Amerock Wells Series Polished Nickel 1-1/2 in (38 mm) L x 1-1/2 in (38 mm) W Knob, -BP36547PN

Amerock Wells Knob For Precise Cabinet Styling

Amerock Wells knob defines this 1-1/2 in (38 mm) long cabinet knob, so installers get a known decorative hardware line that coordinates across projects. The Wells collection description notes a perfectly balanced silhouette with angled, gemstone-like edges, giving doors and drawers a crisp, geometric look that reads clearly in finished millwork. The ability to mount the knob at 45 degrees to create a diamond shape adds a simple axis choice that changes the visual direction of a run of fronts. With a width of 1-1/2 in (38 mm) matching the length, the face presents as a square, which helps align sightlines on frameless and face-frame cabinetry. The Amerock Corporation brand and Amerock Wells collection context connect this knob to a broader system, aiding consistent selections on multi-room or multi-phase jobs.

Key Wells Knob Details That Support Your Work

• The zinc die-cast material creates a solid-feeling knob body, which supports a firm hand grip when operating cabinet doors or drawers day after day in busy spaces.
• The polished nickel finish delivers a bright, reflective surface, helping the knob visually tie into other polished nickel decorative hardware for a unified appearance across a project.
• The 1-1/2 in (38 mm) length provides a substantial front surface, giving fingers a clear edge to pull against on both cabinet doors and wider drawer fronts.
• The 1-1/2 in (38 mm) width matches the length, so the knob presents a square footprint that helps maintain consistent lines when you repeat it across cabinetry runs.
• The 1-3/8 in (35 mm) projection sets the working distance off the door or drawer face, providing finger clearance while keeping the hardware close enough to avoid snagging in tighter walkways.
• The 3/4 in (19 mm) by 3/4 in (19 mm) base size defines the contact area at the mounting point, helping you anticipate how much of the door or drawer surface will be visually covered beneath the knob.

Amerock Wells Knob Mounting And Fit Details

The Amerock Wells Series polished nickel knob uses a screw size of 8-32 x 1 in, establishing a familiar machine screw standard for cabinet doors and drawers that accept this thread. The 1-3/8 in (35 mm) projection defines how far the grip surface stands off the face, which helps plan layouts near adjacent hardware or trim where clearance matters. With both length and width at 1-1/2 in (38 mm), the knob centers cleanly on typical cabinet rail or stile widths, supporting balanced sightlines in framed construction. The base length and width of 3/4 in (19 mm) describe the bearing area against the panel, which helps you understand how the knob will visually seat against flat or profiled fronts. The Wells collection note about mounting at 45 degrees adds a rotational option that can be used to align with door edges or diagonal design elements.

Using The Wells Knob For Consistent Results

Where The Amerock Wells Knob Works Best

This Amerock Wells knob from the Wells collection is specified as 1-1/2 in (38 mm) long and 1-1/2 in (38 mm) wide, giving it a square face that suits both cabinet doors and drawers where a unified look is important. The decorative description highlighting a perfectly balanced silhouette and angled, gemstone-like edges points it toward installations where you want defined geometry rather than soft contours. With a 1-3/8 in (35 mm) projection, the knob provides working clearance that fits common cabinet depths and adjacent fronts, which is useful on lined-up kitchen, bath, or built-in runs. The polished nickel finish places it naturally in projects that already feature polished nickel decorative hardware, allowing this knob to blend into an established finish schedule. As part of Amerock decorative hardware and moldings in the knob category, it functions as a primary touchpoint on cabinet faces.

Details That Support Alignment And Repeatable Layouts

The equal 1-1/2 in (38 mm) length and width of this zinc die-cast cabinet knob simplify layout because a single centerline measurement produces a consistent square orientation on every door or drawer front. When rotated as described at 45 degrees to form a diamond shape, the same dimensions still frame neatly within narrow or wider rails, helping keep visual rhythm even when cabinet sizes change. The 3/4 in (19 mm) by 3/4 in (19 mm) base defines the trim area contacting the surface, which also predicts how the polished nickel finish will visually border any panel detail. The zinc die-cast construction gives the knob body uniform density, which supports a steady feel every time the knob is grasped. The specified 8-32 x 1 in screw size provides an established connection standard that aligns with the knob body, supporting secure mounting into prepared cabinet fronts without guesswork about threads.

Common Questions About This Amerock Wells Knob

Select This Wells Knob For Finish-Matched Projects

The Amerock Wells Series BP36547PN knob combines a 1-1/2 in (38 mm) square face, 1-3/8 in (35 mm) projection, and polished nickel finish to support clean, repeatable cabinet layouts. The zinc die-cast construction and defined base dimensions help installers predict how it will sit and read on doors and drawers. For projects planned around polished nickel decorative hardware with geometric styling from the Wells collection, this knob offers a coordinated option that aligns measurements, finish, and visual character across the job.