Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Encore arm with keyboard clamp tray gives a 5-1/2 inch neck keyboard arm that supports ergonomic positioning in a compact workspace, which helps installers set up comfortable workstations in tight desk layouts. The Knape and Vogt 5535D17 design combines a low profile keyboard arm and a built-in keyboard clamp, so the tray stays closer to the underside of the work surface while holding the keyboard securely for daily use. Powder coated steel construction provides a rigid support structure in this keyboard arm, which matters when the tray is adjusted frequently during the workday. The 17 inch glide track length defines how far the arm can move in and out from the mounting point, which helps align the keyboard position with the user and the desk edge. Spring assisted action counterbalances keyboard weight on the arm, so vertical adjustments feel smoother for the end user during setup and ongoing use.
The 17 inch glide track on this Knape and Vogt 5535D17 arm defines a straight sliding path, which helps installers position the track so the keyboard tray travels fully beneath the desk when retracted. The 5-1/2 inch neck dimension describes the vertical structure between the track and tray, which affects the drop distance from the mounting surface to the keyboard and helps align with typical chair heights. Spring assisted counterbalance in the arm supports the keyboard weight during movement, which reduces effort when users tilt or reposition the tray throughout the day. The star wheel adjustment knob on this ergonomic keyboard arm concentrates tilt control in one place, so angle changes can be made quickly without separate levers and without disrupting the glide movement on the track.
The Knape and Vogt 5535D17 Encore arm with keyboard clamp tray is positioned as an economical ergonomic keyboard solution, which fits projects that need adjustability without premium cost. The low profile design keeps the tray closer to the underside of the work surface, which works well in office workstations or commercial desks where knee space is limited. A 5-1/2 inch neck bridges the 17 inch glide track and the tray, which helps place the keyboard at a usable height under common desktop thicknesses while keeping the arm discreet. The 360 degree swivel capability lets the arm rotate fully around its pivot, which matters when users need to swing the keyboard aside during non-typing tasks or share the workspace briefly.
The Encore low profile keyboard arm with tilt uses a star wheel adjustment knob to control tray angle, and the 33 degrees of total tray tilt, from plus 16 degrees to minus 17 degrees, gives a defined adjustment range that supports neutral wrist positioning for different users. This tilt range allows installers to set a slight positive or negative angle depending on user preference, which can reduce strain over long sessions at the keyboard. Spring assisted operation counterbalances the keyboard weight during motion, so once the preferred height and tilt are found, users can move through the range smoothly without abrupt drops. The powder coated steel construction stabilizes these moving joints, which helps keep the swivel, glide, and tilt functions working consistently over repeated adjustments in daily use.
The Knape and Vogt 5535D17 keyboard arm provides an economical ergonomic keyboard solution with tilt, swivel, and glide adjustment, which helps position the keyboard for comfort under a desk or workstation.
The Encore keyboard arm uses a 17 inch glide track, which lets the tray move in and out relative to the mounting point so the keyboard can retract under the work surface when not in use.
The 5-1/2 inch neck sets the vertical distance between the track and tray, which helps place the keyboard at a practical height below the desktop in typical seated workstations.
The Encore arm provides 33 degrees of total tray tilt, from plus 16 degrees to minus 17 degrees, which allows users to set positive or negative angles to support comfortable wrist positions.
The Knape and Vogt 5535D17 arm uses a star wheel adjustment knob for tray angle, which gives a single, easy-to-locate control point for changing tilt without extra tools.
The spring assisted design counterbalances the keyboard weight, which makes moving the tray through its range smoother for users and supports frequent adjustments during daily work.
The Encore arm with keyboard clamp tray from Knape and Vogt combines a low profile design, 17 inch glide track, and 5-1/2 inch neck into an economical ergonomic keyboard arm, which suits office and workstation projects where adjustability and space efficiency both matter. By using powder coated steel construction with 360 degree swivel and a star wheel adjustment knob controlling 33 degrees of tray tilt, this spring assisted keyboard arm supports repeatable keyboard positioning for different users. Choose this 5535D17 model when a defined tilt range, compact structure, and smooth in-and-out glide are important to the overall workstation layout.
Sold In: 1 Each
