Amerock Monument cabinet pull is a zinc handle in the Monument collection finished in polished nickel, so it gives cabinet doors and drawers a bright, uniform look that matches other polished nickel decorative hardware. The 5-1/16 in (128 mm) center-to-center drilling sets consistent handle spacing from screw to screw, which keeps multiple cabinets aligned along the run. Overall length of 6-7/16 in provides ample gripping area along the bar, making it practical for frequent use on kitchen or shop cabinetry. A 1 in projection sets the pull off the surface enough for solid finger clearance, which supports comfortable opening without knuckles dragging the door face. The 1 in width balances the projection and length, helping the pull sit visually centered on face frames or slab drawer fronts. With Amerock Corporation branding and BP36568PN part numbering, this pull ties directly into Monument Series layouts.
The 128 mm (5-1/16 in) center-to-center drilling drives how holes are laid out in the door or drawer, so it directly affects whether this pull matches existing drilling patterns on replacement jobs. A 6-7/16 in overall length means the ends of the pull extend beyond the screw centers, which helps cover minor scuffs around old mounting points on retrofit work if the spacing matches. With 1 in of projection, the handle stands far enough off the surface to grab even when doors sit close to adjacent cabinets, supporting access on tight runs. The 1 in width also keeps the pull narrow enough for use on smaller drawer fronts, where maintaining clearance from neighboring hardware edges is important.
The polished nickel finish aligns with cabinetry that already uses polished nickel decorative hardware and moldings, so this handle can be applied across doors and drawers in coordinated rooms. In kitchens or bath vanities, the 6-7/16 in length provides a handle span that works across both narrower uppers and standard-width base cabinet fronts. On shop casework or utility cabinets, the zinc construction and 1 in projection offer a straightforward grip point, making frequent access to stored tools or supplies more comfortable along long banks of cabinets. The 5-1/16 in center-to-center measurement also matches projects that are laid out specifically for 128 mm hardware, supporting a consistent visual rhythm across all fronts when repeating the drilling pattern.
The defined 5-1/16 in (128 mm) center-to-center value allows jigs or templates to be set once and reused, which streamlines drilling through multiple doors or drawers in the same run. Overall length of 6-7/16 in gives the installer a predictable end-to-end dimension, helping position the pull at the same setback from door edges for uniform alignment. With a 1 in projection, the installed pull creates a known standoff from the surface, which helps avoid interference when doors open near walls or tall panels. The 1 in width provides a consistent footprint that pairs well with standard rail dimensions, supporting tight, repeatable layouts on face frame or frameless cabinets. Using the Amerock Monument cabinet pull with BP36568PN part numbering also keeps ordering and reordering straightforward when matching existing Monument Series installations.
The Amerock Monument Series pull has a 5-1/16 in (128 mm) center-to-center dimension, which sets the screw spacing and guides drilling or replacement of existing 128 mm hardware.
The pull length is 6-7/16 in, so it extends beyond the screw centers to provide more gripping area and can help cover marks around compatible existing mounting holes.
This Amerock Monument cabinet pull is made of zinc, giving the handle a solid metal body suitable for regular opening and closing on cabinets and drawers.
The pull uses a polished nickel finish, offering a bright, reflective look that coordinates with other polished nickel decorative hardware in the same space.
The Amerock Monument Series pull projects 1 in from the surface, providing finger clearance that supports a comfortable grip on cabinet doors and drawers.
The pull is 1 in wide with a 1 in projection, creating a balanced, compact profile that fits well on standard cabinet rails and smaller drawer fronts.
The Amerock Monument cabinet pull with BP36568PN part number combines a 5-1/16 in (128 mm) center-to-center layout with a 6-7/16 in overall length, which suits straight runs of cabinets using 128 mm drilling. The polished nickel finish keeps hardware visually aligned with other polished nickel elements, while zinc construction provides a solid metal handle for doors and drawers in kitchens, baths, or shop casework. Matching the 1 in projection and 1 in width across all fronts maintains consistent grip feel and sightlines. For projects built around the Monument collection, this Amerock Monument Series pull gives a clearly defined size and finish to plan around.
Sold In: 1 Each
