
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Ascent LED linear lights with motion sensor give you a 12 volt DC low voltage fixture that mounts under furniture to throw light onto the floor, so you can light walkways or toe-kick areas without wiring full-size fixtures. The Tresco Lighting L-HACNT-CNI-1 draws only 1 watt while delivering 41 lumens, which provides useful floor-level illumination with minimal power load on a low voltage system. The 5000K color temperature produces a cool white light that helps define edges and obstacles on the floor in work or traffic areas. The nickel finish pairs with modern casework and furniture, so the fixture visually blends into underside surfaces. The plastic construction provides a lightweight housing, which simplifies handling during layout and mounting under cabinets, benches, or other furniture pieces.
This Tresco Lighting LED linear light operates on 12 volt DC low voltage, so it ties into Tresco transformers and low voltage power cables used in cabinet or furniture lighting layouts. The fixture ships with two angled mounting brackets at 90 degrees and 116 degrees, which lets you mount it so the beam is either straight down or slightly projected out toward the floor depending on the geometry of the cabinet base or furniture toe. The 79 inch wire lead extends the connection point back to a transformer or power junction, allowing you to position the light at the front edge of furniture while routing wiring discreetly to the rear or underside of the installation.
This 8.25 inch Tresco LED linear sensor light is designed for mounting to the bottom of furniture to throw light on the floor, so it fits naturally under cabinets, wardrobes, or similar casework where floor wash lighting is needed. The low 0.65 inch height and 0.80 inch width help it sit behind typical toe-kick overhangs or undersides without protruding into view, which supports clean, concealed installs along kitchen bases or hallway built-ins. With a 6.5 foot motion detection range and 110 degree sensor angle, the fixture can cover walk paths in front of a run of cabinets when placed near the center of the zone, which reduces dark spots between units. The 5000K cool white output defines flooring edges and transitions, which is useful in workrooms, utility spaces, and other areas where visual clarity at floor level supports safe movement. Because the light operates from a 12 volt DC low voltage supply, it works within cabinet lighting systems that already use Tresco transformers, power cables, connecting cables, and switches.
The integrated motion sensor built directly into this Ascent LED linear light removes separate sensor alignment steps, so once the fixture is aimed using the 90 degree or 116 degree brackets, both light and detection zones line up together. The adjustable time setting from 30 seconds to 5 minutes after motion has ceased lets you fine-tune how long the L-HACNT-CNI-1 stays on, which helps match behavior to the space, such as short timeouts for passage areas or longer times for task-adjacent floors. The 20 degree beam angle narrows the output, which increases floor brightness from the modest 41 lumens and reduces light spill onto vertical faces, supporting controlled floor washing rather than general ambient lighting. With eight LEDs arranged in the linear housing, the fixture spreads light more evenly across the 8.25 inch length, reducing hot spots directly below the center and giving a more continuous strip of illumination along the floor. The 20,000 hour usable life specification supports repeated on-off cycles from the motion sensor over long periods, which is important when the light is used in frequently traveled areas in residential or light commercial woodworking projects.
The Tresco L-HACNT-CNI-1 is a 12 volt DC low voltage LED linear light, which lets it connect into low voltage lighting layouts using compatible Tresco transformers and power cables.
The integrated motion sensor detects movement within 0 to 6.5 feet across a 110 degree angle, then keeps the light on for an adjustable 30 seconds to 5 minutes after motion stops.
This LED linear light delivers 41 lumens at 5000K with a 20 degree beam angle, focusing cool white light onto the floor for defined, directional floor washing under furniture.
The Ascent LED linear sensor light measures 8.25 inches in overall length, with a compact 0.80 inch width and 0.65 inch height for discreet mounting under cabinets or furniture.
This light uses two angled mounting brackets at 90 degrees and 116 degrees, which allows you to direct the beam straight down or slightly out onto the floor surface.
The LED sensor light has a 79 inch wire, giving flexibility to route the low voltage connection back to a transformer or connection point away from the cabinet front.
The Tresco Lighting Ascent LED linear sensor light L-HACNT-CNI-1 combines 12 volt DC operation, 1 watt draw, and a 5000K 41 lumen output to deliver focused floor illumination from a compact bar. The integrated motion sensor with 0 to 6.5 foot range and adjustable shutoff timing supports hands-free activation along cabinet or furniture bases. With its 8.25 inch length, 20 degree beam angle, nickel finish, and angled mounting brackets, it suits under-furniture runs where controlled, cool white floor lighting is part of the overall woodworking or cabinet layout.
Sold In: 1 Each