Xtend Dual Monitor Arm For Dual Screens

Xtend Dual Monitor Arm is a Knape and Vogt dual-screen monitor arm designed to support two displays on a short mounting pole. The arm provides 26 inches of reach, which lets you pull both screens into a comfortable working position across a typical desk depth without crowding the user. It offers 13 inches of usable height adjustment, so screens can be raised or lowered to better match sitting ergonomics across different users at the same workstation. The short mounting pole allows the monitor arm to fold into a 4-3/8 inch work area, helping the screens sit closer to panels or walls when pushed back. A counterbalanced load rating of 2 to 14 pounds per arm supports many common flat-panel monitors within that weight range. Standard VESA hole patterns keep mounting aligned to widely used monitor back plates.

Key Monitor Arm Details That Support Workflow

• The arm provides 26 inches of reach, which lets screens extend across a broad section of the desk so users can pull displays closer when focusing on detailed tasks or push them back when more open space is needed.
• Usable height adjustment of 13 inches allows vertical repositioning of each arm, which helps adapt screen height to different users or seating setups while maintaining a more neutral viewing position during longer sessions.
• The short mounting pole allows the monitor arm to fold into a 4-3/8 inch work area, so the dual screens can sit nearer to panel systems or wall surfaces when retracted, reducing the footprint in tighter workstations.
• Tool-less clamp installation makes assembly quick and easy, which reduces install time on site and allows the arm to be mounted or relocated on compatible work surfaces without separate tools for the clamping action.
• A simple, easy-to-use Allen wrench adjustment counterbalances the weight of screens, so the arm tension can be tuned to the specified load range and monitors can hold position without drifting during everyday repositioning.
• The counterbalanced load rating of 2 to 14 pounds per arm defines an operating window that helps match the arm to monitors within that weight range, supporting stable positioning when the arms are adjusted.

Clamp And Grommet Mount Arm Setup Details

This Knape and Vogt monitor arm uses a tool-less clamp installation, so the primary desk attachment is secured by a hand-operated clamp mechanism. The clamping range of 0 inches to 2-5/8 inches specifies the thickness of work surfaces that can be gripped by the clamp, which suits many standard desk and table tops in that dimension range. The arm is also described as having both clamp and grommet mount standard, meaning it can be mounted through a suitable grommet opening as an alternative method. This dual mounting approach supports different workstation layouts where edge clamping or through-desk mounting is preferred. Once the base is positioned within the specified clamping range or grommet opening, the arm can be set to provide the stated reach and height adjustment for both screens.

Using This Dual Monitor Arm In Real Workstations

Where This Xtend Dual Monitor Arm Works Best

This XTEND MONITOR ARM DUAL SCREEN model is part of the monitor arms product class from Knape and Vogt, used for organizing multimedia and workspace components. The dual monitor arm dual screens configuration supports two displays from a single mounting pole, which fits desks where space efficiency and screen alignment are important. With a reach of 26 inches, the arms can position screens side by side while still allowing them to be pulled closer for focused work. The 13 inches of usable height adjustment makes it suitable for shared workstations where different users sit at the same desk and benefit from changing screen height. Its clamp and grommet mount standard design matches work environments that might require edge mounting on a desk or through-hole mounting on benching and tables.

Why These Adjustment Details Support Repeatable Positioning

The counterbalanced load rating of 2 to 14 pounds per arm means each arm is engineered to balance monitors within that weight window, which supports smoother repositioning without sagging when the tension is set using the simple Allen wrench adjustment. Standard VESA 2-5/16 inch by 2-5/16 inch and 3-15/16 inch by 3-15/16 inch hole patterns provide defined mounting points on the monitor back, helping installers align screens consistently with the arm brackets across many display models using those patterns. The short mounting pole, which allows folding into a 4-3/8 inch work area, also supports repeatable parking of the screens in a compact position when the workstation must be cleared. Cable management on the arm hides the cables, guiding them along the structure so wiring stays closer to the arm instead of draping loosely, which can reduce cable interference when arms are moved. Together these elements help installers set a predictable range of motion and appearance across multiple workstations using the same XTEND MONITOR ARM DUAL SCREEN configuration.

Common Questions About The Xtend Monitor Arm

Selecting This Dual Monitor Arm For Your Setup

The Xtend Dual Monitor Arm from Knape and Vogt combines a 26 inch reach, 13 inch usable height adjustment, and a short mounting pole that folds into a 4-3/8 inch work area, making it suited to tighter desks and panel systems. Its tool-less clamp installation with a 0 inch to 2-5/8 inch clamping range, plus clamp and grommet mount standard, supports common work surface layouts. With a counterbalanced load rating of 2 to 14 pounds per arm and standard VESA mounting hole patterns, this XTEND MONITOR ARM DUAL SCREEN model is positioned for projects where dual monitors and cleaner cable management are part of the workspace plan.