Domi Snap-On Mounting Plates Titanium Two Cam Adjustment, Die-Cast Steel, Screw-On Attachment, 2mm Height

Domi Snap-On Mounting Plates For Salice Hinges

Domi snap-on mounting plates are hinge mounting plates designed for Salice hinges, so they connect Salice hinge arms to the cabinet side and establish a consistent reference plane for door alignment. This Salice America BAR3R26 plate has a 2mm height, which sets the hinge position off the cabinet wall to match layouts built around that plate height. The plate is manufactured as a die-cast steel hinge mounting plate, giving a rigid base that resists deformation during door adjustment or everyday use. A titanium description identifies the finish style so installations using Salice titanium components can keep a consistent appearance across the cabinet run. The plate belongs to the hinge mounting plates product class, so it fills the role of the cabinet-side component in a Salice concealed hinge system.

Key Salice Mounting Plate Details For Installers

• The Domi snap-on mounting plates are compatible with all Salice hinges, so one plate style can serve across multiple Salice hinge lines in a shop or jobsite inventory.
• Construction in stamped steel or die-cast steel with nickel plating resists corrosion, which helps the hinge system maintain function in typical cabinet environments over time.
• The two cam adjustment system provides cam height adjustment of plus or minus 2 mm, allowing fine tuning of door position without repositioning the plate.
• The same two cam system provides cam depth adjustment from -0.5 mm to +2.8 mm, so the installer can move the door closer or farther from the case to dial in reveals.
• An open hole for #6 x 5/8 wood screws is provided on the cabinet side fastening interface, giving a straightforward screw-on attachment to standard cabinet materials.
• The plate is listed for hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, so the same mounting approach can be used across those Salice hinge families.

Mounting Plate Installation And Adjustment Workflow

This screw-on attachment plate fastens to the cabinet side through an open hole sized for #6 x 5/8 wood screws, so installers can use standard drilling patterns for that screw size. Once mounted, the Domi snap-on interface lets compatible Salice hinge arms clip to the plate, speeding hinge installation and removal during fitting. The two cam mechanism then provides on-plate height and depth adjustment, so door alignment can be corrected by turning cams rather than relocating screws. Because the plate height is 2mm, layouts that are planned around this dimension will maintain consistent reveals when the cams are used within their stated adjustment ranges.

Using This 2mm Salice Mounting Plate In Projects

Where This Die-Cast Steel Hinge Plate Fits

This hinge mounting plate is used on the cabinet side in concealed hinge applications that specify Salice hinges, so it establishes the fixed point that the hinge arm snaps onto. With compatibility spanning Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, it supports a wide range of door types that rely on those hinge bodies. The 2mm height means layouts expecting that offset can carry through across multiple cabinet openings, keeping the relationship between door edge and carcass consistent. The nickel-plated steel construction resists corrosion in typical cabinet interiors, so the adjustment features remain operable when cabinets are opened and closed over time.

Adjustment Range That Supports Precise Door Gaps

The plate uses a two cam adjustment design that gives cam height adjustment of plus or minus 2 mm, so an installer can shift the hinge mounting point up or down relative to the cabinet side without altering the screw positions. This helps correct small drilling tolerances or door sag by rotating the cam instead of redrilling holes. In addition, the cam depth adjustment range of -0.5 mm to +2.8 mm lets the door move closer to or farther from the cabinet, which is useful when matching door projection to adjacent cabinets or panels. Because these adjustments are built into the plate, they can be repeated across multiple hinge locations, supporting consistent reveals along tall doors or wide cabinet banks. The Domi snap-on interface further streamlines this process, as hinge arms can be detached and reattached during adjustments without disturbing the screw-on attachment of the plate itself.

Common Questions About This BAR3R26 Mounting Plate

Selecting This 2mm Salice Plate For Your Hinges

The Domi snap-on mounting plates with 2mm height, two cam height adjustment of plus or minus 2 mm, and depth adjustment from -0.5 mm to +2.8 mm provide a practical way to fine tune Salice hinge installations. With steel construction, nickel plating, screw-on attachment using #6 x 5/8 wood screws, and compatibility with Salice hinge series 100, 200, 400, F, M, Universal Hinges, and Silentia+, this BAR3R26 plate fits cabinet projects that rely on those hinge systems and require repeatable adjustment across multiple doors.