Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Wells 96mm pull is a zinc die-cast cabinet handle from the Wells collection in a polished nickel finish. The 3-3/4 in (96 mm) center-to-center mounting spreads the load across two points, which helps keep drawers and doors operating smoothly under regular use. The polished nickel finish provides a bright, reflective surface that coordinates with other polished nickel hardware, giving cabinets a unified appearance across a run. The handle length of 4-13/16 in (122 mm) offers a comfortable gripping area between the posts, supporting steady opening and closing movements on cabinet doors and drawers. A projection of 1-1/4 in (32 mm) steps the pull out from the cabinet face, allowing fingers to wrap behind the bar without rubbing against the door or drawer front.
The 3-3/4 in (96 mm) center-to-center mounting dimension defines where the two holes are drilled, which lets installers use standard 96 mm templates or boring patterns for quick layout. A projection of 1-1/4 in (32 mm) sets the handle off the front, providing space for fingers to pull without contacting the cabinet surface. The 13/16 in (21 mm) width offers enough face area for a firm grip, supporting controlled opening of heavier drawers or wider doors. Base pads measuring 5/8 in (16 mm) square at each end help distribute the load against the cabinet face, which can support stable mounting on typical cabinet materials.
This Amerock Wells series pull with 3-3/4 in (96 mm) center-to-center spacing fits layouts based on the 96 mm drilling standard, which is common on many cabinet and drawer designs. The 4-13/16 in (122 mm) overall length suits typical kitchen and bath cabinet fronts, giving enough bar length so hands find the pull quickly on doors and drawers. Its 13/16 in (21 mm) width presents a solid front profile, helping the handle stand out visually on cabinet faces in woodworking or remodeling projects. The polished nickel finish coordinates with other polished nickel fittings, supporting consistent hardware appearance across a full room installation. The Wells collection styling, with its balanced silhouette and gemstone-like angled edges, can complement cabinets that use squared profiles, bringing a coordinated, angular look to the hardware lineup.
The fixed 3-3/4 in (96 mm) center-to-center dimension on the BP36548PN cabinet pull simplifies repeat drilling, which helps maintain straight alignment of handles along rows of doors and drawers. Zinc die-cast construction allows Amerock Corporation to produce pulls with consistent dimensions, so each piece in the Wells collection matches the next for tight visual lines across an installation. The 1-1/4 in (32 mm) projection gives a predictable stand-off distance, which can support smooth hand clearance even when doors sit close to adjacent panels or appliances. Base dimensions of 5/8 in (16 mm) by 5/8 in (16 mm) at each post create a defined footprint, helping installers register the pull square to door edges when tightening fasteners. The polished nickel finish presents a bright face that pairs with other polished nickel decorative hardware and moldings, aiding in building a cohesive look around cabinets and related fittings.
The Amerock Wells 96mm pull has a 3-3/4 in (96 mm) center-to-center, 4-13/16 in (122 mm) length, 1-1/4 in (32 mm) projection, and 13/16 in (21 mm) width, supporting comfortable everyday cabinet operation.
The 96 mm center-to-center spacing on this Amerock Wells series pull matches a common drilling standard, allowing installers to use existing 96 mm jigs or patterns for consistent mounting.
The BP36548PN cabinet pull is zinc die-cast, which supports precise molded shapes and consistent dimensions across multiple pulls in a cabinet hardware layout.
The Amerock Wells 96mm pull uses a polished nickel finish, providing a bright, reflective surface that coordinates with other polished nickel decorative hardware.
This Wells collection pull has a 1-1/4 in (32 mm) projection, creating hand clearance between the handle and cabinet front for a secure grip on doors and drawers.
Each end of the BP36548PN pull has a base length and width of 5/8 in (16 mm), providing a defined contact area against the cabinet surface for stable mounting.
The Amerock Wells 96mm pull in polished nickel gives installers a defined 3-3/4 in (96 mm) center-to-center pattern, which fits projects built around the 96 mm standard. With a 4-13/16 in (122 mm) length, 1-1/4 in (32 mm) projection, and 13/16 in (21 mm) width, it balances grip comfort with clean lines on cabinet fronts. The zinc die-cast construction and polished nickel finish from Amerock Corporation provide a coordinated look within the Wells collection for cabinet hardware jobs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AMBP36548-G10 Mfr# BP36548G10 | Amerock Wells 3-3/4" (96 mm) Center to Center Satin Nickel Pull, BP36548G10 |