Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ADA floating vanity bracket is a white steel floating vanity support designed for ADA countertop installations with an ADA sink. The bracket works as a structural support that mounts to the wall and the countertop, so the ADA sink and top rest on the bracket instead of floor legs, which keeps the floor area open under the vanity for ADA access while still carrying the load back to the wall framing.
The product is an A and M Hardware, Inc. floating vanity bracket with a listed size of 22 x 1-1/2 x 21, described as ADA BRKT, WHITE NO HOLES, US MADE, 21IN. That size range gives fabricators and installers a defined footprint to design around when laying out wall blocking, sink cutouts, and front aprons on ADA-compliant vanity runs.
The bracket is part of the builders hardware category under ADA and vanity brackets, so it is intended as a dedicated support element in an ADA vanity assembly rather than a generic angle or corbel. The white finish helps the bracket blend behind light-colored tops and face boards on open ADA sink areas, which supports clean-looking installations in commercial or residential washrooms.
The ADA countertop installation workflow described for this floating vanity bracket is straightforward: the brackets mount to the wall and the countertop, and then the ADA sink sits on top of that supported surface. This mounting sequence lets the installer fasten the steel bracket into the wall structure before setting the countertop, so the top can be dropped into place onto a known support line rather than being balanced on temporary shims.
Because the ADA sink sits on top of the countertop that is resting on the bracket, the vertical load from the bowl, faucet, and user contact is transferred directly into the steel support and then into the wall. That arrangement keeps the space below the sink open, which is important in ADA layouts where knee and toe clearances under the vanity must remain unobstructed while still providing firm support for the countertop edge.
This floating vanity bracket is positioned as an ADA countertop installation solution for use with an ADA sink, so it fits best anywhere a wall-mounted vanity needs clear space underneath while still handling the countertop load. In commercial restrooms, the bracket can be used behind solid-surface or laminate tops where front aprons or face boards are applied, letting the structural work happen at the wall while the front remains visually clean.
The hardware is categorized specifically as an ADA and vanity bracket, which means it is intended to live behind or under a countertop rather than as exposed decorative support. That role suits health-care, education, office, and residential bath projects where meeting ADA guidelines and maintaining easy cleaning access under the sink are both priorities. Because the bracket works by tying the wall and countertop together, it can be used in new construction or remodel work where the framer or carpenter can provide backing in the wall for the bracket location.
The A and M Hardware, Inc. branding tells shops and installers that this is a dedicated builders hardware component rather than repurposed stock steel, which helps with specifying the same part repeatedly across multi-room or multi-floor ADA jobs. The defined 22 x 1-1/2 x 21 size and the US ADA BRACKET WHITE NO HOLES 21IN identifier also allow architects, millwork estimators, and installers to call out this exact bracket in schedules and shop drawings, keeping communication clear from design through installation.
The web description explains that the bracket works with spring clips to hold a face board on the front of the support, giving the installer a way to finish the exposed edge while hiding the structural hardware. Using spring clips means the face board can be removed with no tool, so service access under the top remains straightforward if plumbing or wiring behind the board must be reached later without cutting or damaging finish materials.
The description also notes that there is no visible hardware when the face board is attached using the spring clips, so the ADA sink area can present a continuous, clean front instead of showing structural steel or fastener heads. For fabricators and installers, that combination of hidden support and removable face board helps balance appearance with long-term access, because the countertop and ADA sink stay fully backed by steel while the front cladding can be released when maintenance work is required.
The white steel construction works well with this face board approach; when the face board is removed, the underlying bracket still presents a clean, light-colored surface around the ADA sink and countertop, which is useful in clinical or high-visibility environments where exposed structural parts should remain unobtrusive yet easy to see during inspections or servicing.
The floating vanity bracket is described for ADA countertop installations with an ADA sink, so it supports wall-mounted vanity tops where ADA-compliant under-sink clearance is required.
The ADA floating vanity support mounts to the wall and the countertop, and the ADA sink sits on top, so the load transfers through the bracket into the wall structure.
The product is listed as white steel 22 x 1-1/2 x 21, giving installers a footprint for coordinating bracket placement with studs, plumbing, and front aprons.
The bracket uses supplied spring clips to attach a face board to the support, allowing a clean finished front while keeping the face board removable without tools for access.
The bracket is described as white steel, so it provides a metal support structure with a white finish that blends behind typical bath and lab surfaces around ADA sinks.
The manufacturer part number US ADA BRACKET WHITE NO HOLES 21IN and SAP description ADA BRKT, WHITE NO HOLES, US MADE, 21IN identify this specific no-holes version for ordering and documentation.
This ADA floating vanity bracket from A and M Hardware, Inc. is described as a white steel floating vanity support sized at 22 x 1-1/2 x 21 for ADA countertop installations with an ADA sink. The design mounts to the wall and countertop so the sink sits on top, uses spring clips for a removable face board with no visible hardware, and carries the identifiers US ADA BRACKET WHITE NO HOLES 21IN and ADA BRKT, WHITE NO HOLES, US MADE, 21IN to match project specifications and ordering on ADA-compliant vanity work.
Sold In: 2 Each