Doellken Woodtape edge banding in the 8142AA Autumn Leaves color is a PVC edge banding designed to finish and protect exposed panel edges that use the Tafisa L542 Autumn Leaves Alto surface. The 3mm thickness provides a substantial edge profile that covers raw board edges cleanly, which helps create a solid-looking front on casework or shelving. The 15/16 inch width matches common panel thickness with a small trimming margin, giving fabricators room to flush-trim without exposing the core. This edge banding is specified as a color match to Tafisa L542 Autumn Leaves Alto, so the finished edge visually ties into that panel design on doors, drawer fronts, and carcass edges. The 8142PAA-1503-1 part number identifies this exact combination of color, thickness, and width, which simplifies reordering for repeat jobs and consistent shop standards.
This Autumn Leaves edgebanding is specified at 3mm thick, giving a deeper edge than thin tape and helping create a solid visual transition between the panel face and edge. The 15/16 inch width is dimensioned for standard panel builds that need a slight overhang for trimming, so edges can be processed to a flush, square finish without risking core exposure. As PVC edge banding, it works within setups tuned for PVC material characteristics, allowing operators to align feed speeds and trimming tools to that material type for consistent results on production or one-off runs.
The 8142AA Autumn Leaves edge banding is defined as a color match to Tafisa L542 Autumn Leaves Alto, so it aligns visually with panels built in that specific Tafisa decor. On jobs using Tafisa L542 Autumn Leaves Alto, the color-matched edge banding lets shops carry the same design from the flat surfaces through the vertical edges, which helps casework, doors, and drawer fronts read as one coordinated unit. Because it is a 3mm thick banding, it suits applications where a more substantial edge detail is desired, such as cabinet fronts, shelving, or work surfaces that benefit from a stronger-looking perimeter. The 15/16 inch width supports typical panel constructions that target a near-1-inch face, making this banding appropriate wherever those panel sizes are used with the Autumn Leaves Alto surface.
The combination of 3mm thickness and 15/16 inch width in this PVC edgebanding gives fabricators predictable trimming latitude around standard panel thicknesses, which supports consistent machine settings across similar runs. The extra width beyond nominal panel size allows edgebanders and trimming tools to remove slight overhang while still keeping full decorative coverage, which reduces rework on exposed edges. The clearly identified Autumn Leaves 8142AA color and the 8142PAA-1503-1 part number let shops specify the same material across projects, which helps keep edge appearance uniform when panels are replaced or added later. Being a PVC edge banding also ties directly into common shop processes for PVC, so operators can rely on established tooling, heat settings, and feed strategies tailored to this material type.
This Autumn Leaves edge banding is specified as a color match to Tafisa L542 Autumn Leaves Alto, so it visually aligns with that decorative panel surface on edges.
This edge banding is 3mm thick and 15/16 inch wide, providing a substantial profile with trim allowance for flush, clean edges on typical panel constructions.
The 8142AA Autumn Leaves product is PVC edgebanding, which aligns with shop setups and processing parameters used for PVC materials on edgebanders.
The 8142PAA-1503-1 manufacturer part number uniquely identifies this color, thickness, and width, which supports straightforward reordering and inventory tracking.
The 3mm thickness builds a deeper edge profile over Tafisa L542 Autumn Leaves Alto panels, providing a solid-looking perimeter on cabinet fronts and shelving.
The 15/16 inch width offers overhang beyond the panel face, so trimming operations can produce flush edges while keeping the PVC decor fully over the core.
Choose this Doellken Woodtape edge banding when a Tafisa L542 Autumn Leaves Alto surface needs matching PVC edges in a 3mm by 15/16 inch format. The defined color match, material type, and part number 8142PAA-1503-1 align with panel work that uses this decor and call for a consistent, substantial edge profile.