Hickory Hardware self-close hinge describes a semi-concealed face frame hinge that pulls the door shut on its own, which helps doors sit closed without relying on catches. The hinge is described as surface self-closing, so it mounts to the surface while still drawing the door firmly against the frame, which supports consistent alignment on repeated openings. It is identified as a 3/8 inch inset semi-concealed face frame hinge, meaning part of the hinge remains visible while holding an inset door with a defined reveal, which suits traditional cabinet layouts where partial visibility is acceptable. The product is listed under semi-concealed hinges, so the hardware balances a clean look with straightforward access to the moving parts, which helps during adjustment or replacement. The material is steel, giving a solid, rigid base that supports the door load in regular cabinet use.
The 1/4 inch overlay value describes how much the cabinet door covers the face frame when closed, which directly affects the gap between neighboring doors on a bank of cabinets. The 3/8 inch inset and 3/8 inch offset listed together define the relationship between the door and frame edges, which guides placement so the door sits correctly within the opening while still clearing the frame when opening. The stated projection of 1-1/4 inches shows how far the hinge moves the pivot from the mounting surface, which influences both swing arc and interior clearance for shelves or pullouts. A width of 2-3/4 inches offers enough mounting surface for screw spacing, which supports a stable install across the frame and door stile. The screw-on description means the hinge installs using screws into the cabinet materials, which suits standard woodworking practices with face frame cabinets.
This hinge is described as a semi-concealed face frame hinge, so it is intended for cabinets that use a face frame structure rather than frameless construction. The 3/8 inch inset callout shows it is designed for doors that sit partially within the frame opening, which fits traditional and transitional cabinet styles where the door does not fully overlay the frame. The 1/4 inch overlay specification means the door still covers part of the face frame, so installers can create a defined reveal that aligns with nearby doors using the same hinge. Because the hinge is surface self-closing, it is suited to cabinet doors that benefit from a built-in closing action, such as kitchen, bath, or utility cabinets where doors are opened frequently during daily use. The vintage bronze finish provides a visible accent on the semi-concealed portions, supporting projects that coordinate with similar bronze knobs, pulls, or other decorative hardware.
The combination of 3/8 inch offset and 1/4 inch overlay provides clear numeric references for door positioning, which aids repeatable layout when hanging several doors along a face frame run. The projection of 1-1/4 inches defines the hinge throw from the mounting surface, which helps predict how the door will swing past the frame and reduces trial-and-error fitting. A hinge width of 2-3/4 inches spreads the mounting area across more of the frame and door, which distributes load and supports long-term stability under regular cabinet use. The material specified as steel supplies a sturdy structure for the self-closing mechanism, which supports the repeated closing action over time. The screw-on description indicates direct fastening with screws through the hinge plates, which matches common shop workflows using standard drill and driver setups on wood face frames and doors.
The hinge is described as a semi-concealed face frame hinge, so it is intended for cabinets built with a face frame rather than frameless cabinet construction.
The hinge overlay of 1/4 inch sets how much the door covers the face frame, which helps establish consistent reveals and alignment between adjacent cabinet doors.
The 3/8 inch inset and 3/8 inch offset describe the door position relative to the frame opening, guiding placement so inset doors clear the frame while closing properly.
The surface self-closing feature pulls the door shut as it nears closed, which helps doors stay closed against the face frame without separate catches or latches.
The 1-1/4 inch projection indicates how far the hinge moves the pivot from the mounting surface, which affects swing clearance around frames, shelves, or adjacent doors.
The hinge material is steel with a vintage bronze finish, so visible parts show a bronze tone while the steel base supports cabinet door loads in regular service.
This hinge is identified as the Hickory Hardware self-close 3/8 inch inset semi-concealed face frame hinge in vintage bronze with part number P61030F-VB, giving a precise reference when matching or planning cabinet hardware. The defined 1/4 inch overlay, 3/8 inch offset, 1-1/4 inch projection, and 2-3/4 inch width provide clear layout dimensions, which support consistent door reveals and swing behavior across a project. The steel construction with a vintage bronze finish suits projects that need a sturdy face frame hinge with a coordinated bronze appearance. For cabinet work that uses face frames and inset-style doors, this hinge configuration from Belwith Keeler and Hickory Hardware offers a specific, repeatable set of mounting and door-positioning details to build around.