Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Economy Keyboard Arm Standard Length, 5-1/2" - Knape And Vogt 6733M21 is a keyboard arm from the Knape and Vogt multimedia and workspace components line, giving installers a defined solution when a standard-length arm is needed under a work surface. The SAP description identifies this model as a 21-3/4' VALUE ARM, 5-1/2' NECK, so you are working with a value-focused arm that uses a 5-1/2 inch neck for consistent geometry between the track and the tray mounting point. As part of the keyboard arms category, it is designed to support a keyboard and tray in a movable position under desks or workstations, which helps set up more ergonomic typing positions in office, shop, or workstation environments where the arm needs to move smoothly during daily use.
The Web Description notes that KV6733M21 uses a 21-3/4 inch glide track, defining the track length that mounts under the work surface and guides the arm. This 21-3/4 inch glide track length gives the arm space to slide in and out under the desk, which matters when recessing the tray under the top between uses. The same description references KV6733M16 as a 17 inch glide track version, showing that 6733M21 is the longer track option for layouts where more slide travel is desired, such as deeper desks or where the tray needs to retract farther when not in use.
The Economy Keyboard Arm Standard Length, 5-1/2" - Knape And Vogt 6733M21 belongs to the multimedia and workspace components category, so it is positioned for desk and workstation installations where an adjustable keyboard position is part of the layout. The 21-3/4' VALUE ARM, 5-1/2' NECK description shows that it is sized as a standard-length arm, which fits common workstation depths where a full-size keyboard tray needs to slide under the front edge. Because the height range runs from 1.0 inch above the track to -5.0 inches below the track, the arm can serve both lower seated positions and slightly higher desk setups, supporting a range of user statures and work-surface heights. The 360 degree swivel at the track helps this model work in corner or straight runs where users may want to swing the tray aside, so it suits shared workstations and installations where access to drawers or cabinets near the front edge of the desk is important.
The 30 degree tilt range from +15 degrees to -15 degrees gives the installer and end user a broad adjustment window, so a neutral typing angle or a more aggressive negative tilt can be set to reduce wrist extension. The soft-touch knob providing simultaneous height and tilt adjustment means one control handles both variables, which speeds up dialing in the position during initial setup and later tweaks, supporting repeatable positioning after maintenance or workspace changes. With the spring-assisted design helping to counterbalance keyboard and tray weight, vertical repositioning can stay smoother even when a heavier tray style is mounted, which is useful in commercial environments where the arm will be adjusted repeatedly over the life of the installation. Combined with the 21-3/4 inch glide track identified as KV6733M21, the arm can travel further under the top, so users can retract the tray to a consistent stowed position when stepping away and then pull it back out to the same working position, reinforcing predictable ergonomics day after day.
The Economy Keyboard Arm Standard Length, 5-1/2" - Knape And Vogt 6733M21 adjusts from 1.0 inch above the track to 5.0 inches below it, supporting different desk heights and preferred typing levels.
The Knape and Vogt 6733M21 keyboard arm offers a 30 degree tilt range from +15 degrees to -15 degrees, allowing both positive and negative tray angles to better match user wrist posture.
The KV6733M21 version uses a 21-3/4 inch glide track, giving the keyboard tray extended in-and-out travel under the work surface for deeper desks or greater retraction.
The 6733M21 keyboard arm uses a soft-touch knob to adjust both height and tilt at once, letting users quickly refine their typing position without handling separate controls.
The Economy Keyboard Arm 6733M21 is spring-assisted to help counterbalance the keyboard and tray weight, so vertical adjustments feel lighter and motion remains more controlled.
The 360 degree swivel at the track lets the 6733M21 keyboard arm rotate fully, so the tray can be swung to the side to open up access to the main work surface.
The Economy Keyboard Arm Standard Length, 5-1/2" - Knape And Vogt 6733M21 brings together a 21-3/4 inch glide track, a 5-1/2 inch neck, defined height and tilt ranges, spring assistance, and 360 degree swivel at the track, giving installers a clear specification when planning adjustable keyboard positions. For projects where a standard-length arm with combined height and tilt control is required under a desk or workstation, this Knape and Vogt keyboard arm provides the specific adjustment ranges that support practical, repeatable keyboard placement in daily use.
Sold In: 1 Each