Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
surface face mounted steel hinge from the Belwith Keeler Surface Face Mounted Series gives you a flush, semi-concealed face-frame hinge that mounts directly to the surface, helping you hang or replace doors without mortising work in the shop. The steel material provides a solid hinge body, which supports dependable movement every time the door swings on a face frame. The Colonial Black finish defines the hinge appearance, letting you match dark or traditional cabinet hardware across a run of doors. The hinge length of 3-7/16 inches sets the overall strap coverage on the door stile, which helps you visually balance hinge size with door height. A width of 1-7/16 inches defines how much frame face is occupied, which matters when laying out multiple hinges closely along a narrow stile.
The hinge length of 3-7/16 inches defines the vertical footprint, which helps you position the hinge to spread load along the door edge. The 1-7/16 inch width sets how much frame face is covered, important when working with narrow stiles or tight reveals. A projection of 1/4 inch establishes the offset between door and frame, guiding how the door sits when closed relative to adjacent fronts. The listed width of 1-1/4 inches in the description highlights the general size class, helping you keep this hinge grouped with similar compact surface hinges during planning.
This hinge belongs to the Surface Face Mounted Series and the Surface Mount Hinges product class, so it is intended for surface applications where the hinge leaf sits directly on the cabinet face and door. The semi-concealed face-frame hinge category shows that it is suited for face-frame cabinets, where part of the hinge is visible on the frame. The 3-7/16 inch length works well on many cabinet door sizes because it offers a moderate strap length that can be placed near the top and bottom of a door without crowding the corners. A width of 1-7/16 inches works with many standard face frames, so the hinge can sit comfortably on the stile without overhanging the edge.
The center to center distance of 2-3/8 inches between mounting points gives you a repeatable drilling pattern, which helps keep hinges aligned from door to door on a run of cabinets. The 1/4 inch projection defines how far the knuckle sits off the frame, which directly affects how the door clears the face frame during operation. The steel construction maintains that geometry under use, supporting consistent gaps as the door cycles. The Colonial Black finish ties the hinge visually to other Colonial Black components, helping you maintain a uniform appearance when swapping out older hardware. The Belwith Keeler brand and P106-CB part number identify the exact hinge, which matters when reordering for additional cabinets or matching an existing installation during later work.
The P106-CB is a surface face mounted, semi-concealed face-frame hinge in the Surface Mount Hinges class, which suits applications where the hinge mounts directly on the cabinet and door surfaces.
The hinge has a length of 3-7/16 inches, a width of 1-7/16 inches, a projection of 1/4 inch, and a 2-3/8 inch center to center screw pattern, guiding layout and drilling.
The 1/4 inch projection sets how far the hinge moves the door away from the mounting surface, influencing the door-to-frame clearance when closed and during swing.
The hinge is made from steel with a Colonial Black finish, giving a solid metal body with a dark appearance that coordinates with other Colonial Black hardware.
The 2-3/8 inch center to center dimension describes the spacing between mounting points, which guides hole placement when installing or matching an existing pattern.
This semi-concealed face-frame hinge leaves part of the hinge visible on the face frame while the rest sits between door and frame, providing a traditional, partially hidden look.
This Belwith Keeler surface face mounted steel hinge in Colonial Black offers a defined 3-7/16 inch length, 1-7/16 inch width, 1/4 inch projection, and 2-3/8 inch center to center screw pattern, giving you clear parameters when planning cabinet layouts. The semi-concealed face-frame design fits face-frame work where a traditional visible hinge is desired. Using the P106-CB part number keeps ordering aligned with this exact hinge when you need consistency across multiple cabinets on the same project.