Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Davenport cabinet pull BP36607G10 is a 6-5/16 inch, or 160 mm center-to-center handle designed as decorative cabinet hardware. That 160 mm bore spacing sets clear drilling layout for doors or drawer fronts, supporting consistent handle alignment across a run of cabinets. The pull is part of the Davenport collection, so its profile and proportions match other pieces in the same family for projects that need a unified look. Simple lines paired with bold curves create the distinct Davenport shape, giving cabinets a modern industrial character that reads clean but not overly sharp. Satin nickel finish on this pull uses delicate brushing to soften reflections, so fingerprints and minor marks show less in everyday use. The subtle warm hue of the satin nickel supports a classic visual tone that works across a range of cabinet colors and room styles.
This Amerock Davenport 6-5/16 inch pull is defined by its 160 mm center-to-center dimension, giving a precise distance between mounting holes for new or replacement layouts. On new cabinetry, that fixed spacing allows installers to set up jigs or drilling templates for efficient, repeatable runs on doors and drawers. When used as a replacement, the 160 mm center-to-center measurement allows alignment with existing borings drilled to that metric spacing so the handle seats correctly without altering the face. The modern industrial styling built into the Davenport shape supports use on both frameless and face frame cabinets where a bolder pull profile is desired. Satin nickel finish on the pull coordinates with satin nickel decorative hardware, helping maintain a unified look when multiple Amerock pieces are used in the same room.
The Amerock BP36607G10 Davenport 160 mm center-to-center pull is suited to cabinet doors and drawers that call for a longer handle span and a clear modern industrial line. The 6-5/16 inch length gives generous hand space across wider drawer fronts, supporting comfortable operation in kitchens, baths, or built-in storage where users interact with the hardware repeatedly throughout the day. Within the Davenport collection, this pull size helps tie tall pantry doors and broad drawers together visually, because the simple lines and bold curves repeat in a consistent profile from one opening to the next. Satin nickel with its subtle warm tone allows this pull to sit comfortably against painted, stained, or laminate cabinet faces without dominating color choices, supporting both light and dark design schemes. In mixed-hardware spaces, the satin nickel finish pairs with many common satin nickel hinges and decorative pieces, helping the hardware read as one intentional system.
The defined 160 mm center-to-center measurement on the Amerock Davenport pull supports accurate layout, especially when multiple installers are working from the same drilling standard on a larger job. By using the 6-5/16 inch length, templates or jigs can be set to that single bore spacing, reducing layout variation and helping faces line up across banks of cabinets. The simple line geometry of the Davenport profile lets the pull sit square to the edge visually, so when installed to a consistent reveal, the finished run looks straight and deliberate. Bold curves at the grip points form a pronounced contact area, which can help users get a solid grasp on heavier drawers or tall doors without needing to pinch small edges. The satin nickel brushing diffuses light across the pull, so slight surface marks from daily handling tend to blend into the texture, supporting a hardware appearance that stays visually controlled over time. Because this pull is part of Amerock decorative cabinet hardware, it can be paired with other Amerock elements in the same finish to build a cohesive project palette from a single brand line.
The Amerock BP36607G10 Davenport pull has a 6-5/16 inch, or 160 mm, center to center dimension, which sets the exact drilling distance between mounting holes on the cabinet.
The Amerock Davenport BP36607G10 pull uses a satin nickel finish, which combines delicate brushing with a subtle warm hue for a classic, versatile appearance on cabinet fronts.
The Davenport pull style uses simple lines paired with bold curves, giving cabinets a distinctive modern industrial look while still remaining approachable for a range of designs.
The Amerock BP36607G10 Davenport pull is decorative cabinet hardware designed for use on cabinet doors and drawers where a 160 mm center to center handle is required.
This pull is part of the Amerock Davenport collection, so its lines and curves coordinate with other Davenport pieces on multi-opening cabinet installations.
The Davenport 160 mm satin nickel pull, part number BP36607G10, is manufactured by Amerock Corporation as decorative cabinet hardware.
The Amerock BP36607G10 Davenport 6-5/16 inch, 160 mm center-to-center satin nickel pull offers a defined drilling standard and a modern industrial profile for cabinet doors and drawers. Its simple lines, bold curves, and satin nickel finish support consistent styling across a project. For trade professionals and serious DIY users working on kitchens, baths, or built-ins, this Davenport pull provides a clear size, finish, and visual language to match with other Amerock cabinet hardware when planning a coordinated installation.
Sold In: 1 Each
