Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SurfPrep interface pad gives you a 3 x 4 inch rectangular pad sized for small, flat work areas, so you can keep sanding focused where you need material removal without wandering into finished sections. The 15mm firm interface pad creates a defined support layer between your tool and abrasive, which helps maintain a flatter surface profile when you are sanding woodworking parts that need crisp lines. A non-vacuum design keeps the pad solid across its face, so contact with the workpiece stays even from edge to edge during each pass. Hook and loop backing on the pad lets you attach and remove compatible abrasives quickly, helping you move between grits or change worn sheets without interrupting your workflow. SurfPrep branding and the SPIP3X4F15MM part number identify the pad clearly for repeat ordering when you standardize on this setup.
This 3 x 4 inch SurfPrep interface pad uses a hook and loop connection surface, so compatible abrasives attach by pressing them onto the pad rather than using adhesive. The 15mm firm structure provides a defined backing thickness between the tool and abrasive, which supports predictable contact pressure across the work area. Because the pad is described as non-vacuum, there are no vacuum holes in the interface layer, so the sanding face stays continuous during operation. The rectangular 3 x 4 inch footprint fits into tighter spaces than larger pads, which is useful when you are working around smaller woodworking components that benefit from a compact contact area.
The 3 x 4 inch interface size aligns well with smaller woodworking parts such as narrow panels or component faces where a compact pad can move with more control. The rectangular shape supports straight passes along edges or rails, helping your abrasive track the length of the workpiece instead of rolling toward adjacent sections. With its non-vacuum layout, the pad face stays solid, which can be useful when sanding where a continuous contact surface is preferred over a perforated pattern. The yellow firm interface layer is 15mm thick, creating a noticeable buffer that still stays supportive as you guide the tool across the work surface. This firm construction is suited to tasks where you want the pad to support the abrasive with less give, helping maintain the geometry of the part.
The 15mm firm interface pad acts as a stable backing, so each time you touch the surface with compatible hook and loop abrasives, the pad responds in a similar way, which supports repeatable sanding passes on multiple parts. Hook and loop attachment allows quick abrasive changes, so you can switch between grits while keeping the same interface pad under the media, helping maintain a consistent feel from part to part throughout a sanding sequence. Because the pad is non-vacuum, the contact area stays uninterrupted, which can help you feel the tool tracking across the workpiece as you guide it. The rectangular 3 x 4 inch layout works well when you need to keep the working face aligned in one direction, such as along the length of a small panel, supporting straight-line sanding habits in the shop.
The SurfPrep SPIP3X4F15MM interface pad is described as a 3 x 4 inch rectangle, which focuses sanding on smaller areas and helps when working on compact woodworking parts.
The interface pad is identified as a 15mm firm pad, providing a supportive layer between tool and abrasive so the surface stays more controlled during sanding.
The SurfPrep interface pad uses a hook and loop surface, letting compatible abrasives press on and pull off quickly for efficient grit changes during sanding stages.
The pad is described as non-vacuum, meaning the interface layer does not have vacuum holes, so the sanding contact surface stays continuous across the pad face.
The pad is a 3 x 4 inch SurfPrep interface piece in the sanders and accessories class, fitting workflows that use a rectangular 3 x 4 sanding footprint.
This SurfPrep interface pad uses the SPIP3X4F15MM manufacturer part number and is described as a 3 x 4 15mm firm interface pad, yellow, which helps match it in future orders.
The SurfPrep interface pad in 3 x 4 inch size, with a 15mm firm non-vacuum design and hook and loop surface, supports a defined sanding footprint for woodworking parts that benefit from controlled, repeatable passes. The SPIP3X4F15MM identifier and SurfPrep brand tie directly to the product details, so it can be adopted as a standard pad within a sanding setup for small rectangular work areas. For shops that want a firm interface layer under their hook and loop abrasives in this footprint, this pad aligns with that requirement.
Sold In: 1 Each