Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Surface mount bench bracket from Rangine Corp/Rakks is a bench support bracket designed for seating applications that use 5 ft wooden planking. The 14-1/4 in height and 15-3/4 in length give installers a defined support size, which helps when laying out consistent bench spacing along a wall or frame. Manufactured as a surface mount bench bracket, it works as a structural support arm where the bracket is fixed to a supporting surface and the planking spans between brackets. The bench bracket is part of the Bench Brackets class, so it is built specifically to act as the primary support element under a seating surface rather than a decorative angle. This focused role helps buyers match the bracket to jobs where fixed, wall-mounted bench seating is required.
The 18-1/4 in overall depth before mounting gives a clear starting dimension from the wall structure to the front of the bench support, which simplifies planning when coordinating with flooring, base trim, or aisle widths. Once installed, the arm protrudes 16 in from the outside of finished drywall, so the effective seat depth from the visible wall surface to the front support is defined and repeatable across all brackets on the run. The 14-1/4 in height paired with the 15-3/4 in length helps installers standardize bracket spacing and alignment, so each support sits at the same elevation and projection for a straight, level seating line.
This Rakks surface mount bench bracket is used for seating applications incorporating 5 ft wooden planking, so it fits projects where continuous wood bench tops run along a supporting surface. The 14-1/4 in height allows the bracket to sit as a vertical support element beneath the bench planks, helping set the vertical relationship between the supporting surface and the seating plane. With an overall depth of 18-1/4 in before mounting, the bracket establishes the underlying geometry for the bench projection, so each bracket can be laid out along the length of the wall to carry the 5 ft wooden planking at consistent spacing. Because the arm protrudes 16 in from the outside of finished drywall, installers know exactly how far the structural support extends into the room, which helps coordinate bench placement with circulation paths and adjacent casework.
The supporting arm is pre-drilled with 12 holes to provide secure installation, so the installer has multiple fixed locations to place fasteners through the bracket and into supporting framing or structural members. This pre-drilled pattern removes layout guesswork on the bracket itself and allows loads from the 5 ft wooden planking to be transferred through several connection points, which supports a more stable seating assembly over time. The bracket is manufactured from 2 in x 3 in T to provide maximum stiffness, so the T-profile acts as a rigid support under the bench surface and helps reduce flexing when the seating is loaded. The 15-3/4 in length works together with the 18-1/4 in overall depth to give a defined footprint for each bracket, so installers can plan bracket spacing along the planking knowing exactly how much structural support each unit provides under the seating span.
The Rakks surface mount bench bracket is used for seating applications incorporating 5 ft wooden planking, so it supports wood bench runs built from 5 ft plank segments.
The supporting arm is pre-drilled with 12 holes to provide secure installation, giving multiple fastener locations so loads are spread across more anchors into the structure.
The 18-1/4 in depth reflects overall depth before mounting, so it defines the total projection of the bench support from the mounting surface before finishes.
The arm will protrude 16 in from the outside of finished drywall, establishing the working seat depth from the visible wall surface into the room.
The bracket is manufactured from 2 in x 3 in T to provide maximum stiffness, so the T-shaped profile resists bending and supports seating loads more rigidly.
The EH-1416B is a surface mount bench support bracket that acts as the primary structural support under 5 ft wooden planking in fixed seating installations.
The Rakks EH-1416B surface mount bench bracket combines a 14-1/4 in height with 15-3/4 in length and an 18-1/4 in overall depth, so it gives installers known geometry when laying out fixed seating. The 16 in arm projection from finished drywall and the 12 pre-drilled holes for secure installation help translate those dimensions into predictable mounting and support locations under 5 ft wooden planking. For seating runs that need a defined bench depth and a stiff, T-shaped support under the planks, this bench support bracket offers a clear set of dimensions and mounting points to plan around.
Sold In: 1 Each
