Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Xtend Monitor Arm single screen is a Knape and Vogt monitor arm that provides 26 inches of reach, so a single monitor can be pulled forward for detailed work or pushed back to clear space on the work surface. The arm offers 13 inches of usable height adjustment, allowing the screen to be set higher or lower so users can work at a more comfortable viewing level during long tasks. A visually appealing pole-less monitor arm design folds into a 4-3/8 inch area, which helps free up desk depth in smaller work environments where space is tight. Counterbalanced spring technology supports a 2 to 20 pound load maximum, so a range of monitor weights can be positioned without sagging once set. The arm swivels, which lets the screen be angled toward different seating positions without moving the base.
Tool-less clamp installation on this Xtend Monitor Arm relies on a clamping mechanism instead of separate fasteners, allowing the arm to be secured to a suitable work surface with less on-site preparation. The standard clamping range of 0 to 2-5/8 inches is engineered to attach to many common desk and table thicknesses, which simplifies planning when several workstations use different tops within that range. Counterbalanced spring technology is designed to match monitor weight between 2 and 20 pounds, so once the counterbalance is set a user can move the screen without constant tightening. The arm provides 13 inches of usable height adjustment, allowing installers to position monitors for sitting or standing arrangements within the available travel.
The Xtend Monitor Arm - Knape and Vogt 7818SJ02 fits single-screen workstation layouts that benefit from the 26 inches of reach, allowing monitors to be pulled close for focused tasks or pushed away for reference use. A visually appealing pole-less monitor arm that folds into a 4-3/8 inch area helps in compact offices where every inch of depth matters, giving more open desk surface in front of the user. The clamping range of 0 to 2-5/8 inches lets this arm mount to many standard work surfaces, supporting consistent hardware across different desk models that share similar thicknesses. Counterbalanced spring technology with a 2 to 20 pound load maximum serves installations where monitor weights vary within that range, so different screens can be used while staying within the armâs supported capacity.
The 26 inches of reach on this monitor arm give installers flexibility to position the base toward the rear or side of a desk, then swing the display into the userâs preferred line of sight without relocating the clamp. Thirteen inches of usable height adjustment allow the screen to be shifted up or down along its travel, helping align the monitor with eye level for various user heights and seating styles. Counterbalanced spring technology supports a 2 to 20 pound load, so once the weight setting is dialed in with the simple Allen wrench adjustment, the monitor can be raised or lowered with consistent resistance. The enclosed cable management system routes cords inside the arm, so frequent repositioning does not leave cables hanging or tangled across the work surface. A visually appealing pole-less monitor arm that folds into a 4-3/8 inch area lets users push the screen back when extra desk depth is needed for paperwork or other equipment during the day.
The Xtend Monitor Arm uses counterbalanced spring technology that supports a 2 to 20 pound load maximum, so monitors within that range can be positioned and held without drooping.
The Xtend Monitor Arm provides 26 inches of reach, allowing the monitor to be brought closer to the user or pushed back toward the rear of the work surface as tasks change.
The monitor arm offers 13 inches of usable height adjustment, which helps position the screen higher or lower to match different user heights and seated or standing positions.
The arm has a clamping range of 0 to 2-5/8 inches, so it mounts to work surfaces within that thickness range commonly found on desks and tables.
The enclosed cable management system hides cables along the arm, keeping cords organized and out of the way when the monitor is moved or rotated during use.
The visually appealing pole-less design folds into a 4-3/8 inch area, freeing desk depth so smaller work environments retain more usable surface in front of the user.
The Xtend Monitor Arm - Knape and Vogt 7818SJ02 combines 26 inches of reach, 13 inches of usable height adjustment, and a standard 0 to 2-5/8 inch clamping range, aligning well with many desk-based workstations. Counterbalanced spring technology designed for 2 to 20 pound loads supports a range of monitor sizes used in offices and technical environments. When a visually appealing pole-less monitor arm that folds into a 4-3/8 inch area is important to protect desk space and maintain a clean look, this single-screen Xtend solution from Wurth Baer Supply offers a focused mounting option.
Sold In: 1 Each
