Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware free swinging inset non-mortise finial tip hinge gives you a semi-concealed hinge solution for face-frame cabinetry, so doors sit properly inset while hardware stays visually light. This semi-concealed hinge style lets the hinge support the door while keeping most of the hardware discreet, which suits projects where visible hardware is kept to a minimum. The self mortise hinge 2-1/2 L x 1-1/2 W format defines the hinge footprint at the door and frame, helping you plan stile width and hinge layout confidently. As a free swinging hinge, it lets the door move through its swing without built-in closing force, which works well where door motion is controlled by stops or other components.
The self mortise hinge 2-1/2 L x 1-1/2 W sizing tells you how much frame and door real estate this hinge occupies, which helps you balance edge clearances and spacing when laying out multiple hinges on a tall door. Being a screw-on style hinge means the leafs fasten directly with screws, so the layout relies on your drilling pattern rather than cutting mortises. This semi-concealed hinge format works with face-frame construction, so the leaves sit where the frame and inset door meet, supporting the door within the opening while the frame still defines the cabinet front.
The P8293-VB vintage bronze hinge belongs to the semi-concealed hinge product class, which positions it for face-frame cabinet work where some hardware visibility is acceptable but a full wrap or surface strap is not desired. Its free swinging inset non-mortise configuration supports doors designed to sit inside the frame opening, which serves inset cabinetry layouts in kitchens, baths, or built-ins that call for recessed doors. The hinge is identified as a self mortise hinge 2-1/2 L x 1-1/2 W, so each leaf is sized to that footprint, letting you align it with typical cabinet door thicknesses and frame members used in woodworking projects.
The center hole frame wing for locking in after height is adjusted gives you a practical way to fix the hinge position once you are satisfied with the vertical alignment, so doors stay at the set height during ongoing use. That center hole in the frame wing adds a mechanical lock point after initial screw placement, which helps resist creep or sag from repeated opening and closing. As a free swinging hinge, it lets you judge clearances and reveals by simply moving the door through its travel by hand, making it easier to dial in the alignment before final tightening. The semi-concealed face-frame hinge classification also helps keep your layouts consistent, because hinges with the same basic geometry tend to share similar clearances, which reduces trial-and-error across a run of cabinets.
The hinge is categorized as a semi-concealed face-frame hinge, so it suits face-frame cabinet construction where part of the hinge is visible but most of the hardware remains discreet.
The inset non-mortise design supports doors that sit within the frame opening, allowing an inset appearance while relying on screw-on mounting instead of cutting mortises in the cabinet.
Self mortise hinge 2-1/2 L x 1-1/2 W describes the overall hinge size, helping you plan door and frame space so hinge leaves land properly on stile widths and rail heights.
The center hole frame wing for locking in after height is adjusted provides a locking point once alignment is set, helping hold the door at the chosen height over time.
The finial tip hinge design defines the barrel ends, so any exposed hinge barrel carries a finished look that can coordinate with other decorative hinge tips on nearby doors.
The free swinging hinge function lets the door move through its swing without built-in closing force, which is useful when door stop position or other components control the final resting point.
The P8293-VB Hickory Hardware free swinging inset non-mortise finial tip hinge from Belwith Keeler combines semi-concealed face-frame mounting, inset door support, and a self mortise hinge 2-1/2 L x 1-1/2 W footprint that clarifies sizing. The center hole frame wing for locking in after height is adjusted helps hold your alignment once set, while the finial tip and vintage bronze identity define the visible portions of the hinge. For projects calling for a semi-concealed non-mortise hinge with these characteristics, this part number provides a clearly defined option.
Sold In: 1 Pair