Festool Granat 5 inch 80 grit sanding disc is a hardened aluminum oxide abrasive on a paper backed disc designed for hook and loop sanding. The 80 grit cut levels surfaces aggressively, which helps bring bare wood, paints, and coatings down to a uniform profile quickly. The hook and loop backing lets the disc attach and remove from compatible pads repeatedly, which supports fast abrasive changes during multi-step sanding jobs. The disc diameter of 5 inches matches common 5 inch sanders, so the abrasive face covers a typical small panel or component efficiently on each pass. The paper backed construction keeps the disc flexible while it is held flat by the sander pad, which allows sanding across both broad faces and modest contours without the abrasive folding or bunching under the pad.
This 5 inch disc uses a hook and loop connection, which allows the abrasive to press onto a matching pad and release without tools during changeover. That attachment style keeps the disc flat against the pad while sanding, which helps the 80 grit surface cut evenly without wandering edges. The 5 inch size fits sanders built around a 5 inch pad, so the disc face aligns with the pad diameter for full contact. The disc is described as having 9 holes, which provides a pattern for dust extraction across the sanding face during use. When the hole pattern lines up with the sander pad, dust can pull through the disc, which helps keep the cutting surface clearer and supports more consistent abrasion over the work session.
This Granat disc is well suited for bare wood, which means the 80 grit cut can break down milling marks and rough stock as a first sanding step. The same disc is also well suited for paints and most modern paint systems, which lets a finisher scuff or level coating layers before recoating. Being well suited for VOC clear coats allows the abrasive to key into these specific finishes without being described as limited to just traditional solvent coatings. Suitability for plastic materials and acrylics means the abrasive system is configured to work against those substrates, so shop fixtures, trim pieces, or fabricated parts in those materials can be sanded with the same disc. The disc is also well suited for solid surface materials and composites, which supports sanding or shaping solid surface tops, panels, and composite assemblies where controlled material removal is required.
The hardened aluminum oxide grain is specified for Granat, which provides a tough cutting surface that stands up to extended sanding across wood fibers, coatings, and synthetic materials. A synthetic resin bond is used in the disc construction, which ties the grains to the backing in a way that resists early grain loss while still exposing fresh cutting points as the surface wears. The closed coated grain layout covers nearly the entire face with abrasive, which produces a tight scratch pattern useful when leveling clear coats or achieving a uniform surface for subsequent grits. The paper backed base holds the abrasive system together while remaining flexible under the pad, which allows the 5 inch disc to follow moderate surface variations without digging isolated points into the work. This combination of hardened aluminum oxide, synthetic resin bond, and closed coated grain density works together so the 80 grit disc can deliver steady material removal and a predictable scratch profile on the listed materials.
The 80 grit rating on this Festool Granat disc creates a relatively coarse cut, which is suited to initial leveling of bare wood, paints, and other listed materials before moving to finer grits.
The 5 inch diameter matches common sander pad sizes, which lets the abrasive cover a typical small panel or part width with each pass, improving coverage on cabinetry and component work.
The 9 hole layout provides openings for dust extraction through the disc, which helps keep the abrasive surface cleaner and supports consistent cutting across the sanding area.
The Festool 497167 disc uses hardened aluminum oxide grain, which offers a tough cutting surface that maintains performance across wood, coatings, and the other listed materials.
The closed coated design covers almost the entire surface with abrasive, which produces a dense scratch pattern useful for leveling paints and clear coats before progressing to finer grits.
This Granat abrasive disc is well suited for bare wood, paints, most modern paint systems, VOC clear coats, plastic materials, solid surface materials, acrylics, and composites.
This Granat 5 inch P080 disc combines hook and loop backing, a 9 hole pattern, hardened aluminum oxide grain, and a synthetic resin, closed coated construction that is well suited to the listed materials. That mix lets a shop or installer use one abrasive type across bare wood preparation, coating leveling, and work on plastics, acrylics, solid surface materials, and composites. For buyers needing a consistent 80 grit step within that range of substrates, this Festool Granat disc offers a defined cut, predictable scratch pattern, and a workflow built around hook and loop disc changes and dust extraction through the 9 hole layout.
Sold In: 1 Box