Rev-A-Shelf 4WDB7 Series 20-1/16"W Maple Pilaster System Soft-close Full extension Slides, Door Mount - 4WDB7-24SC-1

Choose a Rev-A-Shelf wood drawer system

Rev-A-Shelf wood drawer system gives base cabinet storage a defined pull-out format with a maple pilaster drawer system layout, soft-close base drawer pull-out operation, and door mount drawer system functionality. This Rev-A-Shelf 4WDB7 Series unit is a wood drawer system built with dovetail constructed veneer plywood. It includes full extension Blum soft-close slides and a peg hole bottom, plus pegs and dividers for adjustable organization. The listed size is 20-1/16 inches wide by 8 inches high. Buyers looking for RS4WDB7-24SC-1 or a base cabinet drawer organizer can use this model when they need a maple drawer pull-out that extends fully and closes quietly. The included door-mount format can help create a cabinet front that moves with the pull-out drawer system.

See how this drawer system helps

• Dovetail constructed veneer plywood - The Rev-A-Shelf wood drawer system uses a joined wood box construction that supports a clean cabinet interior and a durable drawer format.
• Full extension Blum soft-close slides - This drawer system opens fully for better access to stored items and closes with a controlled motion.
• Rated at 100 lb - The Rev-A-Shelf drawer system is listed with a 100 lb slide rating, which helps buyers match the pull-out to planned storage loads.
• Peg hole bottom - The peg hole base supports adjustable layout options inside the maple drawer pull-out.
• Includes pegs and dividers - Included organizers help separate contents without requiring extra accessory sourcing at the time of purchase.
• Door mount drawer system design - The front panel can move with the pull-out, which helps create a built-in look for base cabinet access.
• 20-1/16 inch width and 8 inch height - The listed drawer dimensions give installers a starting point when checking cabinet opening and interior clearance.
• Rev-A-Shelf 4WDB7 Series format - The series identification helps repeat buyers and shop teams match an existing specification or replacement order.

Confirm drawer system fit and contents

Key specs to confirm: This soft-close base drawer pull-out is listed at 20-1/16 inches wide and 8 inches high. Buyers should confirm cabinet interior width, depth, opening clearance, and door-mount compatibility before ordering. Because this is a door mount drawer system with full extension drawer slides, verify that the cabinet construction allows the pull-out and attached door front to travel freely. The product data confirms Blum soft-close slides and a 100 lb rating, but any additional installation dimensions, required clearances, and mounting details should be checked in manufacturer documentation. If any compliance, safety, or other technical requirements apply to your project, those details should be confirmed with the manufacturer or technical documentation.

What's included: Verified included items are the dovetail constructed veneer plywood drawer system, full extension Blum soft-close slides, peg hole bottom, pegs, and dividers. Packaging is sold as shown below in the source description, so buyers should confirm any additional mounting hardware details if needed for their job.

What to verify before ordering: Confirm cabinet type, inside opening size, usable depth, door attachment method, slide clearance, and whether the listed 20-1/16 inch width and 8 inch height match your application. Also verify that RS4WDB7-24SC-1 is the correct size within the Rev-A-Shelf 4WDB7 Series for your cabinet plan.

Compare this soft-close base drawer pull-out

Use a maple pilaster drawer system daily

A maple pilaster drawer system like this is typically chosen when a buyer wants more controlled storage in a base cabinet without moving to a fully custom interior build. In a kitchen or bath cabinet, loose items can shift to the back of the opening and become harder to reach. A soft-close base drawer pull-out addresses that problem by bringing the stored contents forward on full extension drawer slides. This product is also built as a door mount drawer system, which can help create a cleaner operating setup when the cabinet front is intended to move with the drawer.

The Rev-A-Shelf wood drawer system is identified as part of the 4WDB7 Series and uses dovetail constructed veneer plywood. That matters to installers and remodel buyers who want a wood drawer system rather than a wire basket format. The peg hole bottom, pegs, and dividers add another practical advantage. Instead of one open box, the interior can be arranged to separate items based on size or use. For a buyer searching for a base cabinet drawer organizer, that adjustability is often the difference between simple storage and organized storage.

This model is listed at 20-1/16 inches wide and 8 inches high, so it is important to match those dimensions to the actual cabinet interior and not just the nominal cabinet size. If your cabinet has obstructions, face frame limitations, or unusual door geometry, those conditions should be reviewed before purchase. Buyers using RS4WDB7-24SC-1 as a replacement should also confirm that the existing cabinet can accept Blum soft-close slides and the listed drawer format. When the fit is correct, a maple drawer pull-out like this can improve access, keep items separated, and reduce the need to reach into the back of the cabinet.

Compare full extension drawer slides confidently

When buyers compare pull-out storage options, the most useful differences are usually construction style, extension type, closure action, and included organization parts. This Rev-A-Shelf drawer system is clearly described as a wood drawer system with dovetail constructed veneer plywood, full extension Blum soft-close slides, and a peg hole bottom with pegs and dividers included. That gives the buyer a defined set of verified features to compare against other drawer system types.

Full extension drawer slides matter because they allow the drawer to travel outward so more of the stored contents can be reached. Soft-close operation matters because it controls the closing motion and can reduce abrupt shut movement. A door mount drawer system matters when the application calls for the cabinet front to function as part of the pull-out assembly. Those are practical comparison points that do not depend on styling claims.

Another useful comparison point is buying clarity. This product is tied to the Rev-A-Shelf brand, the 4WDB7 Series, and the manufacturer part number RS4WDB7-24SC-1. For trade buyers, that helps with repeat ordering, specification matching, and replacement planning. If you are comparing this item to another base cabinet drawer organizer, focus on verified dimensions, included components, slide type, and whether the cabinet opening and door configuration match the intended installation. If exact depth requirements or mounting details are needed, confirm those in manufacturer guidance before placing the order.

Ask fit questions before ordering

Order the right door mount drawer system

Door mount drawer system buyers usually need clear fit details, included parts, and known operating features before they order. This Rev-A-Shelf wood drawer system includes dovetail constructed veneer plywood, full extension Blum soft-close slides, a peg hole bottom, and pegs with dividers. Before purchase, confirm that the listed 20-1/16 inch width, 8 inch height, cabinet interior space, and door-mount setup match your project. If you are matching an existing installation, verify that RS4WDB7-24SC-1 is the correct 4WDB7 Series size for the cabinet opening.