Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Tenso P-14 preload clip is a self-clamping connecting fitting that aligns, clamps, and connects work pieces in one system, so installers can handle joint assembly as a single, streamlined operation. The connector delivers a very high level of clamping force, allowing work pieces to be glued without screw clamps or external pressure, which keeps the work area clearer and reduces clamp setup time. Based on the Lamello P-System profile groove, the connector anchors strongly in the work piece in just seconds without tools, supporting faster production and consistent positioning. This two-part concealed connector supports a new connection process in interior fitting, so joints stay hidden while assembly stays efficient. Although it offers excellent tightening force, this version serves as a gluing aid, so users can focus on applying adhesive and bringing parts together without managing extra clamping equipment.
The Lamello Tenso P-14 connector works with the P-System profile groove, so once the groove is prepared, the fitting anchors into the work piece in seconds without tools, which supports quick, repeatable installations. Because this version is intended as a gluing aid, the high clamping force is directed into holding parts together during adhesive curing rather than acting as a removable fastener, which influences how installers plan joint access. The option to pre-load the connector before glue application allows all angles and miters to be assembled with less effort at final closure, which is useful when multiple joints must be engaged at the same time. By individually pre-loading the joining elements, the pulling force needed to close the joint is considerably reduced, so installers can bring components together with controlled pressure at the work area.
The self-clamping connecting fitting Tenso P-14 is designed for interior fitting, where alignment, clamping, and connecting must work together across multiple joints. Its three functions let the connector position work pieces, apply clamping pressure, and hold the connection, so a single part supports several steps in the build sequence. Because the connector delivers a very high level of clamping force, it can hold glued work pieces without screw clamps or external pressure, which simplifies setups on assembled elements. The concealed, two-part construction keeps the connection out of sight inside the joint, which is important in interior fitting where visible hardware is often avoided. Based on the innovative P-System profile groove from Lamello, the connector creates strong anchorage in the work piece in seconds, so it fits into production processes that depend on short cycle times and repeatable groove geometry.
The P-System profile groove used by the Tenso P-14 lets the connector anchor firmly in the work piece in just seconds without tools, which reduces handling steps at assembly stations. This anchorage allows the connector to deliver its very high clamping force directly into the joint, so glued parts remain under pressure during curing without additional clamp hardware. The version described functions as a gluing aid, meaning its tightening force is focused on holding components together after adhesive is applied, which supports clean, stable joints in interior fitting. The additional option to pre-load the connector before glue application extends its use to all angles and miters, so installers can prepare each joining element first and then close the joint with less resistance. When each joining element is individually pre-loaded, the amount of force required to connect the work pieces is considerably reduced, allowing multiple joints to be brought together with more controlled effort. This approach supports flexibility, speed, and simplicity throughout design, production, transport, and assembly, because the same connection method can handle a range of interior fitting geometries.
The Tenso P-14 preload clip is a self-clamping connecting fitting with three functions - alignment, clamping, and connecting - so one part handles multiple joint tasks in interior fitting.
The Tenso P-14 preload clip delivers very high clamping force, allowing glued work pieces to be held without screw clamps or pressure, which simplifies setups during adhesive curing.
The Tenso P-14 preload clip uses Lamello's P-System profile groove to anchor strongly in the work piece in seconds without tools, supporting quick, repeatable assembly operations.
The Tenso P-14 preload clip version is intended for use as a gluing aid, so its tightening force is directed at holding adhesive joints while they cure in interior fitting applications.
Pre-loading the Tenso P-14 preload clip before glue application allows use at all angles and miters, reducing closing force and easing complex multi-joint assemblies.
The Tenso P-14 preload clip allows individual pre-loading of joining elements, which considerably reduces the force needed to connect work pieces, aiding controlled joint closure.
The Tenso P-14 preload clip by Lamello provides a self-clamping connecting fitting that aligns, clamps, and connects work pieces specifically for interior fitting workflows. Its very high clamping force supports glue joints without screw clamps, helping projects move from assembly to curing without extra hardware moves. The P-System profile groove anchorage locks the connector into the work piece in seconds, fitting well into production environments that value speed and repeatability. With the option to pre-load each joining element, the connector supports angles and miters while reducing the closing force at final assembly. For installers and fabricators seeking a concealed, two-part gluing aid that fits the Lamello P-System profile groove, the Tenso P-14 preload clip offers a connection method focused on flexibility, speed, and simplicity.
Sold In: 1 Box