Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Timberline Wardrobe Lock Bar describes a CompX Timberline Wardrobe Lock part WB-480 that is designed for use on vertical wardrobe doors, so it gives you a dedicated locking solution for tall cabinet or wardrobe applications. The full 1/2 inch wardrobe bar throw moves the bar a substantial distance, which helps the bar engage solidly with the mating strike for a positive lockup on the door. The fact that this lock bar is part of the Wardrobe Locks product class keeps it aligned with common wardrobe and closet layouts, which supports consistent planning across multiple doors in the same project. The wardrobe bars are stocked in standard sizes as shown by the manufacturer, and they can be cut to size by the user, which lets you match bar length to different door heights within the same job.
This CompX Timberline Wardrobe Lock bar works with a 16.5 mm lock hole as the only machining required, so the main door prep focuses on drilling a single bore to accept the lock body. The center line of the lock must be a minimum of 1 inch from the edge of the door, which sets the offset you use when laying out the hole along the stile so the lock and bar align correctly. Wardrobe bar supports should be used every 18 inches, so longer bars on tall wardrobe doors gain consistent support points that help the bar stay aligned with the strike during operation.
The Timberline Wardrobe Lock Bar is for use on vertical wardrobe doors, so it suits full-height wardrobe cabinets, tall storage units, and similar vertical door layouts. Because wardrobe bars are stocked in standard sizes and can be cut to size by the user, a shop can keep standard lengths on hand and trim them to match each door height on a project. The full 1/2 inch wardrobe bar throw drives the bar deeper toward the strike location, which helps keep tall doors closed when users pull on handles positioned far from the locking point. Wardrobe bar supports should be used every 18 inches, so tall doors with long bar runs gain stable guidance points along the interior, which supports smooth engagement with the strike in normal daily use.
The requirement that the center line of the lock be a minimum of 1 inch from the edge of the door shapes how you plan stiles and rail widths, giving you a predictable reference dimension during layout. Having only a 16.5 mm lock hole as the required machining keeps routing and drilling steps focused on a single, repeatable operation, which can reduce setup changes between doors. The full 1/2 inch wardrobe bar throw gives the bar ample travel toward the strike, helping it compensate for minor variations in door fit that occur across a run of cabinets. Wardrobe bar supports every 18 inches hold the bar close to the door surface along its length, which helps the bar track cleanly each time the cylinder moves it. Because wardrobe bars are stocked in standard sizes yet can be cut to size by the user, installers can fine-tune bar length on site, trimming ends to clear obstructions while still maintaining the specified throw and support spacing.
The Timberline Wardrobe Lock Bar is for use on vertical wardrobe doors, so it suits tall wardrobe and storage cabinet doors that need a bar-style locking point.
The wardrobe lock bar provides a full 1/2 inch wardrobe bar throw, which drives the bar a substantial distance toward the strike for firm engagement.
The Wardrobe Lock Bar uses a 16.5 mm lock hole as the only machining required, so preparation focuses on drilling this bore to receive the lock body.
The wardrobe lock center line must be a minimum of 1 inch from the edge of the door, which establishes the offset when laying out the lock position.
Wardrobe bar supports should be used every 18 inches, which helps keep long bars straight and supported along tall wardrobe doors.
The wardrobe bars are stocked in standard sizes and can be cut to size by the user, so bar length can be trimmed to suit each door height.
The CompX Timberline Wardrobe Lock Bar WB-480 offers a full 1/2 inch wardrobe bar throw for use on vertical wardrobe doors, so it delivers a defined locking stroke for tall cabinet layouts. With a single 16.5 mm lock hole as the machining requirement and a center line minimum of 1 inch from the door edge, layout and drilling follow clear dimensions. Because wardrobe bars are stocked in standard sizes and can be cut to size by the user, one part number can adapt across multiple wardrobe door heights within the same project.
Sold In: 1 Each