Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Presto Monitor Trim-Lift is a Knape and Vogt monitor arm designed to support any size monitor up to 14 lb, so it handles a wide range of flat screens in shop, office, or workstation layouts where weight is the key constraint. The arm uses a simple Push to Open, Push to Lock feature that positively locks the monitor in the stored position, which helps keep screens secure when folded away in tight cabinetry or shared work areas. A fixed mounting plate with multiple hole mounting configuration offers ample attachment points, giving installers flexibility when fastening the arm to cabinets, panels, or structural members. Six VESA mounting positions accept 2-15/16 x 2-15/16 and 3-15/16 x 3-15/16 screen mounting patterns, so common small and midsize displays can be fastened directly without adapters in typical woodworking or fixture builds.
The Presto Monitor Trim-Lift uses a fixed mounting plate with multiple hole mounting configuration, so installers can choose attachment points that align with existing cabinet rails, gables, or metal structures while still keeping the arm square to the opening. The arm is designed for monitors from 9 to 14 lb using (5) 1 lb. weights to counterbalance, allowing the lift to be tuned so the monitor moves smoothly rather than drifting or sagging under load. An optional counterweight kit with three 2 lb. weights (KV9801A) expands the balancing range, which helps when pairing the arm with heavier screens within the intended counterbalance setup. An optional top cover L bracket with slotted holes (KV9801B) offers adjustment after mounting, making it easier to fine-tune monitor alignment relative to trim or face frames.
The Knape and Vogt 9810D2600 monitor arm is part of a multimedia and workspace components line, placing it naturally in cabinets, kiosks, and workstations where monitors need to stow when not in use. Its any size monitor up to 14 lb capacity suits smaller office or shop displays that are often built into overheads or wall units. Six VESA mounting positions for 2-15/16 x 2-15/16 and 3-15/16 x 3-15/16 patterns make it a fit for screens that follow these standardized bolt layouts, allowing straightforward attachment to the monitor chassis. The optional universal swivel adaptor KV9805C adds tilt, swivel, and rotation, so the same arm can serve both fixed-front installations and applications needing more articulation for shared desks or collaboration stations.
The Presto Monitor Trim-Lift uses a Push to Open, Push to Lock mechanism that locks positively in the stored position, giving installers a defined stowed state that is consistent from unit to unit. This consistency helps when aligning multiple cabinets in a run, because each monitor tucks away to the same reference position behind doors or trim. The fixed mounting plate with multiple hole mounting configuration supports repeatable layouts by offering common fastening locations, making it easier to standardize hole patterns across projects or production runs. The counterbalance design, using (5) 1 lb. weights for monitors from 9 to 14 lb, lets the installer dial in lift effort so that users experience a similar feel, even if different monitors are used within that weight range. When heavier balancing is needed, the optional KV9801A counterweight kit with three 2 lb. weights extends the tuning capability, supporting consistent motion where monitors push the upper end of the counterbalance range. The optional top cover L bracket KV9801B features slotted holes for adjustment, which allows fine positioning of the cover relative to surrounding cabinetry so reveals and edges can be aligned consistently across multiple installs.
Presto Monitor Trim-Lift supports any size monitor up to 14 lb, so as long as the screen weight is within that limit it can be matched to the arm and counterbalance system.
The Knape and Vogt 9810D2600 arm accepts VESA 2-15/16 x 2-15/16 and 3-15/16 x 3-15/16 patterns, allowing direct bolting to monitors drilled to those mounting standards.
The Push to Open, Push to Lock feature on the Presto Monitor Trim-Lift gives a positive locking stored position, helping the monitor stay secured when folded away in cabinets or workstations.
The Presto monitor arm uses (5) 1 lb. weights to counterbalance monitors from 9 to 14 lbs, which lets installers tune lift performance so the monitor moves smoothly within that range.
The KV9805C universal swivel adaptor adds screen tilt, swivel, and rotation to the Presto Monitor Trim-Lift, giving users more control over viewing angle once the arm is mounted.
The KV9801A counterweight kit with three 2 lb. weights extends balancing options, while the KV9801B top cover L bracket with slotted holes supports post-mount alignment to surrounding trim.
The Presto Monitor Trim-Lift - Knape And Vogt 9810D2600 gives installers a defined solution for supporting any size monitor up to 14 lb with standardized VESA mounting patterns. Its Push to Open, Push to Lock function, multiple hole mounting configuration, and adjustable counterbalance weights translate into predictable performance in cabinets, workstations, and multimedia furniture. Optional components KV9805C, KV9801A, and KV9801B extend articulation, counterweight range, and trim alignment, letting the same core arm serve varied layouts. For projects calling for a compact, weight-rated monitor arm from Knape and Vogt, this Presto monitor arm provides the detail set needed to plan, mount, and align screens around a 14 lb capacity.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV9805C Mfr# 9805C | Optional Universal Swivel Adaptor Monitor Mount - Knape And Vogt 9805C |
