Festool Saphir 5 inch sanding disc is an abrasive disc designed for aggressive stock removal and heavy stripping jobs of hard, stubborn, and thick coatings, so it tackles demanding surface prep where fast material removal is required. The 24 grit abrasive cuts coarsely, which speeds leveling and stripping tasks before finer sanding stages. The disc uses a 5 inch diameter, fitting tools that accept this common size for broad, even contact on the work surface. A hook and loop backing lets the disc attach to compatible pads quickly, supporting rapid changes between grits on repetitive jobs. The 9-hole pattern in the disc works with matching pads that use this layout, allowing dust extraction through the holes to help maintain cutting performance as the abrasive loads.
The hook and loop backing on this Saphir disc connects to compatible hook and loop sanding pads, so discs can be pressed onto the pad face and pulled off without tools when changing grits or replacing worn abrasives. The 5 inch diameter and 9-hole layout are matched to pads using this size and hole pattern, helping align the disc so dust extraction ports stay open during sanding. The semi-closed coated surface distributes the aluminum oxide grains with some spacing, supporting dust flow off the face while still offering strong contact, which matters when running long passes on heavy stripping jobs.
This Saphir abrasive disc is specified for heavy duty sanding of wood, paint, plastics, fiberglass, composites, concrete, and steel, so one disc type can serve across multiple substrates in a shop or on site. Aggressive stock removal performance is suited to leveling rough lumber or shaping edges before finer grits are used. The description notes that it is ideal for heavy stripping jobs of hard, stubborn, and thick coatings, so it addresses tasks such as removing tough paints or finishes from surfaces that resist lighter abrasives. On materials like concrete and steel, the durable aluminum oxide grain works with the tear-resistant fabric backing to handle demanding contact where lesser discs would wear quickly.
The aluminum oxide abrasive, synthetic resin bond, and semi-closed coated design work together to keep the cutting surface stable under load, which matters when running extended sanding passes on heavy jobs. The semi-closed coating balances grain coverage and spacing, so the disc maintains contact while leaving paths for dust to move, helping preserve cutting efficiency as surfaces shed material. Tear-resistant fabric backing adds strength behind the paper-supported layer, supporting the disc when higher pressure or edge contact is applied during aggressive removal. Because the disc is sold in full box quantities only, it supports workflows that consume abrasives regularly, such as repetitive stripping or stock removal operations that benefit from having matching discs ready for continuous use.
This Saphir disc uses aluminum oxide abrasive with a synthetic resin bond and semi-closed coating, which supports aggressive cutting while maintaining a stable grain layer during demanding sanding.
The 24 grit rating provides a very coarse cut, making this disc suitable for aggressive stock removal and stripping thick, stubborn coatings before progressing to finer grits.
This Saphir disc combines a tear-resistant fabric backing with a paper-backed abrasive layer, giving added strength for extreme applications and supporting heavy-duty sanding pressures.
The disc is described as ideal for heavy duty sanding of wood, paint, plastics, fiberglass, composites, concrete, and steel, covering a wide range of shop and site materials.
The 9 hole hook and loop design lets the disc mount on matching pads and channels dust through the holes, helping maintain abrasive performance during extended sanding.
This disc is described for aggressive stock removal and heavy stripping of hard, stubborn, thick coatings, so its coarse grit and durable backing handle demanding coating removal.
This Saphir 5 inch, 24 grit, 9-hole hook and loop disc from Festool is positioned for aggressive stock removal and heavy stripping of hard, stubborn, thick coatings, giving tradespeople a focused option for demanding prep work. Its aluminum oxide abrasive with synthetic resin bond and semi-closed coating is specified for heavy duty sanding of wood, paint, plastics, fiberglass, composites, concrete, and steel, so it serves across many substrates. Sold in full box quantities only, it supports ongoing operations that rely on consistent abrasive performance for repetitive stripping and leveling tasks.
Sold In: 1 Box