Plastic Round Wireless Micro Dimmer For 12VDC Lighting

Plastic Round Wireless Micro Dimmer is a single zone wireless dimmer designed for 12VDC lighting control. The 0-100% dim and On/Off switch function lets you move from full output down to low levels, which helps match light to task work or ambient needs. The dimmer works wirelessly through a Universal Receiver, so the control can sit where it is convenient while the receiver stays near the fixture wiring. The wireless design reduces surface wiring runs, which matters when working in finished cabinets or tight millwork spaces. The dimmer uses a long life lithium battery, Type CR-2025, so the control keeps operating over time without tying into a low-voltage power feed. The black plastic round housing keeps the control visually discreet, which supports clean-looking cabinet or display installations.

Key Wireless Dimmer Details That Support Daily Use

• The single zone wireless dimmer layout focuses control on one lighting zone, which keeps operation straightforward when a run of 12VDC fixtures needs consistent dimming from one point.
• The 0-100% dim and On/Off switch capability manages both switching and light level, which can reduce the number of separate controls needed on a cabinet or panel.
• The long life lithium battery design keeps the dimmer operating independently of the low-voltage circuit, which avoids adding extra wiring for control power during installation.
• The 65 ft range of control from dimmer to receiver allows flexible placement of the control away from the receiver, which is useful when receivers sit inside cabinets or inaccessible cavities.
• The mounting case can be mounted with screws or to a metallic surface, which supports both more permanent and repositionable mounting options during layout or future changes.
• A single dimmer can be programmed to up to 10 different receivers, which lets one control operate multiple lighting runs across a larger cabinet or room layout.
• A single receiver can be programmed to up to 8 different dimmers, which supports locating multiple controls for the same lighting zone in different work areas.

Mounting And Wireless Setup For Practical Installation

The dimmer uses a mounting case that can be mounted with screws or to a metallic surface, so it can be anchored firmly or positioned on steel cabinet parts or panels. This flexibility matters when planning access to the control around hinges, pulls, or other hardware. Wireless operation between the dimmer and Universal Receiver allows the receiver to sit with the 12VDC wiring while the dimmer sits in a more ergonomic spot, which can simplify wiring terminations. The 65 ft range of control from dimmer to receiver supports installations where the control and receiver are separated by room layouts or cabinet runs, while still keeping response reliable within that distance.

Using This Single Zone Wireless Dimmer In Real Projects

Where This 12VDC Wireless Dimmer Fits Best

This Tresco Lighting single zone wireless dimmer is suited to any 12VDC lighting run controlled through the required Universal Receiver, because the dimmer is designed around that receiver connection. The single zone wireless dimmer configuration focuses on one lighting zone, which works well for a bank of undercabinet lights, a shelving run, or a display section needing shared dimming. The 65 ft range of control from dimmer to receiver supports installations where receivers sit inside cabinets, bases, or overhead compartments while the dimmer is placed on a nearby panel, door stile, or metallic surface. The black plastic round form helps the dimmer blend into darker cabinet finishes or equipment faces, which can be useful in retail displays or workstations.

Control Flexibility That Reduces Rework And Callbacks

The 0-100% dim and On/Off switch design gives full brightness control and switching from one control, which simplifies user operation and reduces the chances of mis-wiring separate switches and dimmers. A single dimmer can be programmed to up to 10 different receivers, so one mounted control can drive several receiver-controlled 12VDC lighting zones, which is useful when adding more casework or display runs later without changing the control location. A single receiver can be programmed to up to 8 different dimmers, allowing more than one control point for the same lighting zone, which can cut down on walking between stations in longer cabinet lines or counters. The long life lithium battery, Type CR-2025, means the dimmer operates for extended periods without tying into the low-voltage wiring, which eliminates extra power conductors and reduces labor during installation and future adjustments.

Common Questions About This Wireless Micro Dimmer

Select This Dimmer For Focused 12VDC Zone Control

The Tresco Lighting Plastic Round Wireless Micro Dimmer, Black, provides single zone wireless dimming from 0-100% for 12VDC lighting through a Universal Receiver. The 65 ft range of control from dimmer to receiver, along with mounting case options using screws or attachment to a metallic surface, supports flexible placement around cabinets, displays, and work areas. Use its ability to program one dimmer to multiple receivers, or one receiver to multiple dimmers, to build out practical control points across your installation while keeping wiring centered at the receivers.