar tones, aligning the fixture appearance with surrounding components.

Why SimpLED 2.0 Details Matter For Results

The SimpLED 2.0 designation in the SAP description and web description indicates this light works with Tresco's power supplies, dimmers, and switches, which simplifies system design when building a matched low-voltage lighting layout. Using a single family of components supports consistent dimming response and control behavior along an entire run. The max continuous run of 10 feet means installers can link multiple 22 inch sections up to that combined length while staying within the described operating range, which is important for planning even illumination across longer cabinets. The size of 3/8"H x 3/4"W creates a low-profile form that tucks into shallow channels or under narrow face frames, helping preserve sightlines in finished cabinetry. Luniform technology, described as emitting a light that is uniform with no visible LED dots, leads to smoother reflections on high-gloss countertops, backsplashes, and glass, giving a more continuous light band. The 50,000 hours of lamp life supports long-term performance in commercial or residential installations where consistent appearance over years is important.

Common Questions About This Tresco Linear Light

Select This Linear Light For Warm 3000K Runs

The Tresco Lighting LED 9.2W warm white linear light, 22" Nickel combines 356 lumens per foot output, 3000K warm white color, and a slim 3/8"H x 3/4"W profile to support cabinet, shelf, and display projects that call for low-voltage linear lighting. With 12 volt operation, 5 watts per foot, and a max continuous run of 10 feet, it integrates into SimpLED 2.0 layouts using Tresco power supplies, dimmers, and switches. For installations where uniform light without visible LED dots and long 50,000 hour lamp life are priorities, this L-SMPHO22-WNI-1 linear segment offers a focused solution ready for warm white runs.