Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand, 2D-adjustable front locking device for the Pro Value Series PRO600 undermount drawer slide system. It fastens under the drawer box front and locks the drawer onto its PRO600 slides, with two-way adjustment to fine-tune the front's position after installation.
Front locking devices are the connection point between the drawer box and the undermount slide pair. On PRO600-equipped drawers, this device clips under the drawer front, locks the box onto the slides, and holds the front square to the face frame or cabinet opening. The 2D adjustment range handles the minor front-positioning corrections that are normal in production cabinet work — height drift after hinging, slight lateral misalignment from box tolerances, or front leveling on a run of drawers. It is the right choice when height and side correction are the only adjustments needed and depth or tilt tuning is not required.
The device is molded in black plastic, which keeps weight low and eliminates any risk of finish transfer to the cabinet interior. Black blends with the PRO600 slide hardware and stays out of sight under the drawer front. Plastic construction is standard for this locking device class and suited to the indoor, dry environments where PRO600 slides are installed.
Cabinet shops running PRO600 undermount slides will stock this device as a line item alongside the slides themselves. It is also the right replacement or retrofit part when a locking device is lost or damaged on an existing PRO600 installation. Designers specifying the PRO600 system should note that each drawer requires one left-hand and one right-hand locking device — this listing covers the left-hand member only. For installations needing depth or tilt correction in addition to height and side, the PRO600 family includes 3D locking devices with the additional adjustment range.
No. This device is engineered for the PRO600 series specifically. Front locking devices are brand- and series-matched components; a PRO600 clip will not seat correctly on a different undermount system.
No. This is the left-hand member only. A complete drawer installation requires one left-hand and one right-hand front locking device — order both orientations.
Height and side. The device adjusts up to +3mm in height and +/- 1.5mm side-to-side. If you also need depth or tilt correction, look at the PRO600 3D locking device for the wider adjustment range.
Tool-free release behavior is standard on this locking device class, but confirm the specific release method against the PRO600 installation instructions before specifying for a high-cycle application.
Stocking the correct left-hand PRO600 locking device means a missing clip does not hold up a run of drawers. Order both orientations together and have the adjustment range you need to hang fronts true on the first pass.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 6 Set |  DSPRO600-12 Mfr# 0684250501961 6 | PRO Value PRO600 6-Pair Box 12" Soft-Close Full Extension 100 lb Undermount Drawer Slide, Zinc, 0684250501961 6 | ||||
Sold in: 6 Set |  DSPRO600-15 Mfr# 0684250502961 6 | PRO Value PRO600 6-Pair Box 15" Soft-Close Full Extension 100 lb Undermount Drawer Slide, Zinc, 0684250502961 6 | ||||
Sold in: 6 Set |  DSPRO600-21 Mfr# 0684250504961 6 | PRO Value PRO600 6-Pair Box 21" Soft-Close Full Extension 100 lb Undermount Drawer Slide, Zinc, 0684250504961 6 |