Amerock Wells Pull 3-3/4" (96 mm) Center to Center, Satin Nickel, BP36548G10

96mm Center To Center Pull For Cabinets

96mm center to center pull from the Amerock Wells collection gives a defined mounting span that matches 3-3/4 in center-to-center layouts, so it drops onto existing drilled cabinet or drawer fronts set for that standard size. The satin nickel finish on this pull provides a muted metallic look that suits decorative hardware and moldings in similar tones, helping keep runs of doors and drawers visually consistent. Zinc die-cast construction forms the body of the pull, creating the shaped profile described for the Wells collection while keeping weight manageable during handling. The overall 4-13/16 in length allows this pull to cover the 96 mm hole spread with some overhang, which helps conceal minor drill variations on cabinet faces. A projection of 1-1/4 in gives working finger clearance off the front, which matters when opening heavier cabinet doors or loaded drawers.

Key Amerock Wells Pull Details For Projects

• The Wells collection design uses a balanced silhouette with angled, gemstone-like edges, which creates a defined grip area that feels consistent across multiple doors or drawers in a run.
• Center-to-center spacing of 3-3/4 in (96 mm) matches common cabinet drilling patterns, which supports straightforward alignment when setting up jigs or matching existing hole layouts.
• Overall length of 4-13/16 in (122 mm) extends beyond the mounting holes, which helps visually frame the pull on the face of the cabinet and can hide slight drill tear-out around the holes.
• Projection of 1-1/4 in (32 mm) stands the pull off the face, which offers room for fingers to wrap behind the pull when operating doors and drawers in typical kitchen or shop environments.
• Width of 13/16 in (21 mm) across the gripping area provides a slim front profile, which helps this pull sit neatly on narrower rails or drawer fronts without overpowering the face.
• Base length and width of 5/8 in (16 mm) at each foot define a compact contact patch, which helps the pull seat cleanly on standard cabinet stile and rail dimensions.

Installation Dimensions For Amerock BP36548G10 Pull

This Amerock BP36548G10 pull uses a 3-3/4 in (96 mm) center-to-center dimension, which fixes the hole-to-hole spacing for drilling or aligning to existing bores on cabinet doors and drawers. The 4-13/16 in (122 mm) overall length sets how much of the cabinet face the pull occupies edge to edge, which helps with laying out consistent reveals from neighboring hardware. A projection of 1-1/4 in (32 mm) defines how far the pull stands off the surface, which can be factored against adjacent doors to avoid interference when fronts open past each other. The 13/16 in (21 mm) width and 5/8 in (16 mm) by 5/8 in (16 mm) base size allow this pull to sit comfortably on common rail heights, which matters when spacing hardware relative to panel profiles or edge details.

Using This Amerock Wells Satin Nickel Cabinet Pull

Where This 3-3/4 Inch Cabinet Handle Works

The Amerock Wells series pull is specified under decorative hardware and moldings in the handles and pulls class, so it is suited to cabinet doors and drawer fronts that call for a visible pull. The satin nickel finish on this Amerock Wells satin nickel pull pairs with other satin nickel decorative cabinet hardware, which supports visual continuity on kitchens, baths, or built-ins using similar finishes. The 3-3/4 in (96 mm) center-to-center size matches drilling layouts built around that spacing, which makes this 96 mm cabinet handle replacement useful when swapping out older pulls that share the same metric pattern. With a 4-13/16 in (122 mm) length, the pull spans enough area on typical drawer fronts to give a stable grasping point while keeping a proportion that fits standard cabinet widths.

Why These BP36548G10 Details Support Consistent Results

The 96 mm center-to-center specification on the BP36548G10 Amerock pull defines an exact drilling dimension, which helps installers repeat hole spacing across multiple cabinets using jigs or stop setups. Zinc die-cast material forms a solid body for the Amerock decorative cabinet pull, which supports the shaped Wells profile while keeping each piece consistent from unit to unit on large jobs. The 1-1/4 in (32 mm) projection sets reliable clearance behind the pull, which helps hands catch the pull the same way across doors and drawers, reducing fumbling in busy kitchen or shop environments. Base dimensions of 5/8 in (16 mm) by 5/8 in (16 mm) at each end give a known footprint, which simplifies positioning the pull relative to rail edges or panel details when laying out hardware lines. The satin nickel finish ties all of these measurements together with a uniform surface treatment, which helps long cabinet runs read as a single, coordinated installation.

Common Buyer Questions About This Amerock Pull

Choose The Right 96mm Center To Center Pull

This 96mm center to center pull from Amerock Corporation combines a Wells collection profile, satin nickel finish, and zinc die-cast construction, giving a defined look with known dimensions for layout. The 3-3/4 in (96 mm) center-to-center span, 4-13/16 in (122 mm) overall length, and 1-1/4 in (32 mm) projection provide clear numbers for cabinet drilling and spacing work. For projects using decorative hardware and moldings in satin nickel, this Amerock Wells cabinet pull aligns mounting dimensions and finish in a single part number.