Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 gallon pressure tanks from C.A. Technologies give spray setups a dedicated supply source sized for longer runs, so the operator can focus on spraying instead of refilling small cups mid-job. This 51-554 model is identified as a pressure tank 10G with air agitator, which means the tank is built to hold approximately ten gallons while supporting an agitated material feed, helping keep compatible coatings moving during use. The tank belongs to C.A. Technologies spray equipment in the pressure tanks and cups class, so it is designed to work as part of a pressurized delivery system rather than as a simple storage container. A bottom outlet design positions the 3/4 inch outlet with ball valve at the base of the tank, helping material flow toward the line connection by gravity and pressure together when the system is operating.
The bottom outlet layout on this 10 gallon pressure tank places the 3/4 inch outlet and ball valve at the lowest point, so material moves down toward the outlet under pressure and weight during operation. As a pressure tank 10G with air agitator, the unit is identified for use with an air-driven agitation system, which supports keeping compatible coatings moving inside the tank while the spray equipment draws from the bottom outlet. The wheels fitted to the tank let crews position the vessel relative to hoses and guns before pressurizing, which helps arrange hose routing for each job. When stationary mounting is preferred, optional stationary feet are available by special order, so the same tank design can be set up as a fixed supply in a finishing area.
This C.A. Technologies 51-554 tank sits in the spray equipment category as a pressure tank and cup product, so it functions as the material supply for pressurized spray systems rather than as a transfer container. The 10 gallon capacity gives room for larger batches of compatible material in shops that want to run extended spray sessions without frequent material changes, which supports cabinet, millwork, or other finishing lines using continuous flow equipment. With the bottom outlet design and 3/4 inch outlet size, the tank is suited to applications that route material lines low to the floor or bench, keeping hoses directed away from the operator while supplying guns or automatic spray devices drawing from the base of the vessel during production.
The heavy gauge steel build of this 10 gallon pressure tank supports the pressurized environment needed in spray equipment, helping the vessel maintain its form when under working pressure so flow to the gun or spray device stays consistent. The baked-on coating on the tank creates a bonded finish over the steel body, which helps resist routine shop wear and allows cleaning of overspray or dust from the surface between jobs without exposing bare metal. The 3/4 inch bottom outlet with ball valve defines a clear interface for material lines, so installers can set up hose and fitting combinations that match this size and control the start and stop of material flow at the tank during setup or changeover. The air agitator designation means the tank is intended to operate with air-driven agitation, which helps keep compatible materials moving inside the vessel, supporting more uniform feed toward the outlet over the course of a spray session.
The C.A. Technologies 51-554 is a 10 gallon pressure tank, so it holds a larger batch of compatible material for extended spray runs in a finishing setup.
The 10 gallon pressure tank uses a bottom outlet with a 3/4 inch outlet and ball valve, so material flows from the lowest point and can be shut off at the valve.
The heavy gauge steel shell gives the pressure tank structural strength for spray equipment duty, supporting the internal pressure and helping maintain shape during movement.
The baked-on coating creates a bonded finish over the steel tank body, which helps protect the surface in typical shop environments and simplifies exterior cleaning.
Being described as a pressure tank 10G with air agitator means the tank is intended to work with air-driven agitation, helping keep compatible materials moving during spraying.
This 10 gallon pressure tank has wheels, so crews can roll it to a convenient position relative to spray equipment before pressurizing the system.
This C.A. Technologies 10 gallon pressure tank gives spray operations a heavy gauge steel vessel with a bottom 3/4 inch outlet and ball valve, sized for extended runs. With a baked-on coating, wheels for maneuverability, and an air agitator designation, it is set up as a working supply tank within the spray equipment and pressure tanks and cups category for shops that want a defined, mobile material source.